Tuning hole charge collection efficiency in polymer photovoltaics by optimizing the work function of indium tin oxide electrodes with solution-processed LiF nanoparticles

Hasan Kurt, Junjun Jia, Yuzo Shigesato, Cleva W. Ow-Yang

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

By varying the density of solution-processed lithium fluoride (sol-LiF) nanoparticles at the interface between tin-doped indium oxide (ITO) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), we have demonstrated that the electronic hole collection efficiency of an organic photovoltaic cell can be optimized through tuning the energy level alignment at the ITO/PEDOT:PSS interface. We synthesized the LiF nanoparticles in solution and deposited them onto ITO electrodes with increasing surface coverage up to 13.2 %. The surface work function of the nanostructured ITO increased linearly from 4.88 to 5.30 eV. When the sol-LiF-modified ITO electrodes were incorporated into polymer solar cells based on a bulk heterojunction of poly(3-hexylthiophene) polymer and methanofullerene, a maximum power conversion efficiency was recorded for a device with an ITO anode modified by 5.3 % of sol-LiF coverage, which corresponded to a measured work function of 5.07 eV. The improvement in short circuit current density by 87 % and power conversion efficiency by 74.3 % suggest that the sol-LiF interlayer density enabled work function tuning of the ITO anode to better match the highest occupied molecular orbital level of PEDOT:PSS, facilitating hole charge collection. The increase in electronic hole collection efficiency is attributed to both a lowered resistance at the ITO modified by sol-LiF and faster hole transport, although these gains are offset by an associated increase in contact polarization. Our findings suggest that the surface work function of ITO can be tuned to improve energy level alignment with other contact layers via the surface density of sol-LiF particles. More efficient hole transport, due to higher recombination resistance, offset by an increased charge extraction barrier presented by contact polarization; the two effects combined give rise to an optimum in sol-LiF nanostructuring of the ITO surface properties.

Original languageEnglish
Pages (from-to)9205-9212
Number of pages8
JournalJournal of Materials Science: Materials in Electronics
Volume26
Issue number11
DOIs
Publication statusPublished - 2015 Nov 1
Externally publishedYes

Fingerprint

ITO (semiconductors)
Tin oxides
indium oxides
Nanoparticles
Indium
tin oxides
lithium fluorides
Polymers
Electrodes
Tuning
tuning
Lithium
nanoparticles
electrodes
polymers
Electron energy levels
Conversion efficiency
Anodes
Polarization
anodes

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Atomic and Molecular Physics, and Optics
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Cite this

@article{576b4653108f4a3a8f4a35d28845623f,
title = "Tuning hole charge collection efficiency in polymer photovoltaics by optimizing the work function of indium tin oxide electrodes with solution-processed LiF nanoparticles",
abstract = "By varying the density of solution-processed lithium fluoride (sol-LiF) nanoparticles at the interface between tin-doped indium oxide (ITO) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), we have demonstrated that the electronic hole collection efficiency of an organic photovoltaic cell can be optimized through tuning the energy level alignment at the ITO/PEDOT:PSS interface. We synthesized the LiF nanoparticles in solution and deposited them onto ITO electrodes with increasing surface coverage up to 13.2 {\%}. The surface work function of the nanostructured ITO increased linearly from 4.88 to 5.30 eV. When the sol-LiF-modified ITO electrodes were incorporated into polymer solar cells based on a bulk heterojunction of poly(3-hexylthiophene) polymer and methanofullerene, a maximum power conversion efficiency was recorded for a device with an ITO anode modified by 5.3 {\%} of sol-LiF coverage, which corresponded to a measured work function of 5.07 eV. The improvement in short circuit current density by 87 {\%} and power conversion efficiency by 74.3 {\%} suggest that the sol-LiF interlayer density enabled work function tuning of the ITO anode to better match the highest occupied molecular orbital level of PEDOT:PSS, facilitating hole charge collection. The increase in electronic hole collection efficiency is attributed to both a lowered resistance at the ITO modified by sol-LiF and faster hole transport, although these gains are offset by an associated increase in contact polarization. Our findings suggest that the surface work function of ITO can be tuned to improve energy level alignment with other contact layers via the surface density of sol-LiF particles. More efficient hole transport, due to higher recombination resistance, offset by an increased charge extraction barrier presented by contact polarization; the two effects combined give rise to an optimum in sol-LiF nanostructuring of the ITO surface properties.",
author = "Hasan Kurt and Junjun Jia and Yuzo Shigesato and Ow-Yang, {Cleva W.}",
year = "2015",
month = "11",
day = "1",
doi = "10.1007/s10854-015-3613-z",
language = "English",
volume = "26",
pages = "9205--9212",
journal = "Journal of Materials Science: Materials in Medicine",
issn = "0957-4530",
publisher = "Springer Netherlands",
number = "11",

}

TY - JOUR

T1 - Tuning hole charge collection efficiency in polymer photovoltaics by optimizing the work function of indium tin oxide electrodes with solution-processed LiF nanoparticles

AU - Kurt, Hasan

AU - Jia, Junjun

AU - Shigesato, Yuzo

AU - Ow-Yang, Cleva W.

PY - 2015/11/1

Y1 - 2015/11/1

N2 - By varying the density of solution-processed lithium fluoride (sol-LiF) nanoparticles at the interface between tin-doped indium oxide (ITO) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), we have demonstrated that the electronic hole collection efficiency of an organic photovoltaic cell can be optimized through tuning the energy level alignment at the ITO/PEDOT:PSS interface. We synthesized the LiF nanoparticles in solution and deposited them onto ITO electrodes with increasing surface coverage up to 13.2 %. The surface work function of the nanostructured ITO increased linearly from 4.88 to 5.30 eV. When the sol-LiF-modified ITO electrodes were incorporated into polymer solar cells based on a bulk heterojunction of poly(3-hexylthiophene) polymer and methanofullerene, a maximum power conversion efficiency was recorded for a device with an ITO anode modified by 5.3 % of sol-LiF coverage, which corresponded to a measured work function of 5.07 eV. The improvement in short circuit current density by 87 % and power conversion efficiency by 74.3 % suggest that the sol-LiF interlayer density enabled work function tuning of the ITO anode to better match the highest occupied molecular orbital level of PEDOT:PSS, facilitating hole charge collection. The increase in electronic hole collection efficiency is attributed to both a lowered resistance at the ITO modified by sol-LiF and faster hole transport, although these gains are offset by an associated increase in contact polarization. Our findings suggest that the surface work function of ITO can be tuned to improve energy level alignment with other contact layers via the surface density of sol-LiF particles. More efficient hole transport, due to higher recombination resistance, offset by an increased charge extraction barrier presented by contact polarization; the two effects combined give rise to an optimum in sol-LiF nanostructuring of the ITO surface properties.

AB - By varying the density of solution-processed lithium fluoride (sol-LiF) nanoparticles at the interface between tin-doped indium oxide (ITO) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), we have demonstrated that the electronic hole collection efficiency of an organic photovoltaic cell can be optimized through tuning the energy level alignment at the ITO/PEDOT:PSS interface. We synthesized the LiF nanoparticles in solution and deposited them onto ITO electrodes with increasing surface coverage up to 13.2 %. The surface work function of the nanostructured ITO increased linearly from 4.88 to 5.30 eV. When the sol-LiF-modified ITO electrodes were incorporated into polymer solar cells based on a bulk heterojunction of poly(3-hexylthiophene) polymer and methanofullerene, a maximum power conversion efficiency was recorded for a device with an ITO anode modified by 5.3 % of sol-LiF coverage, which corresponded to a measured work function of 5.07 eV. The improvement in short circuit current density by 87 % and power conversion efficiency by 74.3 % suggest that the sol-LiF interlayer density enabled work function tuning of the ITO anode to better match the highest occupied molecular orbital level of PEDOT:PSS, facilitating hole charge collection. The increase in electronic hole collection efficiency is attributed to both a lowered resistance at the ITO modified by sol-LiF and faster hole transport, although these gains are offset by an associated increase in contact polarization. Our findings suggest that the surface work function of ITO can be tuned to improve energy level alignment with other contact layers via the surface density of sol-LiF particles. More efficient hole transport, due to higher recombination resistance, offset by an increased charge extraction barrier presented by contact polarization; the two effects combined give rise to an optimum in sol-LiF nanostructuring of the ITO surface properties.

UR - http://www.scopus.com/inward/record.url?scp=84943587260&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84943587260&partnerID=8YFLogxK

U2 - 10.1007/s10854-015-3613-z

DO - 10.1007/s10854-015-3613-z

M3 - Article

VL - 26

SP - 9205

EP - 9212

JO - Journal of Materials Science: Materials in Medicine

JF - Journal of Materials Science: Materials in Medicine

SN - 0957-4530

IS - 11

ER -