Separation of binary azeotrope mixture via pressure-swing distillation with heat integration

Keigo Matsuda, Kejin Huang, Koichi Iwakabe, Masaru Nakaiwa

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

This paper addresses the addition of internal heat integration to the pressure-swing distillation (PSD) process used in the separation of binary pressure-sensitive azeotropes. The primary step in the process design is to determine the pressure elevation from the low-to high-pressure distillation columns, followed by the design of internal heat integration between the two distillation columns. A general procedure is suggested and illustrated through the separation of an acetonitrile-water binary mixture, which forms pressure-sensitive minimum-boiling azeotropes. Comparisons are made between the conventional and the internally heat integrated PSD processes. It is demonstrated that breaking pressure-sensitive azeotropic mixtures can be made more economical than the current practice with conventional PSD processes. However, the degree of cost reduction is strongly dependent upon the properties of the mixtures to be separated.

Original languageEnglish
Pages (from-to)969-975
Number of pages7
JournalJOURNAL OF CHEMICAL ENGINEERING OF JAPAN
Volume44
Issue number12
DOIs
Publication statusPublished - 2011
Externally publishedYes

Keywords

  • Cost estimation
  • Distillation
  • Heat integration
  • Pressure swing
  • Simulation

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)

Fingerprint Dive into the research topics of 'Separation of binary azeotrope mixture via pressure-swing distillation with heat integration'. Together they form a unique fingerprint.

  • Cite this