Understanding the structure development in hyperbranched polymers prepared by oligomeric A2+B3 approach: Comparison of experimental results and simulations

S. Unal, C. Oguz, E. Yilgor, M. Gallivan, Timothy Edward Long, I. Yilgor

Research output: Contribution to journalArticle

67 Citations (Scopus)

Abstract

Structure development in highly branched segmented polyurethaneureas based on oligomeric A2+B3 approach was investigated by experimental studies and kinetic Monte-Carlo simulations. In both simulations and experiments, hyperbranched polymers were produced by the slow addition of A2 onto B3. Experimental studies showed strong influence of solution concentration on the gel point and the extent of cyclization in the polymers formed. In polymerizations conducted at a solution concentration of 25% by weight gelation took place at the stoichiometric ratio [A 2]/[B3]=0.886. This is somewhat higher than the theoretical ratio of 0.75. In very dilute solutions, such as 5% solids by weight, no gelation was observed although the stoichiometric amount of A 2 added well exceeded the theoretical amount for gelation. Both experimental studies by size exclusion chromatography (SEC) and kinetic Monte-Carlo simulations demonstrated a gradual increase in polymer molecular weights as more A2 is added onto B3. This was followed by a sharp increase in the polymer molecular weight as the gel point is approached. A very similar behavior was observed for the polydispersity values of the polymers formed. Kinetic Monte-Carlo simulations performed at different cyclization ratios showed very good agreement with experimental results.

Original languageEnglish
Pages (from-to)4533-4543
Number of pages11
JournalPolymer
Volume46
Issue number13
DOIs
Publication statusPublished - 2005 Jun 17
Externally publishedYes

Fingerprint

Polymers
Gelation
Cyclization
Kinetics
Gels
Molecular weight
Size exclusion chromatography
Polydispersity
Polymerization
Monte Carlo simulation
Experiments

Keywords

  • Hyperbranched polymers
  • Polyurethanes
  • Simulations

ASJC Scopus subject areas

  • Organic Chemistry
  • Polymers and Plastics

Cite this

Understanding the structure development in hyperbranched polymers prepared by oligomeric A2+B3 approach : Comparison of experimental results and simulations. / Unal, S.; Oguz, C.; Yilgor, E.; Gallivan, M.; Long, Timothy Edward; Yilgor, I.

In: Polymer, Vol. 46, No. 13, 17.06.2005, p. 4533-4543.

Research output: Contribution to journalArticle

Unal, S. ; Oguz, C. ; Yilgor, E. ; Gallivan, M. ; Long, Timothy Edward ; Yilgor, I. / Understanding the structure development in hyperbranched polymers prepared by oligomeric A2+B3 approach : Comparison of experimental results and simulations. In: Polymer. 2005 ; Vol. 46, No. 13. pp. 4533-4543.
@article{2431c210a5d84c508a5c8bc4270d18e8,
title = "Understanding the structure development in hyperbranched polymers prepared by oligomeric A2+B3 approach: Comparison of experimental results and simulations",
abstract = "Structure development in highly branched segmented polyurethaneureas based on oligomeric A2+B3 approach was investigated by experimental studies and kinetic Monte-Carlo simulations. In both simulations and experiments, hyperbranched polymers were produced by the slow addition of A2 onto B3. Experimental studies showed strong influence of solution concentration on the gel point and the extent of cyclization in the polymers formed. In polymerizations conducted at a solution concentration of 25{\%} by weight gelation took place at the stoichiometric ratio [A 2]/[B3]=0.886. This is somewhat higher than the theoretical ratio of 0.75. In very dilute solutions, such as 5{\%} solids by weight, no gelation was observed although the stoichiometric amount of A 2 added well exceeded the theoretical amount for gelation. Both experimental studies by size exclusion chromatography (SEC) and kinetic Monte-Carlo simulations demonstrated a gradual increase in polymer molecular weights as more A2 is added onto B3. This was followed by a sharp increase in the polymer molecular weight as the gel point is approached. A very similar behavior was observed for the polydispersity values of the polymers formed. Kinetic Monte-Carlo simulations performed at different cyclization ratios showed very good agreement with experimental results.",
keywords = "Hyperbranched polymers, Polyurethanes, Simulations",
author = "S. Unal and C. Oguz and E. Yilgor and M. Gallivan and Long, {Timothy Edward} and I. Yilgor",
year = "2005",
month = "6",
day = "17",
doi = "10.1016/j.polymer.2005.03.073",
language = "English",
volume = "46",
pages = "4533--4543",
journal = "Polymer (United Kingdom)",
issn = "0032-3861",
publisher = "Elsevier BV",
number = "13",

}

TY - JOUR

T1 - Understanding the structure development in hyperbranched polymers prepared by oligomeric A2+B3 approach

T2 - Comparison of experimental results and simulations

AU - Unal, S.

AU - Oguz, C.

AU - Yilgor, E.

AU - Gallivan, M.

AU - Long, Timothy Edward

AU - Yilgor, I.

PY - 2005/6/17

Y1 - 2005/6/17

N2 - Structure development in highly branched segmented polyurethaneureas based on oligomeric A2+B3 approach was investigated by experimental studies and kinetic Monte-Carlo simulations. In both simulations and experiments, hyperbranched polymers were produced by the slow addition of A2 onto B3. Experimental studies showed strong influence of solution concentration on the gel point and the extent of cyclization in the polymers formed. In polymerizations conducted at a solution concentration of 25% by weight gelation took place at the stoichiometric ratio [A 2]/[B3]=0.886. This is somewhat higher than the theoretical ratio of 0.75. In very dilute solutions, such as 5% solids by weight, no gelation was observed although the stoichiometric amount of A 2 added well exceeded the theoretical amount for gelation. Both experimental studies by size exclusion chromatography (SEC) and kinetic Monte-Carlo simulations demonstrated a gradual increase in polymer molecular weights as more A2 is added onto B3. This was followed by a sharp increase in the polymer molecular weight as the gel point is approached. A very similar behavior was observed for the polydispersity values of the polymers formed. Kinetic Monte-Carlo simulations performed at different cyclization ratios showed very good agreement with experimental results.

AB - Structure development in highly branched segmented polyurethaneureas based on oligomeric A2+B3 approach was investigated by experimental studies and kinetic Monte-Carlo simulations. In both simulations and experiments, hyperbranched polymers were produced by the slow addition of A2 onto B3. Experimental studies showed strong influence of solution concentration on the gel point and the extent of cyclization in the polymers formed. In polymerizations conducted at a solution concentration of 25% by weight gelation took place at the stoichiometric ratio [A 2]/[B3]=0.886. This is somewhat higher than the theoretical ratio of 0.75. In very dilute solutions, such as 5% solids by weight, no gelation was observed although the stoichiometric amount of A 2 added well exceeded the theoretical amount for gelation. Both experimental studies by size exclusion chromatography (SEC) and kinetic Monte-Carlo simulations demonstrated a gradual increase in polymer molecular weights as more A2 is added onto B3. This was followed by a sharp increase in the polymer molecular weight as the gel point is approached. A very similar behavior was observed for the polydispersity values of the polymers formed. Kinetic Monte-Carlo simulations performed at different cyclization ratios showed very good agreement with experimental results.

KW - Hyperbranched polymers

KW - Polyurethanes

KW - Simulations

UR - http://www.scopus.com/inward/record.url?scp=18844433847&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=18844433847&partnerID=8YFLogxK

U2 - 10.1016/j.polymer.2005.03.073

DO - 10.1016/j.polymer.2005.03.073

M3 - Article

AN - SCOPUS:18844433847

VL - 46

SP - 4533

EP - 4543

JO - Polymer (United Kingdom)

JF - Polymer (United Kingdom)

SN - 0032-3861

IS - 13

ER -