Self-construction production scheduling system

Zhang Xuerui, Hai Xue, Yasuhiro Shimizu, Shigeru Fujimura

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

At present, many production scheduling systems have been developed. However, a lot of customization according to individual production environment is required, and then a large investment for development and maintenance is indispensable. Therefore now the direction to construct scheduling systems should be changed. The final objective of this research aims at developing a system which is built by it extracting the scheduling technique automatically through the daily production scheduling work, so that an investment will be decreased. This paper shows a prototype of Gantt Chart Interface System that emulates the production scheduling work on papers. Through the analysis of operator's operations, this paper proposes how to extract the master information required by production scheduling. Using the information, the scheduling operators can be supported to accelerate the scheduling work easily and accurately without any restriction of scheduling operations. By installing this extraction mechanism, it is easy to introduce scheduling system without a lot of expense for customization. In this paper, the extraction mechanism of the master information and operator support functions are proposed through a model expressing a scheduling problem.

Original languageEnglish
Title of host publication2006 IEEE International Conference on Automation Science and Engineering, CASE
Pages519-523
Number of pages5
DOIs
Publication statusPublished - 2007
Event2006 IEEE International Conference on Automation Science and Engineering, CASE - Shanghai
Duration: 2006 Oct 82006 Oct 10

Other

Other2006 IEEE International Conference on Automation Science and Engineering, CASE
CityShanghai
Period06/10/806/10/10

Fingerprint

Scheduling
Mathematical operators

Keywords

  • Gantt chart
  • Operation scheduling
  • Production management
  • Production scheduling
  • Self-construction system

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Cite this

Xuerui, Z., Xue, H., Shimizu, Y., & Fujimura, S. (2007). Self-construction production scheduling system. In 2006 IEEE International Conference on Automation Science and Engineering, CASE (pp. 519-523). [4120401] https://doi.org/10.1109/COASE.2006.326935

Self-construction production scheduling system. / Xuerui, Zhang; Xue, Hai; Shimizu, Yasuhiro; Fujimura, Shigeru.

2006 IEEE International Conference on Automation Science and Engineering, CASE. 2007. p. 519-523 4120401.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Xuerui, Z, Xue, H, Shimizu, Y & Fujimura, S 2007, Self-construction production scheduling system. in 2006 IEEE International Conference on Automation Science and Engineering, CASE., 4120401, pp. 519-523, 2006 IEEE International Conference on Automation Science and Engineering, CASE, Shanghai, 06/10/8. https://doi.org/10.1109/COASE.2006.326935
Xuerui Z, Xue H, Shimizu Y, Fujimura S. Self-construction production scheduling system. In 2006 IEEE International Conference on Automation Science and Engineering, CASE. 2007. p. 519-523. 4120401 https://doi.org/10.1109/COASE.2006.326935
Xuerui, Zhang ; Xue, Hai ; Shimizu, Yasuhiro ; Fujimura, Shigeru. / Self-construction production scheduling system. 2006 IEEE International Conference on Automation Science and Engineering, CASE. 2007. pp. 519-523
@inproceedings{880c4021552e430685d4c7e2a0a64208,
title = "Self-construction production scheduling system",
abstract = "At present, many production scheduling systems have been developed. However, a lot of customization according to individual production environment is required, and then a large investment for development and maintenance is indispensable. Therefore now the direction to construct scheduling systems should be changed. The final objective of this research aims at developing a system which is built by it extracting the scheduling technique automatically through the daily production scheduling work, so that an investment will be decreased. This paper shows a prototype of Gantt Chart Interface System that emulates the production scheduling work on papers. Through the analysis of operator's operations, this paper proposes how to extract the master information required by production scheduling. Using the information, the scheduling operators can be supported to accelerate the scheduling work easily and accurately without any restriction of scheduling operations. By installing this extraction mechanism, it is easy to introduce scheduling system without a lot of expense for customization. In this paper, the extraction mechanism of the master information and operator support functions are proposed through a model expressing a scheduling problem.",
keywords = "Gantt chart, Operation scheduling, Production management, Production scheduling, Self-construction system",
author = "Zhang Xuerui and Hai Xue and Yasuhiro Shimizu and Shigeru Fujimura",
year = "2007",
doi = "10.1109/COASE.2006.326935",
language = "English",
isbn = "1424403103",
pages = "519--523",
booktitle = "2006 IEEE International Conference on Automation Science and Engineering, CASE",

}

TY - GEN

T1 - Self-construction production scheduling system

AU - Xuerui, Zhang

AU - Xue, Hai

AU - Shimizu, Yasuhiro

AU - Fujimura, Shigeru

PY - 2007

Y1 - 2007

N2 - At present, many production scheduling systems have been developed. However, a lot of customization according to individual production environment is required, and then a large investment for development and maintenance is indispensable. Therefore now the direction to construct scheduling systems should be changed. The final objective of this research aims at developing a system which is built by it extracting the scheduling technique automatically through the daily production scheduling work, so that an investment will be decreased. This paper shows a prototype of Gantt Chart Interface System that emulates the production scheduling work on papers. Through the analysis of operator's operations, this paper proposes how to extract the master information required by production scheduling. Using the information, the scheduling operators can be supported to accelerate the scheduling work easily and accurately without any restriction of scheduling operations. By installing this extraction mechanism, it is easy to introduce scheduling system without a lot of expense for customization. In this paper, the extraction mechanism of the master information and operator support functions are proposed through a model expressing a scheduling problem.

AB - At present, many production scheduling systems have been developed. However, a lot of customization according to individual production environment is required, and then a large investment for development and maintenance is indispensable. Therefore now the direction to construct scheduling systems should be changed. The final objective of this research aims at developing a system which is built by it extracting the scheduling technique automatically through the daily production scheduling work, so that an investment will be decreased. This paper shows a prototype of Gantt Chart Interface System that emulates the production scheduling work on papers. Through the analysis of operator's operations, this paper proposes how to extract the master information required by production scheduling. Using the information, the scheduling operators can be supported to accelerate the scheduling work easily and accurately without any restriction of scheduling operations. By installing this extraction mechanism, it is easy to introduce scheduling system without a lot of expense for customization. In this paper, the extraction mechanism of the master information and operator support functions are proposed through a model expressing a scheduling problem.

KW - Gantt chart

KW - Operation scheduling

KW - Production management

KW - Production scheduling

KW - Self-construction system

UR - http://www.scopus.com/inward/record.url?scp=45149128193&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=45149128193&partnerID=8YFLogxK

U2 - 10.1109/COASE.2006.326935

DO - 10.1109/COASE.2006.326935

M3 - Conference contribution

SN - 1424403103

SN - 9781424403103

SP - 519

EP - 523

BT - 2006 IEEE International Conference on Automation Science and Engineering, CASE

ER -