Tool breakage detection by the measurement of spindle rotational speed fluctuation

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, a method for detecting breakage of multi-edge tools is studied by means of the fluctuation of the spindle rotational speed. The fluctuation of the spindle speed can be easily obtained via a tachometer generator or a pulse generator without any additional measurement equipment. It corresponds to the cutting torque fluctuation during intermittent cutting operations, and reflects the effect of tool breakage, which induces a change in the pattern of the cutting torque fluctuation. Three monitoring parameters are derived from the spindle speed measurement. These parameters indicate changes in the pattern of the fluctuation with a broken tool. In monitoring experiments, these parameters showed clear changes upon tool breakage, and were proven to be an effective means for monitoring tool breakage.

Original languageEnglish
Title of host publicationAmerican Society of Mechanical Engineers, Production Engineering Division (Publication) PED
Place of PublicationNew York, NY, United States
PublisherPubl by American Soc of Mechanical Engineers (ASME)
Pages129-135
Number of pages7
Volume33
Publication statusPublished - 1988
Externally publishedYes
EventSensors and Controls for Manufacturing - 1988 - Chicago, MI, USA
Duration: 1988 Nov 271988 Dec 2

Other

OtherSensors and Controls for Manufacturing - 1988
CityChicago, MI, USA
Period88/11/2788/12/2

Fingerprint

Monitoring
Torque
Tachometers
Pulse generators
Experiments

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Cite this

Takata, S. (1988). Tool breakage detection by the measurement of spindle rotational speed fluctuation. In American Society of Mechanical Engineers, Production Engineering Division (Publication) PED (Vol. 33, pp. 129-135). New York, NY, United States: Publ by American Soc of Mechanical Engineers (ASME).

Tool breakage detection by the measurement of spindle rotational speed fluctuation. / Takata, Shozo.

American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. Vol. 33 New York, NY, United States : Publ by American Soc of Mechanical Engineers (ASME), 1988. p. 129-135.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Takata, S 1988, Tool breakage detection by the measurement of spindle rotational speed fluctuation. in American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. vol. 33, Publ by American Soc of Mechanical Engineers (ASME), New York, NY, United States, pp. 129-135, Sensors and Controls for Manufacturing - 1988, Chicago, MI, USA, 88/11/27.
Takata S. Tool breakage detection by the measurement of spindle rotational speed fluctuation. In American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. Vol. 33. New York, NY, United States: Publ by American Soc of Mechanical Engineers (ASME). 1988. p. 129-135
Takata, Shozo. / Tool breakage detection by the measurement of spindle rotational speed fluctuation. American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. Vol. 33 New York, NY, United States : Publ by American Soc of Mechanical Engineers (ASME), 1988. pp. 129-135
@inproceedings{c2d030060e0f44d8a9c2652c252eb13c,
title = "Tool breakage detection by the measurement of spindle rotational speed fluctuation",
abstract = "In this paper, a method for detecting breakage of multi-edge tools is studied by means of the fluctuation of the spindle rotational speed. The fluctuation of the spindle speed can be easily obtained via a tachometer generator or a pulse generator without any additional measurement equipment. It corresponds to the cutting torque fluctuation during intermittent cutting operations, and reflects the effect of tool breakage, which induces a change in the pattern of the cutting torque fluctuation. Three monitoring parameters are derived from the spindle speed measurement. These parameters indicate changes in the pattern of the fluctuation with a broken tool. In monitoring experiments, these parameters showed clear changes upon tool breakage, and were proven to be an effective means for monitoring tool breakage.",
author = "Shozo Takata",
year = "1988",
language = "English",
volume = "33",
pages = "129--135",
booktitle = "American Society of Mechanical Engineers, Production Engineering Division (Publication) PED",
publisher = "Publ by American Soc of Mechanical Engineers (ASME)",

}

TY - GEN

T1 - Tool breakage detection by the measurement of spindle rotational speed fluctuation

AU - Takata, Shozo

PY - 1988

Y1 - 1988

N2 - In this paper, a method for detecting breakage of multi-edge tools is studied by means of the fluctuation of the spindle rotational speed. The fluctuation of the spindle speed can be easily obtained via a tachometer generator or a pulse generator without any additional measurement equipment. It corresponds to the cutting torque fluctuation during intermittent cutting operations, and reflects the effect of tool breakage, which induces a change in the pattern of the cutting torque fluctuation. Three monitoring parameters are derived from the spindle speed measurement. These parameters indicate changes in the pattern of the fluctuation with a broken tool. In monitoring experiments, these parameters showed clear changes upon tool breakage, and were proven to be an effective means for monitoring tool breakage.

AB - In this paper, a method for detecting breakage of multi-edge tools is studied by means of the fluctuation of the spindle rotational speed. The fluctuation of the spindle speed can be easily obtained via a tachometer generator or a pulse generator without any additional measurement equipment. It corresponds to the cutting torque fluctuation during intermittent cutting operations, and reflects the effect of tool breakage, which induces a change in the pattern of the cutting torque fluctuation. Three monitoring parameters are derived from the spindle speed measurement. These parameters indicate changes in the pattern of the fluctuation with a broken tool. In monitoring experiments, these parameters showed clear changes upon tool breakage, and were proven to be an effective means for monitoring tool breakage.

UR - http://www.scopus.com/inward/record.url?scp=0024172986&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024172986&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0024172986

VL - 33

SP - 129

EP - 135

BT - American Society of Mechanical Engineers, Production Engineering Division (Publication) PED

PB - Publ by American Soc of Mechanical Engineers (ASME)

CY - New York, NY, United States

ER -