Study on a control method of the power converter for constant power transmission by single-pulse PWM mode

Satoshi Kitazawa, Keiichiro Kondo, Takayuki Kashiwagi

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

In the case of contactless power transfer system with the electromagnetic induction, the coupling coefficient between the coils is reduced by the misalignment of the receiving coils. This results in reduction of the output voltage and the active power in the coils. To cope with this problem, an instantaneous current control method is applied to the PWM rectifier of a single-phase contactless power transformer system. The switching loss increases due to higher operating frequency. In this paper, PWM rectifier with the control method is operated with single-pulse PWM mode to reduce the switching losses. It is revealed by experimental tests over a power range of several tens of watts that the proposed control method is effective even if the PWM rectifier is operated with single-pulse mode.

Original languageEnglish
Title of host publication2013 15th European Conference on Power Electronics and Applications, EPE 2013
DOIs
Publication statusPublished - 2013 Dec 17
Externally publishedYes
Event2013 15th European Conference on Power Electronics and Applications, EPE 2013 - Lille, France
Duration: 2013 Sep 22013 Sep 6

Other

Other2013 15th European Conference on Power Electronics and Applications, EPE 2013
CountryFrance
CityLille
Period13/9/213/9/6

Fingerprint

Power converters
Power transmission
Pulse width modulation
Electromagnetic induction
Power transformers
Electric current control
Electric potential

Keywords

  • Converter control
  • Instantaneous current control method
  • Misalignment of the coil
  • PWM rectifier
  • Rail vehicle
  • Single phase system
  • Single-pulse PWM mode
  • Switching losses
  • Wireless power transmission

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Fuel Technology
  • Electrical and Electronic Engineering

Cite this

Kitazawa, S., Kondo, K., & Kashiwagi, T. (2013). Study on a control method of the power converter for constant power transmission by single-pulse PWM mode. In 2013 15th European Conference on Power Electronics and Applications, EPE 2013 [6634365] https://doi.org/10.1109/EPE.2013.6634365

Study on a control method of the power converter for constant power transmission by single-pulse PWM mode. / Kitazawa, Satoshi; Kondo, Keiichiro; Kashiwagi, Takayuki.

2013 15th European Conference on Power Electronics and Applications, EPE 2013. 2013. 6634365.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kitazawa, S, Kondo, K & Kashiwagi, T 2013, Study on a control method of the power converter for constant power transmission by single-pulse PWM mode. in 2013 15th European Conference on Power Electronics and Applications, EPE 2013., 6634365, 2013 15th European Conference on Power Electronics and Applications, EPE 2013, Lille, France, 13/9/2. https://doi.org/10.1109/EPE.2013.6634365
Kitazawa S, Kondo K, Kashiwagi T. Study on a control method of the power converter for constant power transmission by single-pulse PWM mode. In 2013 15th European Conference on Power Electronics and Applications, EPE 2013. 2013. 6634365 https://doi.org/10.1109/EPE.2013.6634365
Kitazawa, Satoshi ; Kondo, Keiichiro ; Kashiwagi, Takayuki. / Study on a control method of the power converter for constant power transmission by single-pulse PWM mode. 2013 15th European Conference on Power Electronics and Applications, EPE 2013. 2013.
@inproceedings{c7d07f5f251b4e96b812547e884440e3,
title = "Study on a control method of the power converter for constant power transmission by single-pulse PWM mode",
abstract = "In the case of contactless power transfer system with the electromagnetic induction, the coupling coefficient between the coils is reduced by the misalignment of the receiving coils. This results in reduction of the output voltage and the active power in the coils. To cope with this problem, an instantaneous current control method is applied to the PWM rectifier of a single-phase contactless power transformer system. The switching loss increases due to higher operating frequency. In this paper, PWM rectifier with the control method is operated with single-pulse PWM mode to reduce the switching losses. It is revealed by experimental tests over a power range of several tens of watts that the proposed control method is effective even if the PWM rectifier is operated with single-pulse mode.",
keywords = "Converter control, Instantaneous current control method, Misalignment of the coil, PWM rectifier, Rail vehicle, Single phase system, Single-pulse PWM mode, Switching losses, Wireless power transmission",
author = "Satoshi Kitazawa and Keiichiro Kondo and Takayuki Kashiwagi",
year = "2013",
month = "12",
day = "17",
doi = "10.1109/EPE.2013.6634365",
language = "English",
isbn = "9781479901166",
booktitle = "2013 15th European Conference on Power Electronics and Applications, EPE 2013",

}

TY - GEN

T1 - Study on a control method of the power converter for constant power transmission by single-pulse PWM mode

AU - Kitazawa, Satoshi

AU - Kondo, Keiichiro

AU - Kashiwagi, Takayuki

PY - 2013/12/17

Y1 - 2013/12/17

N2 - In the case of contactless power transfer system with the electromagnetic induction, the coupling coefficient between the coils is reduced by the misalignment of the receiving coils. This results in reduction of the output voltage and the active power in the coils. To cope with this problem, an instantaneous current control method is applied to the PWM rectifier of a single-phase contactless power transformer system. The switching loss increases due to higher operating frequency. In this paper, PWM rectifier with the control method is operated with single-pulse PWM mode to reduce the switching losses. It is revealed by experimental tests over a power range of several tens of watts that the proposed control method is effective even if the PWM rectifier is operated with single-pulse mode.

AB - In the case of contactless power transfer system with the electromagnetic induction, the coupling coefficient between the coils is reduced by the misalignment of the receiving coils. This results in reduction of the output voltage and the active power in the coils. To cope with this problem, an instantaneous current control method is applied to the PWM rectifier of a single-phase contactless power transformer system. The switching loss increases due to higher operating frequency. In this paper, PWM rectifier with the control method is operated with single-pulse PWM mode to reduce the switching losses. It is revealed by experimental tests over a power range of several tens of watts that the proposed control method is effective even if the PWM rectifier is operated with single-pulse mode.

KW - Converter control

KW - Instantaneous current control method

KW - Misalignment of the coil

KW - PWM rectifier

KW - Rail vehicle

KW - Single phase system

KW - Single-pulse PWM mode

KW - Switching losses

KW - Wireless power transmission

UR - http://www.scopus.com/inward/record.url?scp=84890142485&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84890142485&partnerID=8YFLogxK

U2 - 10.1109/EPE.2013.6634365

DO - 10.1109/EPE.2013.6634365

M3 - Conference contribution

SN - 9781479901166

BT - 2013 15th European Conference on Power Electronics and Applications, EPE 2013

ER -