Ultrasonic insert casting of aluminum alloy

J. Pan, Makoto Yoshida, G. Sasaki, H. Fukunaga, H. Fujimura, M. Matsuura

Research output: Contribution to journalArticle

21 Citations (Scopus)

Abstract

An ultrasonic insert cast device for preparing aluminum or steel pipe joining with aluminum alloy was designed to fabricate a test piece of metal/AC4C joint. The influences of ultrasound operation timing and ultrasound output power on the bonding strength and microstructure of the metal pipe/AC4C alloy joint were determined. Based on the results, a new process to fabricate an intake manifold for the automobile engine was derived.

Original languageEnglish
Pages (from-to)155-159
Number of pages5
JournalScripta Materialia
Volume43
Issue number2
DOIs
Publication statusPublished - 2000 May 3
Externally publishedYes

Fingerprint

Die casting inserts
inserts
aluminum alloys
Aluminum alloys
Casting
automobile engines
metal joints
ultrasonics
Ultrasonics
Automobile engine manifolds
Aluminum pipe
Metals
Automobile engines
casts
time measurement
steels
Steel pipe
aluminum
Joining
microstructure

ASJC Scopus subject areas

  • Materials Science(all)
  • Electronic, Optical and Magnetic Materials
  • Metals and Alloys

Cite this

Pan, J., Yoshida, M., Sasaki, G., Fukunaga, H., Fujimura, H., & Matsuura, M. (2000). Ultrasonic insert casting of aluminum alloy. Scripta Materialia, 43(2), 155-159. https://doi.org/10.1016/S1359-6462(00)00385-7

Ultrasonic insert casting of aluminum alloy. / Pan, J.; Yoshida, Makoto; Sasaki, G.; Fukunaga, H.; Fujimura, H.; Matsuura, M.

In: Scripta Materialia, Vol. 43, No. 2, 03.05.2000, p. 155-159.

Research output: Contribution to journalArticle

Pan, J, Yoshida, M, Sasaki, G, Fukunaga, H, Fujimura, H & Matsuura, M 2000, 'Ultrasonic insert casting of aluminum alloy', Scripta Materialia, vol. 43, no. 2, pp. 155-159. https://doi.org/10.1016/S1359-6462(00)00385-7
Pan J, Yoshida M, Sasaki G, Fukunaga H, Fujimura H, Matsuura M. Ultrasonic insert casting of aluminum alloy. Scripta Materialia. 2000 May 3;43(2):155-159. https://doi.org/10.1016/S1359-6462(00)00385-7
Pan, J. ; Yoshida, Makoto ; Sasaki, G. ; Fukunaga, H. ; Fujimura, H. ; Matsuura, M. / Ultrasonic insert casting of aluminum alloy. In: Scripta Materialia. 2000 ; Vol. 43, No. 2. pp. 155-159.
@article{2068bab2bade4c7da39588821d103d96,
title = "Ultrasonic insert casting of aluminum alloy",
abstract = "An ultrasonic insert cast device for preparing aluminum or steel pipe joining with aluminum alloy was designed to fabricate a test piece of metal/AC4C joint. The influences of ultrasound operation timing and ultrasound output power on the bonding strength and microstructure of the metal pipe/AC4C alloy joint were determined. Based on the results, a new process to fabricate an intake manifold for the automobile engine was derived.",
author = "J. Pan and Makoto Yoshida and G. Sasaki and H. Fukunaga and H. Fujimura and M. Matsuura",
year = "2000",
month = "5",
day = "3",
doi = "10.1016/S1359-6462(00)00385-7",
language = "English",
volume = "43",
pages = "155--159",
journal = "Scripta Materialia",
issn = "1359-6462",
publisher = "Elsevier Limited",
number = "2",

}

TY - JOUR

T1 - Ultrasonic insert casting of aluminum alloy

AU - Pan, J.

AU - Yoshida, Makoto

AU - Sasaki, G.

AU - Fukunaga, H.

AU - Fujimura, H.

AU - Matsuura, M.

PY - 2000/5/3

Y1 - 2000/5/3

N2 - An ultrasonic insert cast device for preparing aluminum or steel pipe joining with aluminum alloy was designed to fabricate a test piece of metal/AC4C joint. The influences of ultrasound operation timing and ultrasound output power on the bonding strength and microstructure of the metal pipe/AC4C alloy joint were determined. Based on the results, a new process to fabricate an intake manifold for the automobile engine was derived.

AB - An ultrasonic insert cast device for preparing aluminum or steel pipe joining with aluminum alloy was designed to fabricate a test piece of metal/AC4C joint. The influences of ultrasound operation timing and ultrasound output power on the bonding strength and microstructure of the metal pipe/AC4C alloy joint were determined. Based on the results, a new process to fabricate an intake manifold for the automobile engine was derived.

UR - http://www.scopus.com/inward/record.url?scp=0343789633&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0343789633&partnerID=8YFLogxK

U2 - 10.1016/S1359-6462(00)00385-7

DO - 10.1016/S1359-6462(00)00385-7

M3 - Article

AN - SCOPUS:0343789633

VL - 43

SP - 155

EP - 159

JO - Scripta Materialia

JF - Scripta Materialia

SN - 1359-6462

IS - 2

ER -