年別の研究成果
年別の研究成果
フィンガープリント
Kosei Ishidaが活動している研究トピックを掘り下げます。このトピックラベルは、この研究者の研究成果に基づきます。これらがまとまってユニークなフィンガープリントを構成します。
- 1 類似のプロファイル
ネットワーク
国/地域レベルにおける最近の外部共同研究。点をクリックして詳細を開くか、または
-
Accuracy and Generality of Trained Models for Lift Planning Using Deep Reinforcement Learning-Optimization of the Crane Hook Movement between Two Points
Tarutani, A. & Ishida, K., 2020, Proceedings of the 37th International Symposium on Automation and Robotics in Construction, ISARC 2020: From Demonstration to Practical Use - To New Stage of Construction Robot. International Association on Automation and Robotics in Construction (IAARC), p. 538-546 9 p. (Proceedings of the 37th International Symposium on Automation and Robotics in Construction, ISARC 2020: From Demonstration to Practical Use - To New Stage of Construction Robot).研究成果: Conference contribution
-
Evaluation of drainage gradient using three-dimensional measurement data and physics engine
Ishida, K., 2020, Proceedings of the 37th International Symposium on Automation and Robotics in Construction, ISARC 2020: From Demonstration to Practical Use - To New Stage of Construction Robot. International Association on Automation and Robotics in Construction (IAARC), p. 1219-1226 8 p. (Proceedings of the 37th International Symposium on Automation and Robotics in Construction, ISARC 2020: From Demonstration to Practical Use - To New Stage of Construction Robot).研究成果: Conference contribution
-
Investigating the accuracy of 3D models created using SfM
Ishida, K., 2017, p. 834-839. 6 p.研究成果: Paper › 査読
3 被引用数 (Scopus) -
Construction progress management and interior work analysis using kinect 3D image sensors
Ishida, K., 2016, p. 314-322. 9 p.研究成果: Paper › 査読
Open Access2 被引用数 (Scopus) -
A study on measuring of reinforced-concrete structure by 3D laser scanner and making design of pre-cut interior finishing components with polygon model
Ishida, K., Kano, N., Igarashi, T., Fujii, H., Oosawa, Y., Sakamoto, S. & Tomita, H., 2013, p. 1208-1215. 8 p.研究成果: Paper › 査読
Open Access1 被引用数 (Scopus)