The electrochemistry of nickel in a lithium-based solid polymer electrolyte in ultrahigh vacuum environments

Lin Feng Li, Dana Totir, Yosef Gofer, Gary S. Chottiner, Daniel Alberto Scherson*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

21 Citations (Scopus)


The underpotential deposition (UPD) of lithium on polycrystalline Ni and Ni(111) from LiClO4/poly(ethylene)-oxide (PEO) and Lil/PEO electrolytes was examined by cyclic voltammetry in ultrahigh vacuum (UHV) at temperatures, T, in the range 330-340 K. At least two well-defined UPD peaks (A and B), and their corresponding stripping counterparts (A′ and B′), were identified in the region 0.25-2.0 V vs. Li[C/R]. Their combined charge, QA + B (or QA′ + B′), estimated from the smoother Ni(111) specimen, was about 40 μC/cm2, i.e. equivalent to a Li coverage (θLi) of ca. 0.15, assuming Li+ undergoes full discharge. The presence of more than a single Li UPD voltammetric feature is consistent with low energy electron diffraction (LEED) studies of K, Cs and Li adsorbed on Ni(111), which revealed different surface superstructures as a function of the alkali metal coverage (θalk) for 300 < T < 350 K. Furthermore, the small values of θLi found just prior to bulk Li electrodeposition, are in harmony with (i) additional LEED information, which indicates that a second alkali metal layer begins to form for θalk≤0.5 and (ii) the rapid decrease in the work function of Ni, ΦNi (and other high work function metals) as a function of θalk to values lower than Φalk for θalk <0.3. Electrodeposition of bulk Li on Ni displayed a nucleation/ growth loop and a sharp stripping peak with no evidence for alloy formation. Marked changes in the voltammetric features could be observed after dosing polycrystalline Ni surfaces with carbon, and especially oxygen, supporting the view that peaks A and B (and A′ and B′) can indeed be ascribed to Li UPD (and stripping) and not to effects associated with superficial impurities.

Original languageEnglish
Pages (from-to)949-955
Number of pages7
JournalElectrochimica Acta
Issue number6-7
Publication statusPublished - 1998 Nov 1
Externally publishedYes


  • LEED
  • Lithium
  • Nickel
  • Solid polymer electrolyte
  • UHV
  • UPD

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Electrochemistry


Dive into the research topics of 'The electrochemistry of nickel in a lithium-based solid polymer electrolyte in ultrahigh vacuum environments'. Together they form a unique fingerprint.

Cite this