Water/acetone permeability of porous hollow-fiber membrane containing diethylamino groups on the grafted polymer branches.

Satoshi Tsuneda, Kyoichi Saito, Shintaro Furusaki, Takanobu Sugo, Isao Ishigaki

Research output: Contribution to journalArticle

58 Citations (Scopus)

Abstract

Dietylamino (DEA) groups were introduced into a porous hollow-fiber membrane having a nominal pore size of 0.34 micrometer and porosity of 71% via two reactions: graft polymerization glycidyl methacrylate (GMA) and subsequent functionalization. The graft chains were formed both on the pore surface and in the amorphous domain of the polymer matrix, and were distributed uniformly throughout the membrane. Water and acetone were forced to permeate across the porous membrane the DEA group density of which ranged up to 6.7 mol per kg of the starting hollow fiber membrane with a 100% constant degree of GMA grafting. The density of the DEA groups on the graft chains induced conformational changes which altered the permeability of the membrane. The pure water flux curve exhibited a sharp decrease at a conversion ratio of the epoxide group to the DEA group between 40 and 60%. The acetone flux curve had a maximum value near the 20% conversion point. The DEA-group-containing membrane, with a conversion below 20%, showed a higher swelling in acetone than in water. This is due to the swelling of the graft chains invading the amorphous domains.

Original languageEnglish
Pages (from-to)1-12
Number of pages12
JournalJournal of Membrane Science
Volume71
Issue number1-2
DOIs
Publication statusPublished - 1992 Jul 3
Externally publishedYes

Fingerprint

Acetone
acetone
hollow
Permeability
permeability
Polymers
membranes
Membranes
Grafts
fibers
Water
Fibers
polymers
water
Transplants
porosity
swelling
Swelling
Fluxes
epoxy compounds

Keywords

  • diethylamino groups
  • hollow fiber membranes
  • microfiltration
  • pure water flux
  • radiation-induced graft polymerization

ASJC Scopus subject areas

  • Filtration and Separation
  • Polymers and Plastics

Cite this

Water/acetone permeability of porous hollow-fiber membrane containing diethylamino groups on the grafted polymer branches. / Tsuneda, Satoshi; Saito, Kyoichi; Furusaki, Shintaro; Sugo, Takanobu; Ishigaki, Isao.

In: Journal of Membrane Science, Vol. 71, No. 1-2, 03.07.1992, p. 1-12.

Research output: Contribution to journalArticle

Tsuneda, Satoshi ; Saito, Kyoichi ; Furusaki, Shintaro ; Sugo, Takanobu ; Ishigaki, Isao. / Water/acetone permeability of porous hollow-fiber membrane containing diethylamino groups on the grafted polymer branches. In: Journal of Membrane Science. 1992 ; Vol. 71, No. 1-2. pp. 1-12.
@article{3174d0314f064935b37ab6e3ce56141c,
title = "Water/acetone permeability of porous hollow-fiber membrane containing diethylamino groups on the grafted polymer branches.",
abstract = "Dietylamino (DEA) groups were introduced into a porous hollow-fiber membrane having a nominal pore size of 0.34 micrometer and porosity of 71{\%} via two reactions: graft polymerization glycidyl methacrylate (GMA) and subsequent functionalization. The graft chains were formed both on the pore surface and in the amorphous domain of the polymer matrix, and were distributed uniformly throughout the membrane. Water and acetone were forced to permeate across the porous membrane the DEA group density of which ranged up to 6.7 mol per kg of the starting hollow fiber membrane with a 100{\%} constant degree of GMA grafting. The density of the DEA groups on the graft chains induced conformational changes which altered the permeability of the membrane. The pure water flux curve exhibited a sharp decrease at a conversion ratio of the epoxide group to the DEA group between 40 and 60{\%}. The acetone flux curve had a maximum value near the 20{\%} conversion point. The DEA-group-containing membrane, with a conversion below 20{\%}, showed a higher swelling in acetone than in water. This is due to the swelling of the graft chains invading the amorphous domains.",
keywords = "diethylamino groups, hollow fiber membranes, microfiltration, pure water flux, radiation-induced graft polymerization",
author = "Satoshi Tsuneda and Kyoichi Saito and Shintaro Furusaki and Takanobu Sugo and Isao Ishigaki",
year = "1992",
month = "7",
day = "3",
doi = "10.1016/0376-7388(92)85001-Y",
language = "English",
volume = "71",
pages = "1--12",
journal = "Jornal of Membrane Science",
issn = "0376-7388",
publisher = "Elsevier",
number = "1-2",

}

TY - JOUR

T1 - Water/acetone permeability of porous hollow-fiber membrane containing diethylamino groups on the grafted polymer branches.

AU - Tsuneda, Satoshi

AU - Saito, Kyoichi

AU - Furusaki, Shintaro

AU - Sugo, Takanobu

AU - Ishigaki, Isao

PY - 1992/7/3

Y1 - 1992/7/3

N2 - Dietylamino (DEA) groups were introduced into a porous hollow-fiber membrane having a nominal pore size of 0.34 micrometer and porosity of 71% via two reactions: graft polymerization glycidyl methacrylate (GMA) and subsequent functionalization. The graft chains were formed both on the pore surface and in the amorphous domain of the polymer matrix, and were distributed uniformly throughout the membrane. Water and acetone were forced to permeate across the porous membrane the DEA group density of which ranged up to 6.7 mol per kg of the starting hollow fiber membrane with a 100% constant degree of GMA grafting. The density of the DEA groups on the graft chains induced conformational changes which altered the permeability of the membrane. The pure water flux curve exhibited a sharp decrease at a conversion ratio of the epoxide group to the DEA group between 40 and 60%. The acetone flux curve had a maximum value near the 20% conversion point. The DEA-group-containing membrane, with a conversion below 20%, showed a higher swelling in acetone than in water. This is due to the swelling of the graft chains invading the amorphous domains.

AB - Dietylamino (DEA) groups were introduced into a porous hollow-fiber membrane having a nominal pore size of 0.34 micrometer and porosity of 71% via two reactions: graft polymerization glycidyl methacrylate (GMA) and subsequent functionalization. The graft chains were formed both on the pore surface and in the amorphous domain of the polymer matrix, and were distributed uniformly throughout the membrane. Water and acetone were forced to permeate across the porous membrane the DEA group density of which ranged up to 6.7 mol per kg of the starting hollow fiber membrane with a 100% constant degree of GMA grafting. The density of the DEA groups on the graft chains induced conformational changes which altered the permeability of the membrane. The pure water flux curve exhibited a sharp decrease at a conversion ratio of the epoxide group to the DEA group between 40 and 60%. The acetone flux curve had a maximum value near the 20% conversion point. The DEA-group-containing membrane, with a conversion below 20%, showed a higher swelling in acetone than in water. This is due to the swelling of the graft chains invading the amorphous domains.

KW - diethylamino groups

KW - hollow fiber membranes

KW - microfiltration

KW - pure water flux

KW - radiation-induced graft polymerization

UR - http://www.scopus.com/inward/record.url?scp=0027110619&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027110619&partnerID=8YFLogxK

U2 - 10.1016/0376-7388(92)85001-Y

DO - 10.1016/0376-7388(92)85001-Y

M3 - Article

VL - 71

SP - 1

EP - 12

JO - Jornal of Membrane Science

JF - Jornal of Membrane Science

SN - 0376-7388

IS - 1-2

ER -