Susceptibility to hydrogen absorption and hydrogen thermal desorption of titanium alloys immersed in neutral fluoride solution under applied potential

Ken'ichi Yokoyama, Katsutoshi Takashima, Jun'ichi Sakai

    Research output: Contribution to journalArticle

    3 Citations (Scopus)

    Abstract

    The susceptibility to hydrogen absorption and hydrogen thermal desorption of titanium alloys has been investigated in a neutral 2.0% NaF solution at 37°C under various applied cathodic potentials. Ti-0.2Pd, Ti-6A1-4V and Ti-11.3Mo-6.6Zr-4.3Sn alloys absorb hydrogen under less noble potentials than -1.5 V, -1.9 V and -1.4 V versus a saturated calomel electrode, respectively. The amounts of absorbed hydrogen of Ti-0.2Pd, Ti-6A14V and Ti-11.3Mo-6.6Zr-4.3Sn alloys under an applied potential of -2.0V for 24h are approximately 1200, 100 and 1100 mass ppm, respectively. Upon immersion in the 2.0% NaF solution under an applied potential, the hydrogen thermal desorption behavior of Ti-0.2Pd alloy differs from those immersed in acid fluoride solutions, whereas the hydrogen thermal desorption behaviors of Ti-6A1-4V and Ti-11.3Mo-6.6Zr-4.3Sn alloys are similar to those immersed in acid fluoride solutions. The present results indicate that in a neutral fluoride solution, the effects of an applied potential on the hydrogen absorption and desorption behaviors of Ti-6A1-4V alloy are considerably smaller than those of commercial pure titanium reported previously, Ti-0.2Pd and Ti-11.3Mo-6.6Zr-4.3Sn alloys.

    Original languageEnglish
    Pages (from-to)1661-1666
    Number of pages6
    JournalMaterials Transactions
    Volume49
    Issue number7
    DOIs
    Publication statusPublished - 2008 Jul

    Fingerprint

    Thermal desorption
    titanium alloys
    Fluorides
    Titanium alloys
    fluorides
    Hydrogen
    desorption
    magnetic permeability
    hydrogen
    acids
    Acids
    Titanium
    submerging
    Desorption
    titanium
    Electrodes
    electrodes

    Keywords

    • Corrosion
    • Fluoride
    • Hydrogen embrittlement
    • Thermal desorption analysis
    • Titanium

    ASJC Scopus subject areas

    • Materials Science(all)
    • Metals and Alloys

    Cite this

    Susceptibility to hydrogen absorption and hydrogen thermal desorption of titanium alloys immersed in neutral fluoride solution under applied potential. / Yokoyama, Ken'ichi; Takashima, Katsutoshi; Sakai, Jun'ichi.

    In: Materials Transactions, Vol. 49, No. 7, 07.2008, p. 1661-1666.

    Research output: Contribution to journalArticle

    @article{bb09aaefeff241428b03708362bee10a,
    title = "Susceptibility to hydrogen absorption and hydrogen thermal desorption of titanium alloys immersed in neutral fluoride solution under applied potential",
    abstract = "The susceptibility to hydrogen absorption and hydrogen thermal desorption of titanium alloys has been investigated in a neutral 2.0{\%} NaF solution at 37°C under various applied cathodic potentials. Ti-0.2Pd, Ti-6A1-4V and Ti-11.3Mo-6.6Zr-4.3Sn alloys absorb hydrogen under less noble potentials than -1.5 V, -1.9 V and -1.4 V versus a saturated calomel electrode, respectively. The amounts of absorbed hydrogen of Ti-0.2Pd, Ti-6A14V and Ti-11.3Mo-6.6Zr-4.3Sn alloys under an applied potential of -2.0V for 24h are approximately 1200, 100 and 1100 mass ppm, respectively. Upon immersion in the 2.0{\%} NaF solution under an applied potential, the hydrogen thermal desorption behavior of Ti-0.2Pd alloy differs from those immersed in acid fluoride solutions, whereas the hydrogen thermal desorption behaviors of Ti-6A1-4V and Ti-11.3Mo-6.6Zr-4.3Sn alloys are similar to those immersed in acid fluoride solutions. The present results indicate that in a neutral fluoride solution, the effects of an applied potential on the hydrogen absorption and desorption behaviors of Ti-6A1-4V alloy are considerably smaller than those of commercial pure titanium reported previously, Ti-0.2Pd and Ti-11.3Mo-6.6Zr-4.3Sn alloys.",
    keywords = "Corrosion, Fluoride, Hydrogen embrittlement, Thermal desorption analysis, Titanium",
    author = "Ken'ichi Yokoyama and Katsutoshi Takashima and Jun'ichi Sakai",
    year = "2008",
    month = "7",
    doi = "10.2320/matertrans.MRA2008083",
    language = "English",
    volume = "49",
    pages = "1661--1666",
    journal = "Materials Transactions",
    issn = "1345-9678",
    publisher = "Japan Institute of Metals (JIM)",
    number = "7",

    }

    TY - JOUR

    T1 - Susceptibility to hydrogen absorption and hydrogen thermal desorption of titanium alloys immersed in neutral fluoride solution under applied potential

    AU - Yokoyama, Ken'ichi

    AU - Takashima, Katsutoshi

    AU - Sakai, Jun'ichi

    PY - 2008/7

    Y1 - 2008/7

    N2 - The susceptibility to hydrogen absorption and hydrogen thermal desorption of titanium alloys has been investigated in a neutral 2.0% NaF solution at 37°C under various applied cathodic potentials. Ti-0.2Pd, Ti-6A1-4V and Ti-11.3Mo-6.6Zr-4.3Sn alloys absorb hydrogen under less noble potentials than -1.5 V, -1.9 V and -1.4 V versus a saturated calomel electrode, respectively. The amounts of absorbed hydrogen of Ti-0.2Pd, Ti-6A14V and Ti-11.3Mo-6.6Zr-4.3Sn alloys under an applied potential of -2.0V for 24h are approximately 1200, 100 and 1100 mass ppm, respectively. Upon immersion in the 2.0% NaF solution under an applied potential, the hydrogen thermal desorption behavior of Ti-0.2Pd alloy differs from those immersed in acid fluoride solutions, whereas the hydrogen thermal desorption behaviors of Ti-6A1-4V and Ti-11.3Mo-6.6Zr-4.3Sn alloys are similar to those immersed in acid fluoride solutions. The present results indicate that in a neutral fluoride solution, the effects of an applied potential on the hydrogen absorption and desorption behaviors of Ti-6A1-4V alloy are considerably smaller than those of commercial pure titanium reported previously, Ti-0.2Pd and Ti-11.3Mo-6.6Zr-4.3Sn alloys.

    AB - The susceptibility to hydrogen absorption and hydrogen thermal desorption of titanium alloys has been investigated in a neutral 2.0% NaF solution at 37°C under various applied cathodic potentials. Ti-0.2Pd, Ti-6A1-4V and Ti-11.3Mo-6.6Zr-4.3Sn alloys absorb hydrogen under less noble potentials than -1.5 V, -1.9 V and -1.4 V versus a saturated calomel electrode, respectively. The amounts of absorbed hydrogen of Ti-0.2Pd, Ti-6A14V and Ti-11.3Mo-6.6Zr-4.3Sn alloys under an applied potential of -2.0V for 24h are approximately 1200, 100 and 1100 mass ppm, respectively. Upon immersion in the 2.0% NaF solution under an applied potential, the hydrogen thermal desorption behavior of Ti-0.2Pd alloy differs from those immersed in acid fluoride solutions, whereas the hydrogen thermal desorption behaviors of Ti-6A1-4V and Ti-11.3Mo-6.6Zr-4.3Sn alloys are similar to those immersed in acid fluoride solutions. The present results indicate that in a neutral fluoride solution, the effects of an applied potential on the hydrogen absorption and desorption behaviors of Ti-6A1-4V alloy are considerably smaller than those of commercial pure titanium reported previously, Ti-0.2Pd and Ti-11.3Mo-6.6Zr-4.3Sn alloys.

    KW - Corrosion

    KW - Fluoride

    KW - Hydrogen embrittlement

    KW - Thermal desorption analysis

    KW - Titanium

    UR - http://www.scopus.com/inward/record.url?scp=50549088424&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=50549088424&partnerID=8YFLogxK

    U2 - 10.2320/matertrans.MRA2008083

    DO - 10.2320/matertrans.MRA2008083

    M3 - Article

    VL - 49

    SP - 1661

    EP - 1666

    JO - Materials Transactions

    JF - Materials Transactions

    SN - 1345-9678

    IS - 7

    ER -