Symmetric kinematic formulation and non-master/slave coordinated control of two-arm robots

Yoshihiro Sakakibara, Kazutoshi Kan, Yuuji Hosoda, Makoto Hattori, Masakatsu Fujie, Masaru Uchiyama, Pierre Dauchez

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

This paper deals with the design of the foot trajectory for a quadruped walking machine. Such walking machines should be capable of both uneven terrain walking and high-speed flat surface walking. The static walking method was used for uneven terrain walking and the dynamic walking method was used for plane walking. In the case of dynamic walking, the relative speed between the foot and the ground causes instability in the balance of the body. A foot trajectory is designed based on two points: the kinematics of foot motion and the relationship between joint motion and joint driving torque. A method for reducing the impact force upon initial contact with a floor by designing a periodic foot trajectory based on the wave motion of a cam is discussed. In this method, vertical and horizontal motions of the foot trajectory were generated independently using cycloidic motion. We named this trajectory the composite cycloid foot trajectory. We further developed a modified cycloidic foot trajectory by smoothing the joint angular acceleration. robots are studied from the standpoints of statics and kinematics; coordinates to describe these tasks are derived theoretically, on which forces, velocities, and positions are defined consistently. Based on those results, a hybrid position/force control scheme which distinguishes neither a master robot nor a slave robot is presented for the coordination of the two robots. In the static and kinematic analyses, the concept of a 'virtual stick' is introduced, which is used to make the motions of the two robots be considered at the centre of the object. Thus, use of the matrix pseudo-inverse technique decouples the motions into absolute and relative motions. Generalized forces, velocities, and positions are derived theoretically in those decoupled subspaces. These forces, velocities, and positions are symmetric functions of the jointspace forces, velocities, and positions.

Original languageEnglish
Pages (from-to)343-360
Number of pages18
JournalAdvanced Robotics
Volume7
Issue number4
Publication statusPublished - 1993
Externally publishedYes

Fingerprint

Kinematics
Trajectories
Robots
Cams
Force control
Position control
Torque
Composite materials

ASJC Scopus subject areas

  • Control and Systems Engineering

Cite this

Sakakibara, Y., Kan, K., Hosoda, Y., Hattori, M., Fujie, M., Uchiyama, M., & Dauchez, P. (1993). Symmetric kinematic formulation and non-master/slave coordinated control of two-arm robots. Advanced Robotics, 7(4), 343-360.

Symmetric kinematic formulation and non-master/slave coordinated control of two-arm robots. / Sakakibara, Yoshihiro; Kan, Kazutoshi; Hosoda, Yuuji; Hattori, Makoto; Fujie, Masakatsu; Uchiyama, Masaru; Dauchez, Pierre.

In: Advanced Robotics, Vol. 7, No. 4, 1993, p. 343-360.

Research output: Contribution to journalArticle

Sakakibara, Y, Kan, K, Hosoda, Y, Hattori, M, Fujie, M, Uchiyama, M & Dauchez, P 1993, 'Symmetric kinematic formulation and non-master/slave coordinated control of two-arm robots', Advanced Robotics, vol. 7, no. 4, pp. 343-360.
Sakakibara Y, Kan K, Hosoda Y, Hattori M, Fujie M, Uchiyama M et al. Symmetric kinematic formulation and non-master/slave coordinated control of two-arm robots. Advanced Robotics. 1993;7(4):343-360.
Sakakibara, Yoshihiro ; Kan, Kazutoshi ; Hosoda, Yuuji ; Hattori, Makoto ; Fujie, Masakatsu ; Uchiyama, Masaru ; Dauchez, Pierre. / Symmetric kinematic formulation and non-master/slave coordinated control of two-arm robots. In: Advanced Robotics. 1993 ; Vol. 7, No. 4. pp. 343-360.
@article{ab501625c8f7453aad970600a8c03b57,
title = "Symmetric kinematic formulation and non-master/slave coordinated control of two-arm robots",
abstract = "This paper deals with the design of the foot trajectory for a quadruped walking machine. Such walking machines should be capable of both uneven terrain walking and high-speed flat surface walking. The static walking method was used for uneven terrain walking and the dynamic walking method was used for plane walking. In the case of dynamic walking, the relative speed between the foot and the ground causes instability in the balance of the body. A foot trajectory is designed based on two points: the kinematics of foot motion and the relationship between joint motion and joint driving torque. A method for reducing the impact force upon initial contact with a floor by designing a periodic foot trajectory based on the wave motion of a cam is discussed. In this method, vertical and horizontal motions of the foot trajectory were generated independently using cycloidic motion. We named this trajectory the composite cycloid foot trajectory. We further developed a modified cycloidic foot trajectory by smoothing the joint angular acceleration. robots are studied from the standpoints of statics and kinematics; coordinates to describe these tasks are derived theoretically, on which forces, velocities, and positions are defined consistently. Based on those results, a hybrid position/force control scheme which distinguishes neither a master robot nor a slave robot is presented for the coordination of the two robots. In the static and kinematic analyses, the concept of a 'virtual stick' is introduced, which is used to make the motions of the two robots be considered at the centre of the object. Thus, use of the matrix pseudo-inverse technique decouples the motions into absolute and relative motions. Generalized forces, velocities, and positions are derived theoretically in those decoupled subspaces. These forces, velocities, and positions are symmetric functions of the jointspace forces, velocities, and positions.",
author = "Yoshihiro Sakakibara and Kazutoshi Kan and Yuuji Hosoda and Makoto Hattori and Masakatsu Fujie and Masaru Uchiyama and Pierre Dauchez",
year = "1993",
language = "English",
volume = "7",
pages = "343--360",
journal = "Advanced Robotics",
issn = "0169-1864",
publisher = "Taylor and Francis Ltd.",
number = "4",

}

TY - JOUR

T1 - Symmetric kinematic formulation and non-master/slave coordinated control of two-arm robots

AU - Sakakibara, Yoshihiro

AU - Kan, Kazutoshi

AU - Hosoda, Yuuji

AU - Hattori, Makoto

AU - Fujie, Masakatsu

AU - Uchiyama, Masaru

AU - Dauchez, Pierre

PY - 1993

Y1 - 1993

N2 - This paper deals with the design of the foot trajectory for a quadruped walking machine. Such walking machines should be capable of both uneven terrain walking and high-speed flat surface walking. The static walking method was used for uneven terrain walking and the dynamic walking method was used for plane walking. In the case of dynamic walking, the relative speed between the foot and the ground causes instability in the balance of the body. A foot trajectory is designed based on two points: the kinematics of foot motion and the relationship between joint motion and joint driving torque. A method for reducing the impact force upon initial contact with a floor by designing a periodic foot trajectory based on the wave motion of a cam is discussed. In this method, vertical and horizontal motions of the foot trajectory were generated independently using cycloidic motion. We named this trajectory the composite cycloid foot trajectory. We further developed a modified cycloidic foot trajectory by smoothing the joint angular acceleration. robots are studied from the standpoints of statics and kinematics; coordinates to describe these tasks are derived theoretically, on which forces, velocities, and positions are defined consistently. Based on those results, a hybrid position/force control scheme which distinguishes neither a master robot nor a slave robot is presented for the coordination of the two robots. In the static and kinematic analyses, the concept of a 'virtual stick' is introduced, which is used to make the motions of the two robots be considered at the centre of the object. Thus, use of the matrix pseudo-inverse technique decouples the motions into absolute and relative motions. Generalized forces, velocities, and positions are derived theoretically in those decoupled subspaces. These forces, velocities, and positions are symmetric functions of the jointspace forces, velocities, and positions.

AB - This paper deals with the design of the foot trajectory for a quadruped walking machine. Such walking machines should be capable of both uneven terrain walking and high-speed flat surface walking. The static walking method was used for uneven terrain walking and the dynamic walking method was used for plane walking. In the case of dynamic walking, the relative speed between the foot and the ground causes instability in the balance of the body. A foot trajectory is designed based on two points: the kinematics of foot motion and the relationship between joint motion and joint driving torque. A method for reducing the impact force upon initial contact with a floor by designing a periodic foot trajectory based on the wave motion of a cam is discussed. In this method, vertical and horizontal motions of the foot trajectory were generated independently using cycloidic motion. We named this trajectory the composite cycloid foot trajectory. We further developed a modified cycloidic foot trajectory by smoothing the joint angular acceleration. robots are studied from the standpoints of statics and kinematics; coordinates to describe these tasks are derived theoretically, on which forces, velocities, and positions are defined consistently. Based on those results, a hybrid position/force control scheme which distinguishes neither a master robot nor a slave robot is presented for the coordination of the two robots. In the static and kinematic analyses, the concept of a 'virtual stick' is introduced, which is used to make the motions of the two robots be considered at the centre of the object. Thus, use of the matrix pseudo-inverse technique decouples the motions into absolute and relative motions. Generalized forces, velocities, and positions are derived theoretically in those decoupled subspaces. These forces, velocities, and positions are symmetric functions of the jointspace forces, velocities, and positions.

UR - http://www.scopus.com/inward/record.url?scp=0027813457&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027813457&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0027813457

VL - 7

SP - 343

EP - 360

JO - Advanced Robotics

JF - Advanced Robotics

SN - 0169-1864

IS - 4

ER -