Synthesis of material flow analysis and input–output analysis

    Research output: Chapter in Book/Report/Conference proceedingChapter

    Abstract

    Introduction For a model of a production process to be valid in the real world, it has to take proper account of the principles of thermodynamics. Production models in economics are no exception. The conservation of mass requires that proper attention be paid to the mass balance between inputs and outputs entering and leaving a given production process. An increase of entropy implies the generation of process waste in the production phase and the reduction in the purity of materials in the use and end-of-life (EoL) phases. Because process waste is generated in the production phase, it should be classified as an output if the mass balance between inputs and outputs is to be established. The reduction in the purity of materials in the use phase is relevant for materials made of polymers, such as paper, textile, and plastics, whose chemical bindings loosen over time. On the other hand, for metals such as iron, copper, or aluminum, such a decline in quality in the use phase will not occur [except for possible corrosions (oxidization)] because these metals are elements. In fact, it is not the use phase but the EoL phase in which a serious reduction in the quality of metal materials can occur because of the mixing-up of diverse metal elements or the “contamination” of pure elements with other elements in minor quantities (tramp elements).

    Original languageEnglish
    Title of host publicationThermodynamics and the Destruction of Resources
    PublisherCambridge University Press
    Pages334-362
    Number of pages29
    ISBN (Print)9780511976049, 9780521884556
    DOIs
    Publication statusPublished - 2011 Jan 1

    ASJC Scopus subject areas

    • Engineering(all)

    Fingerprint Dive into the research topics of 'Synthesis of material flow analysis and input–output analysis'. Together they form a unique fingerprint.

  • Cite this

    Nakamura, S. (2011). Synthesis of material flow analysis and input–output analysis. In Thermodynamics and the Destruction of Resources (pp. 334-362). Cambridge University Press. https://doi.org/10.1017/CBO9780511976049.017