Transient stability preventive control for stable operating condition with desired CCT

Yoshinori Kato, Shinichi Iwamoto

    Research output: Contribution to journalArticle

    36 Citations (Scopus)

    Abstract

    In recent years, power systems have become larger and more complicated. Deregulation of electric power industries has begun in some countries, and power system operations have become more difficult. However, the stability of the power supply is the most important consideration for customers. Therefore, power system operators should consider not only economic load dispatch but also on-line stability aspects. In this paper, we pay attention to one of the most important transient stability indices [critical clearing time (CCT)] and propose a new transient stability preventive control method using linear relationships between CCTs and generator rotor angles. At first, CCT calculations, as contingency screenings, are carried out to find contingencies that have smaller CCTs than predefined target values. The target values are taken as larger values than the actual circuit breaker operating times in the power system. A preventive control to achieve a more stable power system operating point is carried out by generator output rescheduling and generator terminal voltage control, which are determined using the relationships between CCTs and generator rotor angles. This proposed method is demonstrated using a Japanese standard power system called the IEE of Japan (IEEJ) EAST 10 machine system.

    Original languageEnglish
    Pages (from-to)1154-1161
    Number of pages8
    JournalIEEE Transactions on Power Systems
    Volume17
    Issue number4
    DOIs
    Publication statusPublished - 2002 Nov

    Fingerprint

    Rotors
    Deregulation
    Electric circuit breakers
    Voltage control
    Screening
    Economics
    Industry

    Keywords

    • Critical clearing time
    • Generator rotor angle
    • Power system
    • Preventive control
    • Transient stability

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering

    Cite this

    Transient stability preventive control for stable operating condition with desired CCT. / Kato, Yoshinori; Iwamoto, Shinichi.

    In: IEEE Transactions on Power Systems, Vol. 17, No. 4, 11.2002, p. 1154-1161.

    Research output: Contribution to journalArticle

    Kato, Yoshinori ; Iwamoto, Shinichi. / Transient stability preventive control for stable operating condition with desired CCT. In: IEEE Transactions on Power Systems. 2002 ; Vol. 17, No. 4. pp. 1154-1161.
    @article{7a68e887fd8a4016a81cc47dfc6a49b1,
    title = "Transient stability preventive control for stable operating condition with desired CCT",
    abstract = "In recent years, power systems have become larger and more complicated. Deregulation of electric power industries has begun in some countries, and power system operations have become more difficult. However, the stability of the power supply is the most important consideration for customers. Therefore, power system operators should consider not only economic load dispatch but also on-line stability aspects. In this paper, we pay attention to one of the most important transient stability indices [critical clearing time (CCT)] and propose a new transient stability preventive control method using linear relationships between CCTs and generator rotor angles. At first, CCT calculations, as contingency screenings, are carried out to find contingencies that have smaller CCTs than predefined target values. The target values are taken as larger values than the actual circuit breaker operating times in the power system. A preventive control to achieve a more stable power system operating point is carried out by generator output rescheduling and generator terminal voltage control, which are determined using the relationships between CCTs and generator rotor angles. This proposed method is demonstrated using a Japanese standard power system called the IEE of Japan (IEEJ) EAST 10 machine system.",
    keywords = "Critical clearing time, Generator rotor angle, Power system, Preventive control, Transient stability",
    author = "Yoshinori Kato and Shinichi Iwamoto",
    year = "2002",
    month = "11",
    doi = "10.1109/TPWRS.2002.805019",
    language = "English",
    volume = "17",
    pages = "1154--1161",
    journal = "IEEE Transactions on Power Systems",
    issn = "0885-8950",
    publisher = "Institute of Electrical and Electronics Engineers Inc.",
    number = "4",

    }

    TY - JOUR

    T1 - Transient stability preventive control for stable operating condition with desired CCT

    AU - Kato, Yoshinori

    AU - Iwamoto, Shinichi

    PY - 2002/11

    Y1 - 2002/11

    N2 - In recent years, power systems have become larger and more complicated. Deregulation of electric power industries has begun in some countries, and power system operations have become more difficult. However, the stability of the power supply is the most important consideration for customers. Therefore, power system operators should consider not only economic load dispatch but also on-line stability aspects. In this paper, we pay attention to one of the most important transient stability indices [critical clearing time (CCT)] and propose a new transient stability preventive control method using linear relationships between CCTs and generator rotor angles. At first, CCT calculations, as contingency screenings, are carried out to find contingencies that have smaller CCTs than predefined target values. The target values are taken as larger values than the actual circuit breaker operating times in the power system. A preventive control to achieve a more stable power system operating point is carried out by generator output rescheduling and generator terminal voltage control, which are determined using the relationships between CCTs and generator rotor angles. This proposed method is demonstrated using a Japanese standard power system called the IEE of Japan (IEEJ) EAST 10 machine system.

    AB - In recent years, power systems have become larger and more complicated. Deregulation of electric power industries has begun in some countries, and power system operations have become more difficult. However, the stability of the power supply is the most important consideration for customers. Therefore, power system operators should consider not only economic load dispatch but also on-line stability aspects. In this paper, we pay attention to one of the most important transient stability indices [critical clearing time (CCT)] and propose a new transient stability preventive control method using linear relationships between CCTs and generator rotor angles. At first, CCT calculations, as contingency screenings, are carried out to find contingencies that have smaller CCTs than predefined target values. The target values are taken as larger values than the actual circuit breaker operating times in the power system. A preventive control to achieve a more stable power system operating point is carried out by generator output rescheduling and generator terminal voltage control, which are determined using the relationships between CCTs and generator rotor angles. This proposed method is demonstrated using a Japanese standard power system called the IEE of Japan (IEEJ) EAST 10 machine system.

    KW - Critical clearing time

    KW - Generator rotor angle

    KW - Power system

    KW - Preventive control

    KW - Transient stability

    UR - http://www.scopus.com/inward/record.url?scp=0036873303&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=0036873303&partnerID=8YFLogxK

    U2 - 10.1109/TPWRS.2002.805019

    DO - 10.1109/TPWRS.2002.805019

    M3 - Article

    VL - 17

    SP - 1154

    EP - 1161

    JO - IEEE Transactions on Power Systems

    JF - IEEE Transactions on Power Systems

    SN - 0885-8950

    IS - 4

    ER -