Strength and deformation of beam-to-column joints for offshore concrete structures.

O. Kiyomiya, H. Yokota, T. Yokoi

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

Discusses results of a study on the mechanical behaviour of joints in offshore structures under static loads. Five joints were studied: monolithic, cast in place concrete, adhesive, haunch and insertion (all joints between a beam and a column). Gives details of material properties, fabrication and load testing. Presents experimental results for applied load, deflection, strain of concrete, reinforcing, prestressing bars and crack widths. Compares results obtained with calculations. The limit state design method was applied for ultimate strength and crack width. Location of crack formation varied. Ultimate flexural moment of the connected specimen with adhesive joint was lower than those of the other specimens. (C.J.U.)

Original languageEnglish
Title of host publicationREPORT PORT & HARBOUR RES. INST.
Volume25
Edition3 , Sep. 1986, p.3-70.
Publication statusPublished - 1986
Externally publishedYes

Fingerprint

Concrete construction
Cast in place concrete
Cracks
Load testing
Adhesive joints
Prestressing
Offshore structures
Crack initiation
Loads (forces)
Adhesives
Materials properties
Concretes
Fabrication

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Kiyomiya, O., Yokota, H., & Yokoi, T. (1986). Strength and deformation of beam-to-column joints for offshore concrete structures. In REPORT PORT & HARBOUR RES. INST. (3 , Sep. 1986, p.3-70. ed., Vol. 25)

Strength and deformation of beam-to-column joints for offshore concrete structures. / Kiyomiya, O.; Yokota, H.; Yokoi, T.

REPORT PORT & HARBOUR RES. INST.. Vol. 25 3 , Sep. 1986, p.3-70. ed. 1986.

Research output: Chapter in Book/Report/Conference proceedingChapter

Kiyomiya, O, Yokota, H & Yokoi, T 1986, Strength and deformation of beam-to-column joints for offshore concrete structures. in REPORT PORT & HARBOUR RES. INST.. 3 , Sep. 1986, p.3-70. edn, vol. 25.
Kiyomiya O, Yokota H, Yokoi T. Strength and deformation of beam-to-column joints for offshore concrete structures. In REPORT PORT & HARBOUR RES. INST.. 3 , Sep. 1986, p.3-70. ed. Vol. 25. 1986
Kiyomiya, O. ; Yokota, H. ; Yokoi, T. / Strength and deformation of beam-to-column joints for offshore concrete structures. REPORT PORT & HARBOUR RES. INST.. Vol. 25 3 , Sep. 1986, p.3-70. ed. 1986.
@inbook{4a21a0d84af94287a84b0358d4dd98d4,
title = "Strength and deformation of beam-to-column joints for offshore concrete structures.",
abstract = "Discusses results of a study on the mechanical behaviour of joints in offshore structures under static loads. Five joints were studied: monolithic, cast in place concrete, adhesive, haunch and insertion (all joints between a beam and a column). Gives details of material properties, fabrication and load testing. Presents experimental results for applied load, deflection, strain of concrete, reinforcing, prestressing bars and crack widths. Compares results obtained with calculations. The limit state design method was applied for ultimate strength and crack width. Location of crack formation varied. Ultimate flexural moment of the connected specimen with adhesive joint was lower than those of the other specimens. (C.J.U.)",
author = "O. Kiyomiya and H. Yokota and T. Yokoi",
year = "1986",
language = "English",
volume = "25",
booktitle = "REPORT PORT & HARBOUR RES. INST.",
edition = "3 , Sep. 1986, p.3-70.",

}

TY - CHAP

T1 - Strength and deformation of beam-to-column joints for offshore concrete structures.

AU - Kiyomiya, O.

AU - Yokota, H.

AU - Yokoi, T.

PY - 1986

Y1 - 1986

N2 - Discusses results of a study on the mechanical behaviour of joints in offshore structures under static loads. Five joints were studied: monolithic, cast in place concrete, adhesive, haunch and insertion (all joints between a beam and a column). Gives details of material properties, fabrication and load testing. Presents experimental results for applied load, deflection, strain of concrete, reinforcing, prestressing bars and crack widths. Compares results obtained with calculations. The limit state design method was applied for ultimate strength and crack width. Location of crack formation varied. Ultimate flexural moment of the connected specimen with adhesive joint was lower than those of the other specimens. (C.J.U.)

AB - Discusses results of a study on the mechanical behaviour of joints in offshore structures under static loads. Five joints were studied: monolithic, cast in place concrete, adhesive, haunch and insertion (all joints between a beam and a column). Gives details of material properties, fabrication and load testing. Presents experimental results for applied load, deflection, strain of concrete, reinforcing, prestressing bars and crack widths. Compares results obtained with calculations. The limit state design method was applied for ultimate strength and crack width. Location of crack formation varied. Ultimate flexural moment of the connected specimen with adhesive joint was lower than those of the other specimens. (C.J.U.)

UR - http://www.scopus.com/inward/record.url?scp=0022452942&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022452942&partnerID=8YFLogxK

M3 - Chapter

VL - 25

BT - REPORT PORT & HARBOUR RES. INST.

ER -