Tribological behaviour of stainless steel with respect to that of DLC in terms of energetic aspects

S. Yamamoto, A. Kawana, C. Masuda

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

The tribological behaviour of stainless steel (SUS 440C) relative to that of diamond-like carbon (DLC) was investigated in terms of tribometer input energy. The DLC was prepared on tungsten carbide (WC) substrates using radio frequency plasma chemical vapour deposition with benzene (C6H6) as a gas source. The stainless steel ball, as the counterpart, was tribotested. The input energy was calculated using the applied load, friction coefficient and sliding distance obtained from each tribotest. The wear loss of the ball increased as the sliding distance increased, whereas wear loss of the DLC was not directly observed. During evaluation of the input energy, the wear rate of the stainless steel ball decreased as the input energy increased. We propose a method for evaluating tribological properties using the input energy and discuss the wear behaviour of the stainless steel based on the input energy.

Original languageEnglish
Pages (from-to)161-167
Number of pages7
JournalTribology - Materials, Surfaces and Interfaces
Volume7
Issue number4
DOIs
Publication statusPublished - 2013 Dec

Fingerprint

Diamond
Stainless Steel
Diamonds
Carbon
Stainless steel
Wear of materials
Tungsten carbide
Benzene
Chemical vapor deposition
Gases
Friction
Plasmas
Substrates

Keywords

  • Diamond-like carbon
  • Input energy
  • Sliding wear
  • Stainless steel

ASJC Scopus subject areas

  • Mechanical Engineering
  • Materials Science(all)

Cite this

Tribological behaviour of stainless steel with respect to that of DLC in terms of energetic aspects. / Yamamoto, S.; Kawana, A.; Masuda, C.

In: Tribology - Materials, Surfaces and Interfaces, Vol. 7, No. 4, 12.2013, p. 161-167.

Research output: Contribution to journalArticle

@article{29e7e8d4ad664d928e3eafd00043d9ee,
title = "Tribological behaviour of stainless steel with respect to that of DLC in terms of energetic aspects",
abstract = "The tribological behaviour of stainless steel (SUS 440C) relative to that of diamond-like carbon (DLC) was investigated in terms of tribometer input energy. The DLC was prepared on tungsten carbide (WC) substrates using radio frequency plasma chemical vapour deposition with benzene (C6H6) as a gas source. The stainless steel ball, as the counterpart, was tribotested. The input energy was calculated using the applied load, friction coefficient and sliding distance obtained from each tribotest. The wear loss of the ball increased as the sliding distance increased, whereas wear loss of the DLC was not directly observed. During evaluation of the input energy, the wear rate of the stainless steel ball decreased as the input energy increased. We propose a method for evaluating tribological properties using the input energy and discuss the wear behaviour of the stainless steel based on the input energy.",
keywords = "Diamond-like carbon, Input energy, Sliding wear, Stainless steel",
author = "S. Yamamoto and A. Kawana and C. Masuda",
year = "2013",
month = "12",
doi = "10.1179/1751584X13Y.0000000042",
language = "English",
volume = "7",
pages = "161--167",
journal = "Tribology - Materials, Surfaces and Interfaces",
issn = "1751-5831",
publisher = "Maney Publishing",
number = "4",

}

TY - JOUR

T1 - Tribological behaviour of stainless steel with respect to that of DLC in terms of energetic aspects

AU - Yamamoto, S.

AU - Kawana, A.

AU - Masuda, C.

PY - 2013/12

Y1 - 2013/12

N2 - The tribological behaviour of stainless steel (SUS 440C) relative to that of diamond-like carbon (DLC) was investigated in terms of tribometer input energy. The DLC was prepared on tungsten carbide (WC) substrates using radio frequency plasma chemical vapour deposition with benzene (C6H6) as a gas source. The stainless steel ball, as the counterpart, was tribotested. The input energy was calculated using the applied load, friction coefficient and sliding distance obtained from each tribotest. The wear loss of the ball increased as the sliding distance increased, whereas wear loss of the DLC was not directly observed. During evaluation of the input energy, the wear rate of the stainless steel ball decreased as the input energy increased. We propose a method for evaluating tribological properties using the input energy and discuss the wear behaviour of the stainless steel based on the input energy.

AB - The tribological behaviour of stainless steel (SUS 440C) relative to that of diamond-like carbon (DLC) was investigated in terms of tribometer input energy. The DLC was prepared on tungsten carbide (WC) substrates using radio frequency plasma chemical vapour deposition with benzene (C6H6) as a gas source. The stainless steel ball, as the counterpart, was tribotested. The input energy was calculated using the applied load, friction coefficient and sliding distance obtained from each tribotest. The wear loss of the ball increased as the sliding distance increased, whereas wear loss of the DLC was not directly observed. During evaluation of the input energy, the wear rate of the stainless steel ball decreased as the input energy increased. We propose a method for evaluating tribological properties using the input energy and discuss the wear behaviour of the stainless steel based on the input energy.

KW - Diamond-like carbon

KW - Input energy

KW - Sliding wear

KW - Stainless steel

UR - http://www.scopus.com/inward/record.url?scp=84893100659&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84893100659&partnerID=8YFLogxK

U2 - 10.1179/1751584X13Y.0000000042

DO - 10.1179/1751584X13Y.0000000042

M3 - Article

VL - 7

SP - 161

EP - 167

JO - Tribology - Materials, Surfaces and Interfaces

JF - Tribology - Materials, Surfaces and Interfaces

SN - 1751-5831

IS - 4

ER -