Study on the bending mechanical model of segmental joint in shield tunnel with large cross-section

Si Jin Liu, Kun Feng, Chuan He, Zheng Shu He

Research output: Contribution to journalArticle

11 Citations (Scopus)

Abstract

With the consideration of the influence of the detailed structure of joint surface, the non-linear mechanical property of concrete and transferring cushion, the load transmission distinction with joint surface and the impact of pre-tightened joint bolt, the bending mechanical model of segmental joint, which could characterize the crack and crush of concrete, the yield of bolt and the damage of segmental joint, is established for the segment joint with complex joint surface in large cross-section shield tunnel. Then the flexural behavior of segmental joint in shield tunnel with large cross-section is analyzed using full-scale test of segmental joint bending. The results show that the maximum opening of joint surface grows slowly under small moment, while it increases significantly when the bending moment exceeds a certain value. After the joint opening becomes wide enough and the bolt is in tension, the growth rate of joint opening height gradually decreases and approaches a stable value. The time of joint surface opening and the bolt becoming loaded under the action of negative curvature is later than positive bending state. Meanwhile, with the axial force increasing, the time of joint surface opening is later and the opening height is smaller than that under the same moment. The bending stiffness of segmental joint shows nonlinear descent with the moment growing, while the higher axial force is more favorable to maintaining the bending stiffness stability. A larger the axial force results in a longer flexural capacity of joint surface. The results can provide guidance and reference for segmental joint design for large cross-section shield tunnel.

Original languageEnglish
Pages (from-to)215-221
Number of pages7
JournalGongcheng Lixue/Engineering Mechanics
Volume32
Issue number12
DOIs
Publication statusPublished - 2015 Dec 1
Externally publishedYes

Fingerprint

Tunnels
Bolts
Stiffness
Concretes
Bending moments
Loads (forces)
Cracks
Mechanical properties

Keywords

  • Bending mechanical model
  • Cracking destruction
  • Joint bending test
  • Segmental joint
  • Shield tunnel

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials

Cite this

Study on the bending mechanical model of segmental joint in shield tunnel with large cross-section. / Liu, Si Jin; Feng, Kun; He, Chuan; He, Zheng Shu.

In: Gongcheng Lixue/Engineering Mechanics, Vol. 32, No. 12, 01.12.2015, p. 215-221.

Research output: Contribution to journalArticle

@article{386d6faefc0f42f1bb304c8077131148,
title = "Study on the bending mechanical model of segmental joint in shield tunnel with large cross-section",
abstract = "With the consideration of the influence of the detailed structure of joint surface, the non-linear mechanical property of concrete and transferring cushion, the load transmission distinction with joint surface and the impact of pre-tightened joint bolt, the bending mechanical model of segmental joint, which could characterize the crack and crush of concrete, the yield of bolt and the damage of segmental joint, is established for the segment joint with complex joint surface in large cross-section shield tunnel. Then the flexural behavior of segmental joint in shield tunnel with large cross-section is analyzed using full-scale test of segmental joint bending. The results show that the maximum opening of joint surface grows slowly under small moment, while it increases significantly when the bending moment exceeds a certain value. After the joint opening becomes wide enough and the bolt is in tension, the growth rate of joint opening height gradually decreases and approaches a stable value. The time of joint surface opening and the bolt becoming loaded under the action of negative curvature is later than positive bending state. Meanwhile, with the axial force increasing, the time of joint surface opening is later and the opening height is smaller than that under the same moment. The bending stiffness of segmental joint shows nonlinear descent with the moment growing, while the higher axial force is more favorable to maintaining the bending stiffness stability. A larger the axial force results in a longer flexural capacity of joint surface. The results can provide guidance and reference for segmental joint design for large cross-section shield tunnel.",
keywords = "Bending mechanical model, Cracking destruction, Joint bending test, Segmental joint, Shield tunnel",
author = "Liu, {Si Jin} and Kun Feng and Chuan He and He, {Zheng Shu}",
year = "2015",
month = "12",
day = "1",
doi = "10.6052/j.issn.1000-4750.2014.07.0599",
language = "English",
volume = "32",
pages = "215--221",
journal = "Gong Cheng Li Xue/Engineering Mechanics",
issn = "1000-4750",
publisher = "Tsing Hua University",
number = "12",

}

TY - JOUR

T1 - Study on the bending mechanical model of segmental joint in shield tunnel with large cross-section

AU - Liu, Si Jin

AU - Feng, Kun

AU - He, Chuan

AU - He, Zheng Shu

PY - 2015/12/1

Y1 - 2015/12/1

N2 - With the consideration of the influence of the detailed structure of joint surface, the non-linear mechanical property of concrete and transferring cushion, the load transmission distinction with joint surface and the impact of pre-tightened joint bolt, the bending mechanical model of segmental joint, which could characterize the crack and crush of concrete, the yield of bolt and the damage of segmental joint, is established for the segment joint with complex joint surface in large cross-section shield tunnel. Then the flexural behavior of segmental joint in shield tunnel with large cross-section is analyzed using full-scale test of segmental joint bending. The results show that the maximum opening of joint surface grows slowly under small moment, while it increases significantly when the bending moment exceeds a certain value. After the joint opening becomes wide enough and the bolt is in tension, the growth rate of joint opening height gradually decreases and approaches a stable value. The time of joint surface opening and the bolt becoming loaded under the action of negative curvature is later than positive bending state. Meanwhile, with the axial force increasing, the time of joint surface opening is later and the opening height is smaller than that under the same moment. The bending stiffness of segmental joint shows nonlinear descent with the moment growing, while the higher axial force is more favorable to maintaining the bending stiffness stability. A larger the axial force results in a longer flexural capacity of joint surface. The results can provide guidance and reference for segmental joint design for large cross-section shield tunnel.

AB - With the consideration of the influence of the detailed structure of joint surface, the non-linear mechanical property of concrete and transferring cushion, the load transmission distinction with joint surface and the impact of pre-tightened joint bolt, the bending mechanical model of segmental joint, which could characterize the crack and crush of concrete, the yield of bolt and the damage of segmental joint, is established for the segment joint with complex joint surface in large cross-section shield tunnel. Then the flexural behavior of segmental joint in shield tunnel with large cross-section is analyzed using full-scale test of segmental joint bending. The results show that the maximum opening of joint surface grows slowly under small moment, while it increases significantly when the bending moment exceeds a certain value. After the joint opening becomes wide enough and the bolt is in tension, the growth rate of joint opening height gradually decreases and approaches a stable value. The time of joint surface opening and the bolt becoming loaded under the action of negative curvature is later than positive bending state. Meanwhile, with the axial force increasing, the time of joint surface opening is later and the opening height is smaller than that under the same moment. The bending stiffness of segmental joint shows nonlinear descent with the moment growing, while the higher axial force is more favorable to maintaining the bending stiffness stability. A larger the axial force results in a longer flexural capacity of joint surface. The results can provide guidance and reference for segmental joint design for large cross-section shield tunnel.

KW - Bending mechanical model

KW - Cracking destruction

KW - Joint bending test

KW - Segmental joint

KW - Shield tunnel

UR - http://www.scopus.com/inward/record.url?scp=84953396342&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84953396342&partnerID=8YFLogxK

U2 - 10.6052/j.issn.1000-4750.2014.07.0599

DO - 10.6052/j.issn.1000-4750.2014.07.0599

M3 - Article

VL - 32

SP - 215

EP - 221

JO - Gong Cheng Li Xue/Engineering Mechanics

JF - Gong Cheng Li Xue/Engineering Mechanics

SN - 1000-4750

IS - 12

ER -