The flow structure in an anatomically realistic cerebral aneurysm model with small aspect ratio

Taku Morino, Hikoichiro Takahashi, Takatsugu Yamauchi, Kazuo Tanishita, Yuichi Murayama, Satoshi Tateshima, Fernando Vinuela

Research output: Chapter in Book/Report/Conference proceedingChapter

Abstract

We measured the velocity profiles in an anatomically realistic model of a basilar tip aneurysm with small aspect ratio (depth / neck width) by LDV. We built an aneurysm model based on CT images. The maximum Reynolds number based on the diameter of basilar artery was 795 and the frequency parameter was 5.0. The inflow went into the aneurysm dome along the posterior wall. At the bleb, the flow separated from the wall and was decelerated. The outflow region was widely extended at the anterior side of the aneurysm with low velocity, because the dome shape developed asymmetrically to the anterior side. The shear stress at the bleb was intensified at the beginning of the deceleration phase, although the wall shear stress at intra-aneurysm points didn't change drastically. We found out that aneurysms with small aspect ratio contains the peaked hemodynamic stress by using the realistic model. Therefore the diagnosis of aneurysm should be assessed by a realistic model.

Original languageEnglish
Title of host publicationAmerican Society of Mechanical Engineers, Bioengineering Division (Publication) BED
Pages273-274
Number of pages2
Volume48
Publication statusPublished - 2000
Externally publishedYes

Fingerprint

Flow structure
Aspect ratio
Domes
Shear stress
Deceleration
Hemodynamics
Reynolds number

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Morino, T., Takahashi, H., Yamauchi, T., Tanishita, K., Murayama, Y., Tateshima, S., & Vinuela, F. (2000). The flow structure in an anatomically realistic cerebral aneurysm model with small aspect ratio. In American Society of Mechanical Engineers, Bioengineering Division (Publication) BED (Vol. 48, pp. 273-274)

The flow structure in an anatomically realistic cerebral aneurysm model with small aspect ratio. / Morino, Taku; Takahashi, Hikoichiro; Yamauchi, Takatsugu; Tanishita, Kazuo; Murayama, Yuichi; Tateshima, Satoshi; Vinuela, Fernando.

American Society of Mechanical Engineers, Bioengineering Division (Publication) BED. Vol. 48 2000. p. 273-274.

Research output: Chapter in Book/Report/Conference proceedingChapter

Morino, T, Takahashi, H, Yamauchi, T, Tanishita, K, Murayama, Y, Tateshima, S & Vinuela, F 2000, The flow structure in an anatomically realistic cerebral aneurysm model with small aspect ratio. in American Society of Mechanical Engineers, Bioengineering Division (Publication) BED. vol. 48, pp. 273-274.
Morino T, Takahashi H, Yamauchi T, Tanishita K, Murayama Y, Tateshima S et al. The flow structure in an anatomically realistic cerebral aneurysm model with small aspect ratio. In American Society of Mechanical Engineers, Bioengineering Division (Publication) BED. Vol. 48. 2000. p. 273-274
Morino, Taku ; Takahashi, Hikoichiro ; Yamauchi, Takatsugu ; Tanishita, Kazuo ; Murayama, Yuichi ; Tateshima, Satoshi ; Vinuela, Fernando. / The flow structure in an anatomically realistic cerebral aneurysm model with small aspect ratio. American Society of Mechanical Engineers, Bioengineering Division (Publication) BED. Vol. 48 2000. pp. 273-274
@inbook{2621c314c37643ccb8c63a2094a95485,
title = "The flow structure in an anatomically realistic cerebral aneurysm model with small aspect ratio",
abstract = "We measured the velocity profiles in an anatomically realistic model of a basilar tip aneurysm with small aspect ratio (depth / neck width) by LDV. We built an aneurysm model based on CT images. The maximum Reynolds number based on the diameter of basilar artery was 795 and the frequency parameter was 5.0. The inflow went into the aneurysm dome along the posterior wall. At the bleb, the flow separated from the wall and was decelerated. The outflow region was widely extended at the anterior side of the aneurysm with low velocity, because the dome shape developed asymmetrically to the anterior side. The shear stress at the bleb was intensified at the beginning of the deceleration phase, although the wall shear stress at intra-aneurysm points didn't change drastically. We found out that aneurysms with small aspect ratio contains the peaked hemodynamic stress by using the realistic model. Therefore the diagnosis of aneurysm should be assessed by a realistic model.",
author = "Taku Morino and Hikoichiro Takahashi and Takatsugu Yamauchi and Kazuo Tanishita and Yuichi Murayama and Satoshi Tateshima and Fernando Vinuela",
year = "2000",
language = "English",
volume = "48",
pages = "273--274",
booktitle = "American Society of Mechanical Engineers, Bioengineering Division (Publication) BED",

}

TY - CHAP

T1 - The flow structure in an anatomically realistic cerebral aneurysm model with small aspect ratio

AU - Morino, Taku

AU - Takahashi, Hikoichiro

AU - Yamauchi, Takatsugu

AU - Tanishita, Kazuo

AU - Murayama, Yuichi

AU - Tateshima, Satoshi

AU - Vinuela, Fernando

PY - 2000

Y1 - 2000

N2 - We measured the velocity profiles in an anatomically realistic model of a basilar tip aneurysm with small aspect ratio (depth / neck width) by LDV. We built an aneurysm model based on CT images. The maximum Reynolds number based on the diameter of basilar artery was 795 and the frequency parameter was 5.0. The inflow went into the aneurysm dome along the posterior wall. At the bleb, the flow separated from the wall and was decelerated. The outflow region was widely extended at the anterior side of the aneurysm with low velocity, because the dome shape developed asymmetrically to the anterior side. The shear stress at the bleb was intensified at the beginning of the deceleration phase, although the wall shear stress at intra-aneurysm points didn't change drastically. We found out that aneurysms with small aspect ratio contains the peaked hemodynamic stress by using the realistic model. Therefore the diagnosis of aneurysm should be assessed by a realistic model.

AB - We measured the velocity profiles in an anatomically realistic model of a basilar tip aneurysm with small aspect ratio (depth / neck width) by LDV. We built an aneurysm model based on CT images. The maximum Reynolds number based on the diameter of basilar artery was 795 and the frequency parameter was 5.0. The inflow went into the aneurysm dome along the posterior wall. At the bleb, the flow separated from the wall and was decelerated. The outflow region was widely extended at the anterior side of the aneurysm with low velocity, because the dome shape developed asymmetrically to the anterior side. The shear stress at the bleb was intensified at the beginning of the deceleration phase, although the wall shear stress at intra-aneurysm points didn't change drastically. We found out that aneurysms with small aspect ratio contains the peaked hemodynamic stress by using the realistic model. Therefore the diagnosis of aneurysm should be assessed by a realistic model.

UR - http://www.scopus.com/inward/record.url?scp=14044270187&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=14044270187&partnerID=8YFLogxK

M3 - Chapter

AN - SCOPUS:14044270187

VL - 48

SP - 273

EP - 274

BT - American Society of Mechanical Engineers, Bioengineering Division (Publication) BED

ER -