Simultaneous measurement of interdiffusion and intrinsic diffusion coefficients in liquid metals on the ground

Hideto Fukuda, Masato Shiinoki, Yuki Nishimura, Shinsuke Suzuki

    Research output: Contribution to journalArticle

    Abstract

    Simultaneous measurements of interdiffusion and intrinsic diffusion coefficients in liquid Sn-Pb were performed using the shear cell method and a stable density layering. The binary diffusion couples of Sn-Pb and Sn0.6Pb0.4-Sn0.4Pb0.6 were used in two experiments with the average molar fraction of diffusion couples NSn = 0.5. The concentration dependency of the interdiffusion coefficient was confirmed to exhibit a downward convexity through the comparison of the interdiffusion coefficients. However, the Boltzmann–Matano method reveals a diminished influence. The sample measurements of the intrinsic diffusion coefficients of a diffusion couple of pure metals demonstrate a dependency on concentration. On the other hand, the difference of diffusion coefficients was small in a diffusion couple of alloys. The difference between the values calculated by fitting the error function based on the superposition of fluxes and by the conventional analysis methods was small. We propose that a reasonable intrinsic diffusion coefficient can be calculated using the superposed equation of error function. The theoretical interdiffusion coefficients were calculated by substituting the measured intrinsic diffusion coefficients into the Darken's equation and comparing the results with the measured values. As a result, the difference between the theoretical and measured interdiffusion coefficients is not very large.

    Original languageEnglish
    Pages (from-to)531-541
    Number of pages11
    JournalInternational Journal of Heat and Mass Transfer
    DOIs
    Publication statusPublished - 2019 Apr 1

    Fingerprint

    liquid metals
    Liquid metals
    diffusion coefficient
    error functions
    coefficients
    convexity
    shear
    liquids
    cells
    metals
    Metals
    Fluxes
    Liquids

    Keywords

    • Boltzmann-Matano method
    • Darken's equation
    • Diffusion coefficient
    • Interdiffusion
    • Intrinsic diffusion
    • Liquid metal

    ASJC Scopus subject areas

    • Condensed Matter Physics
    • Mechanical Engineering
    • Fluid Flow and Transfer Processes

    Cite this

    Simultaneous measurement of interdiffusion and intrinsic diffusion coefficients in liquid metals on the ground. / Fukuda, Hideto; Shiinoki, Masato; Nishimura, Yuki; Suzuki, Shinsuke.

    In: International Journal of Heat and Mass Transfer, 01.04.2019, p. 531-541.

    Research output: Contribution to journalArticle

    @article{2998e1000bd148d6b7d568e5dca8a72c,
    title = "Simultaneous measurement of interdiffusion and intrinsic diffusion coefficients in liquid metals on the ground",
    abstract = "Simultaneous measurements of interdiffusion and intrinsic diffusion coefficients in liquid Sn-Pb were performed using the shear cell method and a stable density layering. The binary diffusion couples of Sn-Pb and Sn0.6Pb0.4-Sn0.4Pb0.6 were used in two experiments with the average molar fraction of diffusion couples NSn = 0.5. The concentration dependency of the interdiffusion coefficient was confirmed to exhibit a downward convexity through the comparison of the interdiffusion coefficients. However, the Boltzmann–Matano method reveals a diminished influence. The sample measurements of the intrinsic diffusion coefficients of a diffusion couple of pure metals demonstrate a dependency on concentration. On the other hand, the difference of diffusion coefficients was small in a diffusion couple of alloys. The difference between the values calculated by fitting the error function based on the superposition of fluxes and by the conventional analysis methods was small. We propose that a reasonable intrinsic diffusion coefficient can be calculated using the superposed equation of error function. The theoretical interdiffusion coefficients were calculated by substituting the measured intrinsic diffusion coefficients into the Darken's equation and comparing the results with the measured values. As a result, the difference between the theoretical and measured interdiffusion coefficients is not very large.",
    keywords = "Boltzmann-Matano method, Darken's equation, Diffusion coefficient, Interdiffusion, Intrinsic diffusion, Liquid metal",
    author = "Hideto Fukuda and Masato Shiinoki and Yuki Nishimura and Shinsuke Suzuki",
    year = "2019",
    month = "4",
    day = "1",
    doi = "10.1016/j.ijheatmasstransfer.2018.12.036",
    language = "English",
    pages = "531--541",
    journal = "International Journal of Heat and Mass Transfer",
    issn = "0017-9310",
    publisher = "Elsevier Limited",

    }

    TY - JOUR

    T1 - Simultaneous measurement of interdiffusion and intrinsic diffusion coefficients in liquid metals on the ground

    AU - Fukuda, Hideto

    AU - Shiinoki, Masato

    AU - Nishimura, Yuki

    AU - Suzuki, Shinsuke

    PY - 2019/4/1

    Y1 - 2019/4/1

    N2 - Simultaneous measurements of interdiffusion and intrinsic diffusion coefficients in liquid Sn-Pb were performed using the shear cell method and a stable density layering. The binary diffusion couples of Sn-Pb and Sn0.6Pb0.4-Sn0.4Pb0.6 were used in two experiments with the average molar fraction of diffusion couples NSn = 0.5. The concentration dependency of the interdiffusion coefficient was confirmed to exhibit a downward convexity through the comparison of the interdiffusion coefficients. However, the Boltzmann–Matano method reveals a diminished influence. The sample measurements of the intrinsic diffusion coefficients of a diffusion couple of pure metals demonstrate a dependency on concentration. On the other hand, the difference of diffusion coefficients was small in a diffusion couple of alloys. The difference between the values calculated by fitting the error function based on the superposition of fluxes and by the conventional analysis methods was small. We propose that a reasonable intrinsic diffusion coefficient can be calculated using the superposed equation of error function. The theoretical interdiffusion coefficients were calculated by substituting the measured intrinsic diffusion coefficients into the Darken's equation and comparing the results with the measured values. As a result, the difference between the theoretical and measured interdiffusion coefficients is not very large.

    AB - Simultaneous measurements of interdiffusion and intrinsic diffusion coefficients in liquid Sn-Pb were performed using the shear cell method and a stable density layering. The binary diffusion couples of Sn-Pb and Sn0.6Pb0.4-Sn0.4Pb0.6 were used in two experiments with the average molar fraction of diffusion couples NSn = 0.5. The concentration dependency of the interdiffusion coefficient was confirmed to exhibit a downward convexity through the comparison of the interdiffusion coefficients. However, the Boltzmann–Matano method reveals a diminished influence. The sample measurements of the intrinsic diffusion coefficients of a diffusion couple of pure metals demonstrate a dependency on concentration. On the other hand, the difference of diffusion coefficients was small in a diffusion couple of alloys. The difference between the values calculated by fitting the error function based on the superposition of fluxes and by the conventional analysis methods was small. We propose that a reasonable intrinsic diffusion coefficient can be calculated using the superposed equation of error function. The theoretical interdiffusion coefficients were calculated by substituting the measured intrinsic diffusion coefficients into the Darken's equation and comparing the results with the measured values. As a result, the difference between the theoretical and measured interdiffusion coefficients is not very large.

    KW - Boltzmann-Matano method

    KW - Darken's equation

    KW - Diffusion coefficient

    KW - Interdiffusion

    KW - Intrinsic diffusion

    KW - Liquid metal

    UR - http://www.scopus.com/inward/record.url?scp=85059128182&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=85059128182&partnerID=8YFLogxK

    U2 - 10.1016/j.ijheatmasstransfer.2018.12.036

    DO - 10.1016/j.ijheatmasstransfer.2018.12.036

    M3 - Article

    AN - SCOPUS:85059128182

    SP - 531

    EP - 541

    JO - International Journal of Heat and Mass Transfer

    JF - International Journal of Heat and Mass Transfer

    SN - 0017-9310

    ER -