Voltage Control Using PV Power Factor, Static Capacitor, and Transformer Tap for Large PV Penetration

Shunsuke Aida, Takayuki Ito, Shinichi Iwamoto, Ryohei Kitada, Nobuyuki Ariyoshi

    Research output: Contribution to journalArticle

    1 Citation (Scopus)

    Abstract

    The Japanese government has set 53 GW as the target level of PV deployment by 2030. However, the large-scale introduction of PV will cause several problems in power systems. One of these problems is the increase in voltage due to decreased load demands associated with large PV active power output. Another problem is voltage variations caused by fluctuations in PV system output. In this paper, we focus our attention on the voltage and reactive power control for large-scale PV deployment and propose voltage control using the PF (PV power factor), SC (static capacitor), and TAP (transformer tap). In the proposed method, the SC and TAP controls consider voltage stability through the use of VMPI-i and VMPI-i sensitivity, and the PF control suppresses voltage variation and voltage spikes. Finally, we simulate these controls using the Ward-Hale system to verify the validity of the proposed method.

    Original languageEnglish
    Pages (from-to)21-31
    Number of pages11
    JournalElectrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)
    Volume196
    Issue number4
    DOIs
    Publication statusPublished - 2016 Sep 1

    Keywords

    • photovoltaic power
    • power factor control
    • static capacitor
    • voltage control
    • voltage spike
    • voltage variation

    ASJC Scopus subject areas

    • Electrical and Electronic Engineering
    • Energy Engineering and Power Technology

    Fingerprint Dive into the research topics of 'Voltage Control Using PV Power Factor, Static Capacitor, and Transformer Tap for Large PV Penetration'. Together they form a unique fingerprint.

  • Cite this