Recent development of an HTS power cable using YBCO tapes

M. Yagi, S. Mukoyama, H. Hirano, N. Amemiya, A. Ishiyama, S. Nagaya, N. Kashima, Y. Shiohara

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

Overcurrent characteristics and reduction of AC loss are essential for high temperature superconducting (HTS) cable in a real grid. AC loss in an HTS conductor using YBCO could be potentially small but protection for overcurrent was needed. A 0.1 mm thick copper tape soldered to the YBCO tape was effective as protection from overcurrent and did not affect the increase in AC loss. The 2 m HTS conductor with Cu strands of 250 mm2 and YBCO tapes with copper was fabricated. This conductor could withstand overcurrent of 31.5 kA for 2 s. To reduce AC loss, 10 mm wide YBCO tapes were divided into five strips using YAG laser. Using narrower strips and decreasing the space between the strips were effective in reducing AC loss. In consideration of this configuration, a three-layer conductor was fabricated, and AC loss of 0.054 W/m at 1 kA rms was achieved even though it had a small outer diameter of 19.6 mm.

Original languageEnglish
Pages (from-to)1154-1158
Number of pages5
JournalPhysica C: Superconductivity and its applications
Volume463-465
Issue numberSUPPL.
DOIs
Publication statusPublished - 2007 Oct 1

    Fingerprint

Keywords

  • AC loss
  • HTS conductor
  • High-T superconducting (HTS) cable
  • Overcurrent
  • YBCO

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Cite this

Yagi, M., Mukoyama, S., Hirano, H., Amemiya, N., Ishiyama, A., Nagaya, S., Kashima, N., & Shiohara, Y. (2007). Recent development of an HTS power cable using YBCO tapes. Physica C: Superconductivity and its applications, 463-465(SUPPL.), 1154-1158. https://doi.org/10.1016/j.physc.2007.04.255