川田 宏之

研究成果

年別の研究成果 1981 2007 2008 2009 2010 2011 2012 2020 2022

• 93 Article
• 40 Conference contribution
• 10 Paper
• 6 Conference article
• 1 その他
  • 1 Editorial

年別の研究成果

年別の研究成果

検索結果

• Article

  A comprehensive model for determining tensile strengths of various unidirectional composites

  Koyanagi, J., Hatta, H., Kotani, M. & Kawada, H., 2009 8月, In: Journal of Composite Materials. 43, 18, p. 1901-1914 14 p.

  研究成果: Article › 査読

  • Tensile Strength 100%
  • Tensile strength 94%
  • Fibers 80%
  • Composite materials 68%
  • Composite Material 58%
  49 被引用数 (Scopus)

• Analysis of thermal deformation on a honeycomb sandwich CFRP mirror

  Arao, Y., Koyanagi, J., Utsunomiya, S. & Kawada, H., 2010 7月, In: Mechanics of Advanced Materials and Structures. 17, 5, p. 328-334 7 p.

  研究成果: Article › 査読

  • Thermal Deformation 100%
  • Honeycomb 74%
  • Reinforced Plastic 66%
  • Sandwich 66%
  • Mirror 60%
  23 被引用数 (Scopus)

• Analysis of time-dependent deformation of a CFRP mirror under hot and humid conditions

  Arao, Y., Koyanagi, J., Utsunomiya, S., Takeda, S. I. & Kawada, H., 2009 5月, In: Mechanics of Time-Dependent Materials. 13, 2, p. 183-197 15 p.

  研究成果: Article › 査読

  • Reinforced Plastic 100%
  • Carbon fiber reinforced plastics 88%
  • Mirrors 83%
  • Carbon Fiber 74%
  • Creep 50%
  22 被引用数 (Scopus)

• Analysis of time-dependent deformation of CFRP considering the anisotropy of moisture diffusion

  Arao, Y., Koyanagi, J., Hatta, H. & Kawada, H., 2008 11月 1, In: Advanced Composite Materials. 17, 4, p. 359-372 14 p.

  研究成果: Article › 査読

  • Reinforced Plastic 100%
  • Carbon fiber reinforced plastics 88%
  • Coefficient of Hygroscopic Expansion 88%
  • Anisotropy 84%
  • Moisture 70%
  17 被引用数 (Scopus)

• An improved shear-lag model for a single fiber composite with a ductile matrix

  Kimura, S., Koyanagi, J., Hama, T. & Kawada, H., 2007 1月 1, In: Key Engineering Materials. 334-335 I, p. 333-336 4 p.

  研究成果: Article › 査読

  • Fibers 100%
  • Reinforced Plastic 89%
  • Composite materials 84%
  • Stress concentration 83%
  • Composite Material 72%
  4 被引用数 (Scopus)

• A numerical simulation of time-dependent interface failure under shear and compressive loads in single-fiber composites

  Koyanagi, J., Yoshimura, A., Kawada, H. & Aoki, Y., 2010 2月, In: Applied Composite Materials. 17, 1, p. 31-41 11 p.

  研究成果: Article › 査読

  • Shear 100%
  • Fibers 74%
  • Simulation 68%
  • Composite materials 63%
  • Computer simulation 59%
  23 被引用数 (Scopus)

• Applicability of fracture toughness concept to fracture behavior of carbon/carbon composites

  Hatta, H., Kogo, Y., Asano, H. & Kawada, H., 1998, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 64, 620, p. 897-903 7 p.

  研究成果: Article › 査読

  Open Access

  • Carbon carbon composites 100%
  • Fracture Toughness 78%
  • Fracture toughness 61%
  • Fracture mechanics 52%
  • Fracture Mechanics 39%
  5 被引用数 (Scopus)

• Applicability of fracture toughness concept to fracture behavior of carbon/carbon composites

  Hatta, H., Kogo, Y., Asano, H. & Kawada, H., 1999, In: JSME International Journal, Series A: Mechanics and Material Engineering. 42, 2, p. 265-271 7 p.

  研究成果: Article › 査読

  Open Access

  • Carbon carbon composites 100%
  • Fracture toughness 61%
  • Fracture mechanics 41%
  • Bending tests 14%
  • Elastic moduli 11%
  9 被引用数 (Scopus)

• A study on stress-corrosion cracking using single fiber model specimen (degradation properties of GFRP caused by water absorption)

  Kawada, H. & Kobiki, A., 2003 7月, In: JSME International Journal, Series A: Solid Mechanics and Material Engineering. 46, 3, p. 303-307 5 p.

  研究成果: Article › 査読

  • Stress Corrosion Cracking 100%
  • Degradation Property 99%
  • Water absorption 87%
  • Stress corrosion cracking 83%
  • Degradation 53%
  7 被引用数 (Scopus)

• Carbon fiber-can we develop materials beyond carbon fiber?

  Kawada, H., 2017, In: Sen'i Gakkaishi. 73, 10, p. 375-379 5 p.

  研究成果: Article › 査読
  2 被引用数 (Scopus)

• Compressive-compressive fatigue characteristics of GFRP [±45°] pipes at the cryogenic temperature (life prediction with energy dissipation based on the viscoelastic-plastic model)

  Kawada, H., Sakai, S., Waki, Y., Shimizu, T., Yamashita, K. & Koudu, H., 2000, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 66, 643, p. 489-495 7 p.

  研究成果: Article › 査読

  Open Access

  • Cryogenics 100%
  • Dissipation 99%
  • Energy dissipation 77%
  • Pipe 68%
  • Plastics 66%
  2 被引用数 (Scopus)

• Delayed fracture of E glass fiber under water environment

  Kobiki, A., Iitaka, S., Shioda, S. & Kawada, H., 2006 1月, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 72, 1, p. 85-92 8 p.

  研究成果: Article › 査読

  Open Access

  • Glass fibers 100%
  • Glass 70%
  • Environment 58%
  • Water 55%
  • Moisture 50%
  2 被引用数 (Scopus)

• Design and evaluation frontiers of composite materials III: Quantitative evaluation of damage in composite materials - Analysis of evolution of transverse cracking and stress corrosion cracking

  Motogi, S. & Kawada, H., 1997, In: Zairyo/Journal of the Society of Materials Science, Japan. 46, 3, p. 322-328 7 p.

  研究成果: Article › 査読

  Open Access

• Dimensional stability of epoxy-based and cyanate-based carbon fiber-reinforced plastics

  Arao, Y., Fukui, T., Niwa, T. & Kawada, H., 2015 5月 4, In: Journal of Composite Materials. 49, 12, p. 1483-1492 10 p.

  研究成果: Article › 査読

  • Cyanate 100%
  • Residual Stress 99%
  • Dimensional stability 93%
  • Creep 92%
  • Reinforced Plastic 91%
  7 被引用数 (Scopus)

• Direct exfoliation of layered materials in low-boiling point solvents using weak acid salts

  Arao, Y., Tanks, J. D., Kubouchi, M., Ito, A., Hosoi, A. & Kawada, H., 2019 2月, In: Carbon. 142, p. 261-268 8 p.

  研究成果: Article › 査読

  • Exfoliation (materials science) 100%
  • Boiling point 82%
  • Acid Salt 74%
  • Exfoliation 66%
  • Salts 58%
  11 被引用数 (Scopus)

• Dynamic tensile properties of carbon fiber composite based on thermoplastic epoxy resin loaded in matrix-dominant directions

  Taniguchi, N., Nishiwaki, T., Hirayama, N., Nishida, H. & Kawada, H., 2009 2月, In: Composites Science and Technology. 69, 2, p. 207-213 7 p.

  研究成果: Article › 査読

  • Epoxy resins 100%
  • Tensile properties 95%
  • Thermoplastics 93%
  • Epoxy Resin 91%
  • Carbon fibers 87%
  34 被引用数 (Scopus)

• Effect of Hole Diameter on Compressive Strength of Unidirectional AFRP Application of Two Failure Criteria

  Kawada, H. & Hayashi, I., 1995, In: Journal of the Society of Materials Science, Japan. 44, 499, p. 464-469 6 p.

  研究成果: Article › 査読

  Open Access

  • compressive strength 100%
  • Compression Strength 91%
  • Compressive strength 75%
  • Stress concentration 49%
  • Fracture Mechanics 43%
  3 被引用数 (Scopus)

• Effect of Notch Root Radius on Fracture of Glass/Epoxy Laminates (under Tensile Loading)

  Kawada, H., Hayashi, I., Hosoi, T. & Hiramoto, J., 1987, In: Zairyo/Journal of the Society of Materials Science, Japan. 36, 403, p. 390-396 7 p.

  研究成果: Article › 査読

  Open Access

  • notches 100%
  • laminates 85%
  • Laminates 83%
  • Bending tests 73%
  • Glass 72%

• Effect of ply angle misalignment on out-of-plane deformation of symmetrical cross-ply CFRP laminates: Accuracy of the ply angle alignment

  Arao, Y., Koyanagi, J., Utsunomiya, S. & Kawada, H., 2011 3月, In: Composite Structures. 93, 4, p. 1225-1230 6 p.

  研究成果: Article › 査読

  • Laminated Plastic 100%
  • Plastic laminates 83%
  • Reinforced Plastic 69%
  • Carbon fiber reinforced plastics 61%
  • Monte Carlo Method 59%
  42 被引用数 (Scopus)

• Effect of ply thickness on transverse crack initiation in CFRP cross-ply laminates under fatigue loading

  Kurihara, K., Hosoi, A., Sato, N. & Kawada, H., 2013, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 79, 799, p. 249-265 17 p.

  研究成果: Article › 査読

  • Crack Initiation 100%
  • Reinforced Plastic 79%
  • Carbon fiber reinforced plastics 70%
  • Crack initiation 63%
  • Carbon Fiber 59%
  7 被引用数 (Scopus)

• Effect of Shear Damage on the Fracture Behavior of Carbon-Carbon Composites

  Goto, K., Hatta, H., Takahashi, H. & Kawada, H., 2001 6月, In: Journal of the American Ceramic Society. 84, 6, p. 1327-1333 7 p.

  研究成果: Article › 査読

  • Carbon carbon composites 100%
  • Shear 63%
  • Carbon 52%
  • Composite materials 40%
  • Composite Material 34%
  31 被引用数 (Scopus)

• Effect of stress concentration on tensile fracture behavior of carbon-carbon composites

  Kogo, Y., Hatta, H., Kawada, H. & Machida, T., 1998, In: Journal of Composite Materials. 32, 13, p. 1273-1294 22 p.

  研究成果: Article › 査読

  • Fracture Mechanics 100%
  • Carbon carbon composites 95%
  • Stress Relaxation 87%
  • Stress concentration 56%
  • Stress relaxation 39%
  41 被引用数 (Scopus)

• Effect of testing speed on energy absorption in CF / PEEK tubes

  Kawada, H., Okabe, T., Mawatari, T. & Satoh, H., 1997, In: Zairyo/Journal of the Society of Materials Science, Japan. 46, 6, p. 645-650 6 p.

  研究成果: Article › 査読

  Open Access

  • PEEK 100%
  • Polyether ether ketones 94%
  • energy absorption 76%
  • Energy absorption 73%
  • tubes 48%
  3 被引用数 (Scopus)

• Effect of the interfacial nanostructure on the interlaminar fracture toughness and damage mechanisms of directly bonded carbon fiber reinforced thermoplastics and aluminum

  Ota, H., Jespersen, K. M., Saito, K., Wada, K., Okamoto, K., Hosoi, A. & Kawada, H., 2020 12月, In: Composites Part A: Applied Science and Manufacturing. 139, 106101.

  研究成果: Article › 査読

  • Nanostructures 100%
  • Fracture Toughness 92%
  • Thermoplastics 82%
  • Carbon fibers 76%
  • Carbon Fiber 74%
  11 被引用数 (Scopus)

• Effect of water absorption on interaction between matrix cracking and fiber bridging for stress corrosion cracking of PMC

  Kobiki, A. & Kawada, H., 2006 4月 15, In: JSME International Journal, Series A: Solid Mechanics and Material Engineering. 48, 4, p. 183-188 6 p.

  研究成果: Article › 査読

  • Polymer matrix composites 100%
  • Stress Corrosion Cracking 99%
  • Reinforced Plastic 92%
  • Water absorption 87%
  • Debonding 84%
  2 被引用数 (Scopus)

• Effects of stacking sequence on static torsional properties of CFRP pipes

  Watanabe, T., Satomura, K., Kimoto, N., Nakamura, T., Kim, T. S., Hosoi, A. & Kawada, H., 2016 8月, In: Zairyo/Journal of the Society of Materials Science, Japan. 65, 8, p. 567-572 6 p.

  研究成果: Article › 査読

  • Plastic pipe 100%
  • carbon fiber reinforced plastics 93%
  • Reinforced Plastic 85%
  • Delamination 83%
  • Carbon fiber reinforced plastics 76%
  2 被引用数 (Scopus)

• Effects of Thickness and Specimen Size on Fracture Toughness of Glass/Epoxy Laminates

  Kawada, H. & Otsuka, T., 1985 1月 1, In: Journal of the Society of Materials Science, Japan. 34, 377, p. 164-170 7 p.

  研究成果: Article › 査読

  Open Access

  • Electric Potential 100%
  • Fracture Toughness 85%
  • fracture strength 75%
  • laminates 70%
  • Laminates 68%

• Energy absorbing characteristics of GF/Nylon tubes - effect of trigger geometry and testing speed on energy absorption

  Kawada, H., Honda, T., Takashima, M. & Satoh, H., 1998 5月, In: Zairyo/Journal of the Society of Materials Science, Japan. 47, 5, p. 458-463 6 p.

  研究成果: Article › 査読

  • Nylon (trademark) 100%
  • energy absorption 95%
  • Nylon 91%
  • Energy absorption 91%
  • Debris 90%

• Evaluating the fracture toughness of glass fiber/epoxy interface using slice compression test: Propagation behavior of interfacial debonding

  Tsay, K. N., Toge, K. & Kawada, H., 2002 1月 1, In: Advanced Composite Materials. 11, 1, p. 1-9 9 p.

  研究成果: Article › 査読

  • Fracture Toughness 100%
  • Debonding 99%
  • Glass fibers 87%
  • Fracture toughness 79%
  • Glass 61%
  2 被引用数 (Scopus)

• Evaluating the impact tensile properties of unidirectional fibre-reinforced composites with thermoplastic epoxy resin

  Taniguchi, N., Nishiwaki, T., Hirayama, N., Nishida, H. & Kawada, H., 2009 10月, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 75, 758, p. 1284-1289 6 p.

  研究成果: Article › 査読

  Open Access

  • Epoxy resins 83%
  • Tensile properties 79%
  • Thermoplastics 78%
  • Epoxy Resin 76%
  • Strain rate 71%
  7 被引用数 (Scopus)

• Evaluating the mechanical properties of a CFRP tube under a lateral impact load using the split Hopkinson bar

  Taniguchi, N., Nishiwaki, T. & Kawada, H., 2005, In: Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials. 14, 3, p. 263-276 14 p.

  研究成果: Article › 査読

  • Carbon fiber reinforced plastics 100%
  • Wave 85%
  • Displacement 75%
  • Crack Propagation 64%
  • Mechanical properties 59%
  5 被引用数 (Scopus)

• Evaluation of Fracture Toughness in C/C Composite under Four-Point Bending (Difference in Fabrication Method and Fracture Mechanism)

  Kawada, H., Matsumori, M., Omata, H., Uruno, T., Hiramoto, J. & Hayashi, I., 1994, In: Transactions of the Japan Society of Mechanical Engineers Series A. 60, 572, p. 978-983 6 p.

  研究成果: Article › 査読

  Open Access

  • Fracture Toughness 100%
  • Fracture toughness 79%
  • Bending Strength 72%
  • Fabrication 65%
  • Bending strength 57%
  1 被引用数 (Scopus)

• Evaluation of initiation of the interfacial debonding in single fiber composite (Energy balance method considering an energy dissipation of the plastic deformation)

  Kimura, S., Koyanagi, J. & Kawada, H., 2006, In: JSME International Journal, Series A: Solid Mechanics and Material Engineering. 49, 3, p. 451-457 7 p.

  研究成果: Article › 査読

  • Energy Balance 100%
  • Plastic Deformation 89%
  • Interfacial energy 88%
  • Debonding 80%
  • Dissipation 78%
  13 被引用数 (Scopus)

• Evaluation of In-Plane Mode II Fracture Toughness in Unidirectional GFRP Using Four-Point Shear Loading Test (Revised Method and Dependence of the Pre-Crack Length)

  Kawada, H., Shimanuki, H., Omata, H. & Hayashi, I., 1993, In: Journal of the Society of Materials Science, Japan. 42, 478, p. 817-822 6 p.

  研究成果: Article › 査読

  • Fracture Toughness 100%
  • fracture strength 88%
  • Shear 81%
  • Fracture toughness 79%
  • cracks 68%

• Evaluation of In-Plane Mode II Fracture Toughness Tests in Unidirectional GFRP — Fracture Simulation Using FEM —

  Kawada, H. & Hayashi, I., 1995, In: Journal of the Society of Materials Science, Japan. 44, 499, p. 470-476 7 p.

  研究成果: Article › 査読

  Open Access

  • Fracture Toughness 100%
  • fracture strength 88%
  • Fracture toughness 79%
  • evaluation 56%
  • Simulation 56%
  2 被引用数 (Scopus)

• Evaluation of mechanical properties of untwisted carbon nanotube yarn for application to composite materials

  Sugano, K., Kurata, M. & Kawada, H., 2014 11月, In: Carbon. 78, p. 356-365 10 p.

  研究成果: Article › 査読

  • Carbon nanotubes 100%
  • Yarn 95%
  • Carbon Nanotube 68%
  • Mechanical properties 61%
  • Composite materials 54%
  39 被引用数 (Scopus)

• Evaluation of Mode II Fracture Toughness in Glass Cloth/Epoxy Laminates by Rail-Shear Test Method

  Kawada, H., Hayashi, I., Aoki, T. & Kondoh, M., 1988, In: Zairyo/Journal of the Society of Materials Science, Japan. 37, 417, p. 683-689 7 p.

  研究成果: Article › 査読

  Open Access

  • rails 100%
  • Fracture Toughness 94%
  • fracture strength 83%
  • laminates 78%
  • Laminates 76%

• Evaluation of Mode II Fracture Toughness in Unidirectional GFRP Using Four-Point Shear Loading Test and Its Fracture Mechanism

  Kawada, H., Hayashi, I., Ochi, Y. & Shimanuki, H., 1991, In: Zairyo/Journal of the Society of Materials Science, Japan. 40, 454, p. 875-881 7 p.

  研究成果: Article › 査読

  Open Access

  • Fracture Toughness 100%
  • fracture strength 88%
  • Shear 81%
  • Fracture toughness 79%
  • shear 60%

• Evaluation of strength degradation behavior and fatigue life prediction of plain-woven carbon-fiber-reinforced plastic laminates immersed in seawater

  Koshima, S., Yoneda, S., Kajii, N., Hosoi, A. & Kawada, H., 2019 12月, In: Composites Part A: Applied Science and Manufacturing. 127, 105645.

  研究成果: Article › 査読

  • Laminated Plastic 100%
  • Fatigue Strength 93%
  • Plastic laminates 83%
  • Seawater 62%
  • Carbon fiber reinforced plastics 61%
  9 被引用数 (Scopus)

• Evaluation of the interfacial properties in polymer matrix composite: Experiments and elasto-plastic shear-lag analysis

  Kimura, S., Koyanagi, J., Hama, T. & Kawada, H., 2007 1月 1, In: Key Engineering Materials. 340-341 I, p. 167-172 6 p.

  研究成果: Article › 査読

  • Polymer matrix composites 100%
  • Reinforced Plastic 92%
  • Laser spectroscopy 79%
  • Raman spectroscopy 67%
  • Laser Raman Spectroscopy 67%
  2 被引用数 (Scopus)

• Evaluation of transverse crack initiation in cross-ply CFRP laminates under fatigue loading

  Takamura, K., Hosoi, A., Sato, N. & Kawada, H., 2011, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 77, 779, p. 1123-1134 12 p.

  研究成果: Article › 査読

  • Crack Initiation 100%
  • Carbon fiber reinforced plastics 70%
  • Crack initiation 63%
  • Laminates 58%
  • Fatigue Limit 47%
  3 被引用数 (Scopus)

• Evaluation of very high cycle fatigue properties for transverse crack initiation in cross-ply carbon fiber-reinforced plastic laminates

  Miyakoshi, T., Atsumi, T., Kosugi, K., Hosoi, A., Tsuda, T. & Kawada, H., 2022 8月, In: Fatigue and Fracture of Engineering Materials and Structures. 45, 8, p. 2403-2414 12 p.

  研究成果: Article › 査読

  • Laminated Plastic 100%
  • Crack Initiation 87%
  • Plastic laminates 83%
  • Reinforced Plastic 69%
  • Carbon fiber reinforced plastics 61%

• Experimental characterization of dynamic tensile strength in unidirectional carbon/epoxy composites

  Taniguchi, N., Nishiwaki, T. & Kawada, H., 2008 6月 1, In: Advanced Composite Materials. 17, 2, p. 139-156 18 p.

  研究成果: Article › 査読

  • Strain rate 100%
  • Tensile Strength 92%
  • Tensile strength 86%
  • Carbon 82%
  • Strain 75%
  8 被引用数 (Scopus)

• Experimental evaluation of mode I fracture toughness of dissimilar-material joints with thermal residual stresses

  Harada, K., Jespersen, K. M., Shima, M., Hosoi, A. & Kawada, H., 2022 6月 16, In: Composites Science and Technology. 224, 109459.

  研究成果: Article › 査読

  • Residual Stress 100%
  • Dissimilar materials 99%
  • Fracture Toughness 84%
  • Thermal stress 74%
  • Cantilever Beam 72%
  1 被引用数 (Scopus)

• Experimental measurement of mode-I fracture toughness of dissimilar material joints with thermal residual stresses

  Jespersen, K. M., Ota, H., Harada, K., Hosoi, A. & Kawada, H., 2020 10月 15, In: Engineering Fracture Mechanics. 238, 107249.

  研究成果: Article › 査読

  • Residual Stress 100%
  • Dissimilar materials 99%
  • Fracture Toughness 84%
  • Thermal stress 74%
  • Fracture toughness 67%
  5 被引用数 (Scopus)

• Experimental study on impact tensile property of glass fiber

  Taniguchi, N., Arao, Y., Nishiwaki, T., Hirayama, N., Nakamura, K. & Kawada, H., 2012, In: Advanced Composite Materials. 21, 2, p. 165-175 11 p.

  研究成果: Article › 査読

  • Tensile properties 100%
  • Glass fibers 95%
  • Strain rate 90%
  • Strain 68%
  • Glass 67%
  8 被引用数 (Scopus)

• Ex-situ X-ray computed tomography, tension clamp and in-situ transilluminated white light imaging data of non-crimp fabric based fibre composite under fatigue loading

  Jespersen, K. M., Glud, J. A., Zangenberg, J., Hosoi, A., Kawada, H. & Mikkelsen, L. P., 2018 12月, In: Data in Brief. 21, p. 228-233 6 p.

  研究成果: Article › 査読

  Open Access

  • clamps 100%
  • fiber composites 95%
  • tomography 65%
  • bundles 54%
  • fibers 46%
  6 被引用数 (Scopus)

• Fatigue behaviour of alumina-fibre-reinforced epoxy resin composite pipes under tensile and compressive loading conditions

  Srivastava, V. K. & Kawada, H., 2001 12月, In: Composites Science and Technology. 61, 16, p. 2393-2403 11 p.

  研究成果: Article › 査読

  • Epoxy resins 100%
  • Alumina 92%
  • Epoxy Resin 91%
  • Pipe 70%
  • Fatigue of materials 64%
  16 被引用数 (Scopus)

• Fatigue characteristics of quasi-isotropic CFRP laminates subjected to variable amplitude cyclic two-stage loading

  Hosoi, A., Kawada, H. & Yoshino, H., 2006 10月, In: International Journal of Fatigue. 28, 10 SPEC. ISS., p. 1284-1289 6 p.

  研究成果: Article › 査読

  • Cumulative Damage 100%
  • Fatigue 84%
  • Laminates 83%
  • Carbon fiber reinforced plastics 67%
  • Laminated Plastic 54%
  39 被引用数 (Scopus)

• Fatigue damage progress in alumina FRP tubes at cryogenic temperature

  Kawada, H., Yanase, Y., Kawamata, A., Shimizu, T., Yamashita, K. & Asano, K., 1999 3月, In: Zairyo/Journal of the Society of Materials Science, Japan. 48, 3, p. 282-288 7 p.

  研究成果: Article › 査読

  Open Access

  • Complex Modulus 100%
  • Cryogenics 70%
  • cryogenic temperature 68%
  • Fatigue damage 67%
  • Alumina 62%
  1 被引用数 (Scopus)