Stabilization control method of output of photovoltaic generation systems using binary control

Yasuhiro Hayashi*, Shoji Kawasaki, Junya Matsuki, Masayuki Iwasaki, Toshihisa Funabashi, Yoshimichi Okuno, Takanori Hayashi

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

In this paper a method to stabilize total output of PV systems by controlling on/off of each PV system is proposed. In the proposed method, the total output of PV systems is controlled so as to fit the output target value by determining off status of each PV system at each time interval when the amount of total power generation exceeds the output target value. Based on measured output of each PV system in instantaneos value, on/off status of each PV system is determined taking into account delay time of control. In order to check the validity of the proposed stabilization control method, the numerical simulations are carried out for a 100 PV systems model. The effect of output fluctuation reduction is verified by changing the delay time of control. Furthermore the utilization ratio and 30 minutes output deviation of PV systems are evaluated for various output target value.

Original languageEnglish
Pages (from-to)1576-1584
Number of pages9
JournalIEEJ Transactions on Power and Energy
Volume129
Issue number12
DOIs
Publication statusPublished - 2009

Keywords

  • Binary control
  • Output target value
  • Photovoltaic generation
  • Stabilization of output

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Stabilization control method of output of photovoltaic generation systems using binary control'. Together they form a unique fingerprint.

Cite this