Secondary reaction zones in coated 4th generation Ni-based blade alloys

Aya Suzuki, C. M.F. Rae, M. Yoshida, Y. Matsubara, Hideyuki Murakami

Research output: Contribution to conferencePaper

15 Citations (Scopus)

Abstract

The morphologies and growth kinetics of the Secondary Reaction Zone (SRZ) formed at the interface between the Pt-Aluminised coating and 4th generation Ni-base superalloy substrates have been investigated. Three alloys with systematically varying Ru content in the range of 2-5wt% were studied. Each alloy was tested using four different surface finishes prior to Pt coating. At the lowest Ru content sporadic formation of SRZ was observed, whilst in the higher Ru-containing alloys a continuous SRZ was formed. These alloys also showed more rapid SRZ growth, regardless of the original surface finish. The precipitation of TCPs in the substrate inhibited the growth of the SRZ towards the end of the exposure reversing the advantage of early nucleation. The volume fraction of the SRZ formation followed that in the substrate, reducing with Ru content. EBSD analysis revealed that the higher Ru-containing alloys nucleate many more grains of the SRZ but the number of grains adjusts with growth towards a constant grain size. On balance Ru leads to a deeper penetration depth into the substrate.

Original languageEnglish
Pages777-786
Number of pages10
Publication statusPublished - 2008 Dec 1
Externally publishedYes
Event11th International Symposium on Superalloys, Superalloys 2008 - Champion, PA, United States
Duration: 2008 Sep 142008 Sep 18

Other

Other11th International Symposium on Superalloys, Superalloys 2008
CountryUnited States
CityChampion, PA
Period08/9/1408/9/18

Fingerprint

blades
Substrates
Coatings
Growth kinetics
Superalloys
coatings
Volume fraction
reversing
Nucleation
heat resistant alloys
penetration
grain size
nucleation
kinetics

Keywords

  • Microstructure
  • Ni-base alloys
  • PtA1
  • SRZ

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics

Cite this

Suzuki, A., Rae, C. M. F., Yoshida, M., Matsubara, Y., & Murakami, H. (2008). Secondary reaction zones in coated 4th generation Ni-based blade alloys. 777-786. Paper presented at 11th International Symposium on Superalloys, Superalloys 2008, Champion, PA, United States.

Secondary reaction zones in coated 4th generation Ni-based blade alloys. / Suzuki, Aya; Rae, C. M.F.; Yoshida, M.; Matsubara, Y.; Murakami, Hideyuki.

2008. 777-786 Paper presented at 11th International Symposium on Superalloys, Superalloys 2008, Champion, PA, United States.

Research output: Contribution to conferencePaper

Suzuki, A, Rae, CMF, Yoshida, M, Matsubara, Y & Murakami, H 2008, 'Secondary reaction zones in coated 4th generation Ni-based blade alloys', Paper presented at 11th International Symposium on Superalloys, Superalloys 2008, Champion, PA, United States, 08/9/14 - 08/9/18 pp. 777-786.
Suzuki A, Rae CMF, Yoshida M, Matsubara Y, Murakami H. Secondary reaction zones in coated 4th generation Ni-based blade alloys. 2008. Paper presented at 11th International Symposium on Superalloys, Superalloys 2008, Champion, PA, United States.
Suzuki, Aya ; Rae, C. M.F. ; Yoshida, M. ; Matsubara, Y. ; Murakami, Hideyuki. / Secondary reaction zones in coated 4th generation Ni-based blade alloys. Paper presented at 11th International Symposium on Superalloys, Superalloys 2008, Champion, PA, United States.10 p.
@conference{924e383e8d004162a03f5262815f7ce6,
title = "Secondary reaction zones in coated 4th generation Ni-based blade alloys",
abstract = "The morphologies and growth kinetics of the Secondary Reaction Zone (SRZ) formed at the interface between the Pt-Aluminised coating and 4th generation Ni-base superalloy substrates have been investigated. Three alloys with systematically varying Ru content in the range of 2-5wt{\%} were studied. Each alloy was tested using four different surface finishes prior to Pt coating. At the lowest Ru content sporadic formation of SRZ was observed, whilst in the higher Ru-containing alloys a continuous SRZ was formed. These alloys also showed more rapid SRZ growth, regardless of the original surface finish. The precipitation of TCPs in the substrate inhibited the growth of the SRZ towards the end of the exposure reversing the advantage of early nucleation. The volume fraction of the SRZ formation followed that in the substrate, reducing with Ru content. EBSD analysis revealed that the higher Ru-containing alloys nucleate many more grains of the SRZ but the number of grains adjusts with growth towards a constant grain size. On balance Ru leads to a deeper penetration depth into the substrate.",
keywords = "Microstructure, Ni-base alloys, PtA1, SRZ",
author = "Aya Suzuki and Rae, {C. M.F.} and M. Yoshida and Y. Matsubara and Hideyuki Murakami",
year = "2008",
month = "12",
day = "1",
language = "English",
pages = "777--786",
note = "11th International Symposium on Superalloys, Superalloys 2008 ; Conference date: 14-09-2008 Through 18-09-2008",

}

TY - CONF

T1 - Secondary reaction zones in coated 4th generation Ni-based blade alloys

AU - Suzuki, Aya

AU - Rae, C. M.F.

AU - Yoshida, M.

AU - Matsubara, Y.

AU - Murakami, Hideyuki

PY - 2008/12/1

Y1 - 2008/12/1

N2 - The morphologies and growth kinetics of the Secondary Reaction Zone (SRZ) formed at the interface between the Pt-Aluminised coating and 4th generation Ni-base superalloy substrates have been investigated. Three alloys with systematically varying Ru content in the range of 2-5wt% were studied. Each alloy was tested using four different surface finishes prior to Pt coating. At the lowest Ru content sporadic formation of SRZ was observed, whilst in the higher Ru-containing alloys a continuous SRZ was formed. These alloys also showed more rapid SRZ growth, regardless of the original surface finish. The precipitation of TCPs in the substrate inhibited the growth of the SRZ towards the end of the exposure reversing the advantage of early nucleation. The volume fraction of the SRZ formation followed that in the substrate, reducing with Ru content. EBSD analysis revealed that the higher Ru-containing alloys nucleate many more grains of the SRZ but the number of grains adjusts with growth towards a constant grain size. On balance Ru leads to a deeper penetration depth into the substrate.

AB - The morphologies and growth kinetics of the Secondary Reaction Zone (SRZ) formed at the interface between the Pt-Aluminised coating and 4th generation Ni-base superalloy substrates have been investigated. Three alloys with systematically varying Ru content in the range of 2-5wt% were studied. Each alloy was tested using four different surface finishes prior to Pt coating. At the lowest Ru content sporadic formation of SRZ was observed, whilst in the higher Ru-containing alloys a continuous SRZ was formed. These alloys also showed more rapid SRZ growth, regardless of the original surface finish. The precipitation of TCPs in the substrate inhibited the growth of the SRZ towards the end of the exposure reversing the advantage of early nucleation. The volume fraction of the SRZ formation followed that in the substrate, reducing with Ru content. EBSD analysis revealed that the higher Ru-containing alloys nucleate many more grains of the SRZ but the number of grains adjusts with growth towards a constant grain size. On balance Ru leads to a deeper penetration depth into the substrate.

KW - Microstructure

KW - Ni-base alloys

KW - PtA1

KW - SRZ

UR - http://www.scopus.com/inward/record.url?scp=60349121588&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=60349121588&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:60349121588

SP - 777

EP - 786

ER -