Temperature compensation of pressure-sensitive luminescent polymer sensors

Sachiko Sano, Takahiro Yuuki, Tsuyoshi Hyakutake, Katsuaki Morita, Hirotaka Sakaue, Satoshi Arai, Hidetoshi Matsumoto, Tsuyoshi Michinobu

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

In this study, dual luminescent polymer sensors based on a pressure-sensitive palladium(II) tetraphenylporphyrin, PdTPP, and a temperature-sensitive europium(III) complex, EuDT, were newly fabricated by spray-coating or electrospinning of the solutions containing polystyrene as a matrix for the simultaneous detection of both pressure and temperature. The pressure and temperature responses were recorded as a function of the luminescence changes, and their sensitivities were carefully evaluated. The electrospun nanofibrous films exhibited a higher pressure-sensitivity than the corresponding spray-coated films, which was most likely attributed to their highly porous structures. In addition, accurate temperatures at the sample surface were determined from the luminescence intensities of the temperature-sensitive dye, which were used for the temperature correction of the surface pressure measurements. It was demonstrated that the accuracy of the pressure measurements based on the luminescence intensities of the pressure-sensitive dye was significantly improved after the temperature corrections. This is the first report of dual luminescent nanofibrous polymer sensors.

Original languageEnglish
Pages (from-to)1960-1966
Number of pages7
JournalSensors and Actuators, B: Chemical
Volume255
DOIs
Publication statusPublished - 2018 Feb 1

Fingerprint

temperature compensation
Polymers
sensors
Sensors
polymers
Luminescence
Temperature
luminescence
pressure measurement
temperature
Pressure measurement
sprayers
Coloring Agents
Dyes
dyes
Europium
sensitivity
Surface measurement
Polystyrenes
Electrospinning

Keywords

  • Electrospinning
  • Oxygen sensor
  • Pressure-sensitive paint
  • Temperature sensor

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Instrumentation
  • Condensed Matter Physics
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Electrical and Electronic Engineering
  • Materials Chemistry

Cite this

Sano, S., Yuuki, T., Hyakutake, T., Morita, K., Sakaue, H., Arai, S., ... Michinobu, T. (2018). Temperature compensation of pressure-sensitive luminescent polymer sensors. Sensors and Actuators, B: Chemical, 255, 1960-1966. https://doi.org/10.1016/j.snb.2017.08.221

Temperature compensation of pressure-sensitive luminescent polymer sensors. / Sano, Sachiko; Yuuki, Takahiro; Hyakutake, Tsuyoshi; Morita, Katsuaki; Sakaue, Hirotaka; Arai, Satoshi; Matsumoto, Hidetoshi; Michinobu, Tsuyoshi.

In: Sensors and Actuators, B: Chemical, Vol. 255, 01.02.2018, p. 1960-1966.

Research output: Contribution to journalArticle

Sano, S, Yuuki, T, Hyakutake, T, Morita, K, Sakaue, H, Arai, S, Matsumoto, H & Michinobu, T 2018, 'Temperature compensation of pressure-sensitive luminescent polymer sensors', Sensors and Actuators, B: Chemical, vol. 255, pp. 1960-1966. https://doi.org/10.1016/j.snb.2017.08.221
Sano, Sachiko ; Yuuki, Takahiro ; Hyakutake, Tsuyoshi ; Morita, Katsuaki ; Sakaue, Hirotaka ; Arai, Satoshi ; Matsumoto, Hidetoshi ; Michinobu, Tsuyoshi. / Temperature compensation of pressure-sensitive luminescent polymer sensors. In: Sensors and Actuators, B: Chemical. 2018 ; Vol. 255. pp. 1960-1966.
@article{c4af7c5fc532470087c374ed09e57581,
title = "Temperature compensation of pressure-sensitive luminescent polymer sensors",
abstract = "In this study, dual luminescent polymer sensors based on a pressure-sensitive palladium(II) tetraphenylporphyrin, PdTPP, and a temperature-sensitive europium(III) complex, EuDT, were newly fabricated by spray-coating or electrospinning of the solutions containing polystyrene as a matrix for the simultaneous detection of both pressure and temperature. The pressure and temperature responses were recorded as a function of the luminescence changes, and their sensitivities were carefully evaluated. The electrospun nanofibrous films exhibited a higher pressure-sensitivity than the corresponding spray-coated films, which was most likely attributed to their highly porous structures. In addition, accurate temperatures at the sample surface were determined from the luminescence intensities of the temperature-sensitive dye, which were used for the temperature correction of the surface pressure measurements. It was demonstrated that the accuracy of the pressure measurements based on the luminescence intensities of the pressure-sensitive dye was significantly improved after the temperature corrections. This is the first report of dual luminescent nanofibrous polymer sensors.",
keywords = "Electrospinning, Oxygen sensor, Pressure-sensitive paint, Temperature sensor",
author = "Sachiko Sano and Takahiro Yuuki and Tsuyoshi Hyakutake and Katsuaki Morita and Hirotaka Sakaue and Satoshi Arai and Hidetoshi Matsumoto and Tsuyoshi Michinobu",
year = "2018",
month = "2",
day = "1",
doi = "10.1016/j.snb.2017.08.221",
language = "English",
volume = "255",
pages = "1960--1966",
journal = "Sensors and Actuators, B: Chemical",
issn = "0925-4005",
publisher = "Elsevier",

}

TY - JOUR

T1 - Temperature compensation of pressure-sensitive luminescent polymer sensors

AU - Sano, Sachiko

AU - Yuuki, Takahiro

AU - Hyakutake, Tsuyoshi

AU - Morita, Katsuaki

AU - Sakaue, Hirotaka

AU - Arai, Satoshi

AU - Matsumoto, Hidetoshi

AU - Michinobu, Tsuyoshi

PY - 2018/2/1

Y1 - 2018/2/1

N2 - In this study, dual luminescent polymer sensors based on a pressure-sensitive palladium(II) tetraphenylporphyrin, PdTPP, and a temperature-sensitive europium(III) complex, EuDT, were newly fabricated by spray-coating or electrospinning of the solutions containing polystyrene as a matrix for the simultaneous detection of both pressure and temperature. The pressure and temperature responses were recorded as a function of the luminescence changes, and their sensitivities were carefully evaluated. The electrospun nanofibrous films exhibited a higher pressure-sensitivity than the corresponding spray-coated films, which was most likely attributed to their highly porous structures. In addition, accurate temperatures at the sample surface were determined from the luminescence intensities of the temperature-sensitive dye, which were used for the temperature correction of the surface pressure measurements. It was demonstrated that the accuracy of the pressure measurements based on the luminescence intensities of the pressure-sensitive dye was significantly improved after the temperature corrections. This is the first report of dual luminescent nanofibrous polymer sensors.

AB - In this study, dual luminescent polymer sensors based on a pressure-sensitive palladium(II) tetraphenylporphyrin, PdTPP, and a temperature-sensitive europium(III) complex, EuDT, were newly fabricated by spray-coating or electrospinning of the solutions containing polystyrene as a matrix for the simultaneous detection of both pressure and temperature. The pressure and temperature responses were recorded as a function of the luminescence changes, and their sensitivities were carefully evaluated. The electrospun nanofibrous films exhibited a higher pressure-sensitivity than the corresponding spray-coated films, which was most likely attributed to their highly porous structures. In addition, accurate temperatures at the sample surface were determined from the luminescence intensities of the temperature-sensitive dye, which were used for the temperature correction of the surface pressure measurements. It was demonstrated that the accuracy of the pressure measurements based on the luminescence intensities of the pressure-sensitive dye was significantly improved after the temperature corrections. This is the first report of dual luminescent nanofibrous polymer sensors.

KW - Electrospinning

KW - Oxygen sensor

KW - Pressure-sensitive paint

KW - Temperature sensor

UR - http://www.scopus.com/inward/record.url?scp=85028994874&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85028994874&partnerID=8YFLogxK

U2 - 10.1016/j.snb.2017.08.221

DO - 10.1016/j.snb.2017.08.221

M3 - Article

VL - 255

SP - 1960

EP - 1966

JO - Sensors and Actuators, B: Chemical

JF - Sensors and Actuators, B: Chemical

SN - 0925-4005

ER -