創造理工学部

  • Japan

研究成果

フィルター
Paper

Thermal adaptation of occupants in an atrium with environmental preference

Ikeda, N., Kato, S., Nakano, J. & Tanabe, S., 2015 1 1.

研究成果: Paper

Verifying the validity of facade design strategy through optimization of digital modeling tools

Nagoshi, M., Tsushima, S., Kato, S., Harada, N. & Tanabe, S., 2015 1 1.

研究成果: Paper

2014

Comfortable thermal environment for people sensitive to cold in housing during summer

Tsuzuki, H., Tanabe, S. I., Sato, Y. & Saito, M., 2014 1 1, p. 730-736. 7 p.

研究成果: Paper

Development of a smart reconfigurable reflector prototype for an extremely high frequency antenna

Tanaka, H., Sakamoto, H., Inagaki, A., Ishimura, K., Doi, A., Kono, Y., Oyama, T., Watanabe, K., Oikawa, Y. & Kuratomi, T., 2014 1 1.

研究成果: Paper

6 引用 (Scopus)

Effects of unsteady thermal stimulus from contact surface on thermal comfort

Hirose, A., Kubo, H., Shinohara, M., Kagiya, S. I., Oohira, N., Shimanuki, Y. & Tanabe, S. I., 2014 1 1, p. 138-145. 8 p.

研究成果: Paper

Evaluation of infection-control effectiveness through use of an infection-control bed

Arai, K., Ogata, M., Fujiwara, M., Tsutsumi, H., Morimoto, S., Tanabe, S. I., Hori, S. & Ariga, T., 2014 1 1, p. 1-8. 8 p.

研究成果: Paper

Evaluation of natural ventilation performance and thermal comfort in railway station

Kato, S., Tanabe, S. I., Kawamata, D., Unno, K., Nakano, J., Sakamoto, K., Kase, S., Oishi, H. & Takahashi, A., 2014 1 1, p. 208-214. 7 p.

研究成果: Paper

4 引用 (Scopus)

Field measurement on thermal comfort of patients and medical staff in a dialysis room

Tsutsumi, H., Fujiwara, M., Tanabe, S. I., Hori, S., Shimizu, Y., Io, H., Hamada, C. & Tomino, Y., 2014 1 1, p. 430-437. 8 p.

研究成果: Paper

Full-scale fire tests of 3-storey wooden school building

Hasemi, Y., Yasui, N., Itagaki, N., Izumi, J., Osaka, T., Kaku, T., Naruse, T., Hagiwara, I., Kagiya, K., Suzuki, J. & Kato, K., 2014 1 1.

研究成果: Paper

5 引用 (Scopus)

How to apply approved leed simulation for sustainable buildings in Japan

Yang, J. H., Kim, H. T. & Tanabe, S. I., 2014 1 1, p. 282-288. 7 p.

研究成果: Paper

Novel method to measure emission rate of VOCs - Emission of Formaldehyde

Nakamura, S., Kim, H. & Tanabe, S. I., 2014 1 1, p. 103-108. 6 p.

研究成果: Paper

Prediction of flame spread along a wooden surface of wall against localized fire

Harada, K., Hirai, N., Hasemi, Y., Fujita, K. & Inoue, M., 2014 1 1.

研究成果: Paper

Productivity and indoor environmental quality of research institution with refreshment and communication area

Kuzuu, E., Tanabe, S. I., Nagareda, A., Harada, N., Abe, M., Oshikubo, M., Nakamura, Y., Oshima, H., Wada, S. & Taguchi, H., 2014 1 1, p. 927-933. 7 p.

研究成果: Paper

Reduction of droplet nuclei in 4 bed room

Morimoto, S., Tang, H., Tanabe, S. I., Tsutsumi, H. & Hori, S., 2014 1 1, p. 45-51. 7 p.

研究成果: Paper

Size of multibed patient room and airborne infection risk

Ogata, M., Suzuki, M., Tanabe, S. I., Hori, S., Morimoto, S. & Tsutsumi, H., 2014 1 1, p. 52-57. 6 p.

研究成果: Paper

Taking into account heat and daylight to Verify and improve a multistory double-skin facade

Harada, N., Tanabe, S. I., Nagareda, A., Kuzuu, E., Abe, M., Oshikubo, M., Nakamura, Y., Oshima, H., Wada, S. & Taguchi, H., 2014 1 1, p. 360-367. 8 p.

研究成果: Paper

The concentration of phthalate in settled dust in kindergartens and emission source

Kim, H. T., Tanabe, S. I. & Hatano, H., 2014 1 1, p. 75-80. 6 p.

研究成果: Paper

The importance of non-energy benefits in living environments for promoting stress-related health

Yamaguchi, R., Nagasawa, N., Kato, R., Tsutsumi, H., Matsuoka, Y., Akimoto, T. & Tanabe, S. I., 2014 1 1, p. 851-858. 8 p.

研究成果: Paper

Thermal comfort of radiant ceiling panel cooling system installed in an office in Japan

Ishii, Y., Tanabe, S. I., Kitahara, T., Yamagata, F. & Tatara, K., 2014 1 1, p. 169-174. 6 p.

研究成果: Paper

Thermal comfort zone of SEMI-outdoor public spaces

Nakano, J. & Tanabe, S. I., 2014 1 1, p. 314-319. 6 p.

研究成果: Paper

Workers' awareness and indoor environmental quality in power-saving offices

Tsushima, S., Tanabe, S. I., Nishihara, N., Hiraoka, M., Hiromoto, S. I., Komoda, H. & Tabuchi, S., 2014 1 1, p. 938-945. 8 p.

研究成果: Paper

1 引用 (Scopus)
2013

A biological humanoid joint controller based on muscle model

Meng, F., Chen, X., Xue, J., Wang, C., Shi, Q., Takanishi, A. & Huang, Q., 2013 1 1, p. 1336-1340. 5 p.

研究成果: Paper

2 引用 (Scopus)

A fundamental study on the molybdenum recovery from the copper smelting slag by slow cooling

Sudo, S., Okura, T. & Tokoro, C., 2013 10 8, p. 689-702. 14 p.

研究成果: Paper

1 引用 (Scopus)
4 引用 (Scopus)
2 引用 (Scopus)

An experimental study on mechanical properties of SBHS700 and application of SBHS700 to stiffened plates

Hamamura, K., Ono, K., Matsumura, M., Tarui, T. & Koda, S., 2013 1 1.

研究成果: Paper

1 引用 (Scopus)

A novel approach to evaluate skills in Endotracheal Intubation using biomechanical measurement system

Matsuoka, Y., Bartolomeo, L., Chihara, T., Imtiaz, U., Saito, K., Kong, W., Noh, Y., Kasuya, Y., Nagai, M., Ozaki, M., Wang, C., Sessa, S., Ishii, H., Zecca, M. & Takanishi, A., 2013 1 1, p. 1456-1461. 6 p.

研究成果: Paper

3 引用 (Scopus)

A study on measuring of reinforced-concrete structure by 3D laser scanner and making design of pre-cut interior finishing components with polygon model

Ishida, K., Kano, N., Igarashi, T., Fujii, H., Oosawa, Y., Sakamoto, S. & Tomita, H., 2013 1 1, p. 1208-1215. 8 p.

研究成果: Paper

公開
1 引用 (Scopus)

Concentration of PGMs from automobile catalyst by combining surface grinding and quenching

Liu, G., Tokumaru, A. & Owada, S., 2013 10 8, p. 235-254. 20 p.

研究成果: Paper

Development of a head robot with facial expression for training on neurological disorders

Chihara, T., Wang, C., Niibori, A., Oishio, T., Matsuoka, Y., Sessa, S., Ishii, H., Nakae, Y., Matsuoka, N., Takayama, T. & Takanishi, A., 2013 1 1, p. 1384-1389. 6 p.

研究成果: Paper

4 引用 (Scopus)

Development of a real-time IMU-based motion capture system for gait rehabilitation

Kong, W., Sessa, S., Cosentino, S., Zecca, M., Saito, K., Wang, C., Imtiaz, U., Lin, Z., Bartolomeo, L., Ishii, H., Ikai, T. & Takanishi, A., 2013 1 1, p. 2100-2105. 6 p.

研究成果: Paper

16 引用 (Scopus)

Development of robotic system for autonomous liver screening using ultrasound scanning device

Mustafa, A. S. B., Ishii, T., Matsunaga, Y., Nakadate, R., Ishii, H., Ogawa, K., Saito, A., Sugawara, M., Niki, K. & Takanishi, A., 2013 1 1, p. 804-809. 6 p.

研究成果: Paper

16 引用 (Scopus)

Distribution ratios of platinum group metals between the Al 2O3-CaO-SiO2 Slag and molten iron at 1873K

Yamaguchi, K., Sekimoto, H., Kon, T., Ishizaka, A., Yoshida, T. & Honda, T., 2013 10 8, p. 267-276. 10 p.

研究成果: Paper

4 引用 (Scopus)

Fundamental studies on arsenic removal from copper concentrate by heat treatment

Shibuya, S., Tokoro, C. & Okura, T., 2013 10 8, p. 111-122. 12 p.

研究成果: Paper

1 引用 (Scopus)

Human-humanoid robot social interaction: Laughter

Cosentino, S., Kishi, T., Zecca, M., Sessa, S., Bartolomeo, L., Hashimoto, K., Nozawa, T. & Takanishi, A., 2013 1 1, p. 1396-1401. 6 p.

研究成果: Paper

8 引用 (Scopus)

Hybrid gait pattern generator capable of rapid and dynamically consistent pattern regeneration

Kryczka, P., Kormushev, P., Hashimoto, K., Lim, H. O., Tsagarakis, N. G., Caldwell, D. G. & Takanishi, A., 2013 1 1, p. 475-480. 6 p.

研究成果: Paper

1 引用 (Scopus)

Laser displacement-meter with long-working-distance for large precise structures

Kawano, T. & Ishimura, K., 2013 1 1, p. 2402-2405. 4 p.

研究成果: Paper