Synthesis and characterization of star-shaped poly(ethylene-co-propylene) polymers bearing terminal self-complementary multiple hydrogen-bonding sites

Casey L. Elkins, Kalpana Viswanathan, Timothy Edward Long

Research output: Contribution to journalArticle

41 Citations (Scopus)

Abstract

The polymerization of isoprene was initiated with 3-(tert- butyldimethylsilyloxy)-1-propyllithium (TBDMSPrLi), which contained a silyl-protected hydroxyl functionality. Living poly(isoprenyllithium) with controlled molecular weight and narrow molecular weight distribution coupled efficiently with divinylbenzene to form well-defined star-shaped polymers. Both linear and star-shaped polymers were subsequently hydrogenated to poly(ethylene-co-propylene) and deprotected quantitatively to yield terminal primary hydroxyl functionality. High conversions of hydroxyl functionality to the 2-ureido-4[1H]-pyrimidinone (UPy) quadruple hydrogen-bonding group were achieved using isocyanate coupling and subsequent reaction with 6-methylisocytosine. Nonfunctionalized and UPy-functionalized linear and star-shaped poly(ethylene-co-propylene)s were characterized using 1H NMR spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), tensile testing, and melt rheology. The observed glass transition temperatures were independent of molecular architecture for the UPy-functionalized polymers and nonfunctionalized analogues using both DSC and DMA. Tensile testing revealed the UPy-functionalized star polymers (UPy-Star) exhibited a higher Young's modulus and lower percent elongation at failure compared to the UPy-telechelic polymers with M n of 24 000 g/mol (UPy-24K-T) analogues. UPy-Star polymer exhibited a rubbery plateau region over a well-defined frequency range, and in contrast, the UPy-functionalized linear polymers were in the terminal flow regime, which suggested greater association for the star-shaped polymers. In addition, complex viscosity data revealed a non-Newtonian behavior for the star-shaped polymers in contrast to linear analogues, which is also consistent with a highly associated structure.

Original languageEnglish
Pages (from-to)3132-3139
Number of pages8
JournalMacromolecules
Volume39
Issue number9
DOIs
Publication statusPublished - 2006 May 2
Externally publishedYes

Fingerprint

Bearings (structural)
Polypropylenes
Propylene
Stars
Hydrogen bonds
Polymers
Ethylene
Hydroxyl Radical
divinyl benzene
Tensile testing
Dynamic mechanical analysis
Differential scanning calorimetry
Pyrimidinones
ethylene
Isocyanates
Isoprene
Molecular weight distribution
Rheology
Nuclear magnetic resonance spectroscopy
Elongation

ASJC Scopus subject areas

  • Organic Chemistry
  • Polymers and Plastics
  • Inorganic Chemistry
  • Materials Chemistry

Cite this

Synthesis and characterization of star-shaped poly(ethylene-co-propylene) polymers bearing terminal self-complementary multiple hydrogen-bonding sites. / Elkins, Casey L.; Viswanathan, Kalpana; Long, Timothy Edward.

In: Macromolecules, Vol. 39, No. 9, 02.05.2006, p. 3132-3139.

Research output: Contribution to journalArticle

Elkins, Casey L. ; Viswanathan, Kalpana ; Long, Timothy Edward. / Synthesis and characterization of star-shaped poly(ethylene-co-propylene) polymers bearing terminal self-complementary multiple hydrogen-bonding sites. In: Macromolecules. 2006 ; Vol. 39, No. 9. pp. 3132-3139.
@article{34d2f77911d442efad1126ea55545bcb,
title = "Synthesis and characterization of star-shaped poly(ethylene-co-propylene) polymers bearing terminal self-complementary multiple hydrogen-bonding sites",
abstract = "The polymerization of isoprene was initiated with 3-(tert- butyldimethylsilyloxy)-1-propyllithium (TBDMSPrLi), which contained a silyl-protected hydroxyl functionality. Living poly(isoprenyllithium) with controlled molecular weight and narrow molecular weight distribution coupled efficiently with divinylbenzene to form well-defined star-shaped polymers. Both linear and star-shaped polymers were subsequently hydrogenated to poly(ethylene-co-propylene) and deprotected quantitatively to yield terminal primary hydroxyl functionality. High conversions of hydroxyl functionality to the 2-ureido-4[1H]-pyrimidinone (UPy) quadruple hydrogen-bonding group were achieved using isocyanate coupling and subsequent reaction with 6-methylisocytosine. Nonfunctionalized and UPy-functionalized linear and star-shaped poly(ethylene-co-propylene)s were characterized using 1H NMR spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), tensile testing, and melt rheology. The observed glass transition temperatures were independent of molecular architecture for the UPy-functionalized polymers and nonfunctionalized analogues using both DSC and DMA. Tensile testing revealed the UPy-functionalized star polymers (UPy-Star) exhibited a higher Young's modulus and lower percent elongation at failure compared to the UPy-telechelic polymers with M n of 24 000 g/mol (UPy-24K-T) analogues. UPy-Star polymer exhibited a rubbery plateau region over a well-defined frequency range, and in contrast, the UPy-functionalized linear polymers were in the terminal flow regime, which suggested greater association for the star-shaped polymers. In addition, complex viscosity data revealed a non-Newtonian behavior for the star-shaped polymers in contrast to linear analogues, which is also consistent with a highly associated structure.",
author = "Elkins, {Casey L.} and Kalpana Viswanathan and Long, {Timothy Edward}",
year = "2006",
month = "5",
day = "2",
doi = "10.1021/ma052754+",
language = "English",
volume = "39",
pages = "3132--3139",
journal = "Macromolecules",
issn = "0024-9297",
publisher = "American Chemical Society",
number = "9",

}

TY - JOUR

T1 - Synthesis and characterization of star-shaped poly(ethylene-co-propylene) polymers bearing terminal self-complementary multiple hydrogen-bonding sites

AU - Elkins, Casey L.

AU - Viswanathan, Kalpana

AU - Long, Timothy Edward

PY - 2006/5/2

Y1 - 2006/5/2

N2 - The polymerization of isoprene was initiated with 3-(tert- butyldimethylsilyloxy)-1-propyllithium (TBDMSPrLi), which contained a silyl-protected hydroxyl functionality. Living poly(isoprenyllithium) with controlled molecular weight and narrow molecular weight distribution coupled efficiently with divinylbenzene to form well-defined star-shaped polymers. Both linear and star-shaped polymers were subsequently hydrogenated to poly(ethylene-co-propylene) and deprotected quantitatively to yield terminal primary hydroxyl functionality. High conversions of hydroxyl functionality to the 2-ureido-4[1H]-pyrimidinone (UPy) quadruple hydrogen-bonding group were achieved using isocyanate coupling and subsequent reaction with 6-methylisocytosine. Nonfunctionalized and UPy-functionalized linear and star-shaped poly(ethylene-co-propylene)s were characterized using 1H NMR spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), tensile testing, and melt rheology. The observed glass transition temperatures were independent of molecular architecture for the UPy-functionalized polymers and nonfunctionalized analogues using both DSC and DMA. Tensile testing revealed the UPy-functionalized star polymers (UPy-Star) exhibited a higher Young's modulus and lower percent elongation at failure compared to the UPy-telechelic polymers with M n of 24 000 g/mol (UPy-24K-T) analogues. UPy-Star polymer exhibited a rubbery plateau region over a well-defined frequency range, and in contrast, the UPy-functionalized linear polymers were in the terminal flow regime, which suggested greater association for the star-shaped polymers. In addition, complex viscosity data revealed a non-Newtonian behavior for the star-shaped polymers in contrast to linear analogues, which is also consistent with a highly associated structure.

AB - The polymerization of isoprene was initiated with 3-(tert- butyldimethylsilyloxy)-1-propyllithium (TBDMSPrLi), which contained a silyl-protected hydroxyl functionality. Living poly(isoprenyllithium) with controlled molecular weight and narrow molecular weight distribution coupled efficiently with divinylbenzene to form well-defined star-shaped polymers. Both linear and star-shaped polymers were subsequently hydrogenated to poly(ethylene-co-propylene) and deprotected quantitatively to yield terminal primary hydroxyl functionality. High conversions of hydroxyl functionality to the 2-ureido-4[1H]-pyrimidinone (UPy) quadruple hydrogen-bonding group were achieved using isocyanate coupling and subsequent reaction with 6-methylisocytosine. Nonfunctionalized and UPy-functionalized linear and star-shaped poly(ethylene-co-propylene)s were characterized using 1H NMR spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), tensile testing, and melt rheology. The observed glass transition temperatures were independent of molecular architecture for the UPy-functionalized polymers and nonfunctionalized analogues using both DSC and DMA. Tensile testing revealed the UPy-functionalized star polymers (UPy-Star) exhibited a higher Young's modulus and lower percent elongation at failure compared to the UPy-telechelic polymers with M n of 24 000 g/mol (UPy-24K-T) analogues. UPy-Star polymer exhibited a rubbery plateau region over a well-defined frequency range, and in contrast, the UPy-functionalized linear polymers were in the terminal flow regime, which suggested greater association for the star-shaped polymers. In addition, complex viscosity data revealed a non-Newtonian behavior for the star-shaped polymers in contrast to linear analogues, which is also consistent with a highly associated structure.

UR - http://www.scopus.com/inward/record.url?scp=33744470853&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33744470853&partnerID=8YFLogxK

U2 - 10.1021/ma052754+

DO - 10.1021/ma052754+

M3 - Article

AN - SCOPUS:33744470853

VL - 39

SP - 3132

EP - 3139

JO - Macromolecules

JF - Macromolecules

SN - 0024-9297

IS - 9

ER -