Thin polymeric films for building biohybrid microrobots

Leonardo Ricotti, Toshinori Fujie

Research output: Contribution to journalReview article

6 Citations (Scopus)

Abstract

This paper aims to describe the disruptive potential that polymeric thin films have in the field of biohybrid devices and to review the recent efforts in this area. Thin (thickness < 1 mm) and ultra-thin (thickness < 1 μm) matrices possess a series of intriguing features, such as large surface area/volume ratio, high flexibility, chemical and physical surface tailorability, etc. This enables the fabrication of advanced bio/non-bio interfaces able to efficiently drive cell-material interactions, which are the key for optimizing biohybrid device performances. Thin films can thus represent suitable platforms on which living and artificial elements are coupled, with the aim of exploiting the unique features of living cells/tissues. This may allow to carry out certain tasks, not achievable with fully artificial technologies. In the paper, after a description of the desirable chemical/physical cues to be targeted and of the fabrication, functionalization and characterization procedures to be used for thin and ultra-thin films, the state-of-the-art of biohybrid microrobots based on micro/nano-membranes are described and discussed. The research efforts in this field are rather recent and they focus on: (1) self-beating cells (such as cardiomyocytes) able to induce a relatively large deformation of the underlying substrates, but affected by a limited controllability by external users; (2) skeletal muscle cells, more difficult to engineer in mature and functional contractile tissues, but featured by a higher controllability. In this context, the different materials used and the performances achieved are analyzed. Despite recent interesting advancements and signs of maturity of this research field, important scientific and technological steps are still needed. In the paper some possible future perspectives are described, mainly concerning thin film manipulation and assembly in multilayer 3D systems, new advanced materials to be used for the fabrication of thin films, cell engineering opportunities and modelling/computational efforts.

Original languageEnglish
Article number021001
JournalBioinspiration and Biomimetics
Volume12
Issue number2
DOIs
Publication statusPublished - 2017 Mar 6

Fingerprint

Polymer films
Cell Engineering
Thin films
Equipment and Supplies
Controllability
Research
Cardiac Myocytes
Fabrication
Cell Communication
Muscle Cells
Cues
Skeletal Muscle
Cell engineering
Cells
Tissue
Technology
Membranes
Ultrathin films
Muscle
Multilayers

Keywords

  • bioactuators
  • biohybrid actuators
  • cell-based devices
  • microrobots
  • polymeric thin films
  • soft robotics
  • ultra-thin films

ASJC Scopus subject areas

  • Biotechnology
  • Biophysics
  • Biochemistry
  • Molecular Medicine
  • Engineering (miscellaneous)

Cite this

Thin polymeric films for building biohybrid microrobots. / Ricotti, Leonardo; Fujie, Toshinori.

In: Bioinspiration and Biomimetics, Vol. 12, No. 2, 021001, 06.03.2017.

Research output: Contribution to journalReview article

Ricotti, Leonardo ; Fujie, Toshinori. / Thin polymeric films for building biohybrid microrobots. In: Bioinspiration and Biomimetics. 2017 ; Vol. 12, No. 2.
@article{27956f377d034aaab932515d050910b5,
title = "Thin polymeric films for building biohybrid microrobots",
abstract = "This paper aims to describe the disruptive potential that polymeric thin films have in the field of biohybrid devices and to review the recent efforts in this area. Thin (thickness < 1 mm) and ultra-thin (thickness < 1 μm) matrices possess a series of intriguing features, such as large surface area/volume ratio, high flexibility, chemical and physical surface tailorability, etc. This enables the fabrication of advanced bio/non-bio interfaces able to efficiently drive cell-material interactions, which are the key for optimizing biohybrid device performances. Thin films can thus represent suitable platforms on which living and artificial elements are coupled, with the aim of exploiting the unique features of living cells/tissues. This may allow to carry out certain tasks, not achievable with fully artificial technologies. In the paper, after a description of the desirable chemical/physical cues to be targeted and of the fabrication, functionalization and characterization procedures to be used for thin and ultra-thin films, the state-of-the-art of biohybrid microrobots based on micro/nano-membranes are described and discussed. The research efforts in this field are rather recent and they focus on: (1) self-beating cells (such as cardiomyocytes) able to induce a relatively large deformation of the underlying substrates, but affected by a limited controllability by external users; (2) skeletal muscle cells, more difficult to engineer in mature and functional contractile tissues, but featured by a higher controllability. In this context, the different materials used and the performances achieved are analyzed. Despite recent interesting advancements and signs of maturity of this research field, important scientific and technological steps are still needed. In the paper some possible future perspectives are described, mainly concerning thin film manipulation and assembly in multilayer 3D systems, new advanced materials to be used for the fabrication of thin films, cell engineering opportunities and modelling/computational efforts.",
keywords = "bioactuators, biohybrid actuators, cell-based devices, microrobots, polymeric thin films, soft robotics, ultra-thin films",
author = "Leonardo Ricotti and Toshinori Fujie",
year = "2017",
month = "3",
day = "6",
doi = "10.1088/1748-3190/aa5e5f",
language = "English",
volume = "12",
journal = "Bioinspiration and Biomimetics",
issn = "1748-3182",
publisher = "IOP Publishing Ltd.",
number = "2",

}

TY - JOUR

T1 - Thin polymeric films for building biohybrid microrobots

AU - Ricotti, Leonardo

AU - Fujie, Toshinori

PY - 2017/3/6

Y1 - 2017/3/6

N2 - This paper aims to describe the disruptive potential that polymeric thin films have in the field of biohybrid devices and to review the recent efforts in this area. Thin (thickness < 1 mm) and ultra-thin (thickness < 1 μm) matrices possess a series of intriguing features, such as large surface area/volume ratio, high flexibility, chemical and physical surface tailorability, etc. This enables the fabrication of advanced bio/non-bio interfaces able to efficiently drive cell-material interactions, which are the key for optimizing biohybrid device performances. Thin films can thus represent suitable platforms on which living and artificial elements are coupled, with the aim of exploiting the unique features of living cells/tissues. This may allow to carry out certain tasks, not achievable with fully artificial technologies. In the paper, after a description of the desirable chemical/physical cues to be targeted and of the fabrication, functionalization and characterization procedures to be used for thin and ultra-thin films, the state-of-the-art of biohybrid microrobots based on micro/nano-membranes are described and discussed. The research efforts in this field are rather recent and they focus on: (1) self-beating cells (such as cardiomyocytes) able to induce a relatively large deformation of the underlying substrates, but affected by a limited controllability by external users; (2) skeletal muscle cells, more difficult to engineer in mature and functional contractile tissues, but featured by a higher controllability. In this context, the different materials used and the performances achieved are analyzed. Despite recent interesting advancements and signs of maturity of this research field, important scientific and technological steps are still needed. In the paper some possible future perspectives are described, mainly concerning thin film manipulation and assembly in multilayer 3D systems, new advanced materials to be used for the fabrication of thin films, cell engineering opportunities and modelling/computational efforts.

AB - This paper aims to describe the disruptive potential that polymeric thin films have in the field of biohybrid devices and to review the recent efforts in this area. Thin (thickness < 1 mm) and ultra-thin (thickness < 1 μm) matrices possess a series of intriguing features, such as large surface area/volume ratio, high flexibility, chemical and physical surface tailorability, etc. This enables the fabrication of advanced bio/non-bio interfaces able to efficiently drive cell-material interactions, which are the key for optimizing biohybrid device performances. Thin films can thus represent suitable platforms on which living and artificial elements are coupled, with the aim of exploiting the unique features of living cells/tissues. This may allow to carry out certain tasks, not achievable with fully artificial technologies. In the paper, after a description of the desirable chemical/physical cues to be targeted and of the fabrication, functionalization and characterization procedures to be used for thin and ultra-thin films, the state-of-the-art of biohybrid microrobots based on micro/nano-membranes are described and discussed. The research efforts in this field are rather recent and they focus on: (1) self-beating cells (such as cardiomyocytes) able to induce a relatively large deformation of the underlying substrates, but affected by a limited controllability by external users; (2) skeletal muscle cells, more difficult to engineer in mature and functional contractile tissues, but featured by a higher controllability. In this context, the different materials used and the performances achieved are analyzed. Despite recent interesting advancements and signs of maturity of this research field, important scientific and technological steps are still needed. In the paper some possible future perspectives are described, mainly concerning thin film manipulation and assembly in multilayer 3D systems, new advanced materials to be used for the fabrication of thin films, cell engineering opportunities and modelling/computational efforts.

KW - bioactuators

KW - biohybrid actuators

KW - cell-based devices

KW - microrobots

KW - polymeric thin films

KW - soft robotics

KW - ultra-thin films

UR - http://www.scopus.com/inward/record.url?scp=85017117295&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85017117295&partnerID=8YFLogxK

U2 - 10.1088/1748-3190/aa5e5f

DO - 10.1088/1748-3190/aa5e5f

M3 - Review article

VL - 12

JO - Bioinspiration and Biomimetics

JF - Bioinspiration and Biomimetics

SN - 1748-3182

IS - 2

M1 - 021001

ER -