SYSTEM FOR SIMULATING THE MACHINING OPERATION BASED ON SOLID MODELS IN COMPUTER.

Hiroyuki Hiraoka; Peter Bertok; Shozo Takata; Toshio Sata

SYSTEM FOR SIMULATING THE MACHINING OPERATION BASED ON SOLID MODELS IN COMPUTER.

Hiroyuki Hiraoka^*, Peter Bertok, Shozo Takata, Toshio Sata

^*Corresponding author for this work

Research output: Contribution to journal › Article › peer-review

Abstract

A system for simulating the cutting process by use of a geometric modelling system, is described. The process is simulated geometrically in a modelling system. The cutting torque is estimated with an empirical equation, including the volume of the removed material and the tool-workpiece contact surface area obtained by the geometrical simulation. The system is useful for NC program verification and generation of reference data for monitoring system.

Original language	English
Pages (from-to)	22-23
Number of pages	2
Journal	Journal of the Faculty of Engineering, the University of Tokyo, Series A
Issue number	23
Publication status	Published - 1985
Externally published	Yes

ASJC Scopus subject areas

Engineering(all)

Cite this

@article{d63373a397744b9bbf9992e01c060b0a,

title = "SYSTEM FOR SIMULATING THE MACHINING OPERATION BASED ON SOLID MODELS IN COMPUTER.",

abstract = "A system for simulating the cutting process by use of a geometric modelling system, is described. The process is simulated geometrically in a modelling system. The cutting torque is estimated with an empirical equation, including the volume of the removed material and the tool-workpiece contact surface area obtained by the geometrical simulation. The system is useful for NC program verification and generation of reference data for monitoring system.",

author = "Hiroyuki Hiraoka and Peter Bertok and Shozo Takata and Toshio Sata",

year = "1985",

language = "English",

pages = "22--23",

journal = "Journal of the Faculty of Engineering, the University of Tokyo, Series A",

issn = "0563-7945",

number = "23",

}

TY - JOUR

T1 - SYSTEM FOR SIMULATING THE MACHINING OPERATION BASED ON SOLID MODELS IN COMPUTER.

AU - Hiraoka, Hiroyuki

AU - Bertok, Peter

AU - Takata, Shozo

AU - Sata, Toshio

PY - 1985

Y1 - 1985

N2 - A system for simulating the cutting process by use of a geometric modelling system, is described. The process is simulated geometrically in a modelling system. The cutting torque is estimated with an empirical equation, including the volume of the removed material and the tool-workpiece contact surface area obtained by the geometrical simulation. The system is useful for NC program verification and generation of reference data for monitoring system.

AB - A system for simulating the cutting process by use of a geometric modelling system, is described. The process is simulated geometrically in a modelling system. The cutting torque is estimated with an empirical equation, including the volume of the removed material and the tool-workpiece contact surface area obtained by the geometrical simulation. The system is useful for NC program verification and generation of reference data for monitoring system.

UR - http://www.scopus.com/inward/record.url?scp=0022313770&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022313770&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0022313770

SN - 0563-7945

SP - 22

EP - 23

JO - Journal of the Faculty of Engineering, the University of Tokyo, Series A

JF - Journal of the Faculty of Engineering, the University of Tokyo, Series A

IS - 23

ER -

SYSTEM FOR SIMULATING THE MACHINING OPERATION BASED ON SOLID MODELS IN COMPUTER.

Abstract

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this