吉田 誠

研究成果

年別の研究成果 1993 2000 2002 2007 2013 2016 2017 2018 2022

• 960 被引用数
• 15 h-index
• 111 Article
• 21 Conference contribution
• 4 Conference article

年別の研究成果

年別の研究成果

検索結果

• Article

  Effect of creep and cyclic loading on pulsating fatigue behavior for various ti alloys under stress ratio R = 0

  Nagatani, G. I., Kitazawa, R., Yoshida, M. & Horibe, S., 2013 10月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 10, p. 455-460 6 p.

  研究成果: Article › 査読

  • stress ratio 100%
  • Creep 86%
  • Alloy 49%
  • Fatigue of materials 48%
  • damage 39%
  1 被引用数 (Scopus)

• Effect of grain refiner and grain size on the susceptibility of Al-Mg die casting alloy to cracking during solidification

  Kimura, R., Hatayama, H., Shinozaki, K., Murashima, I., Asada, J. & Yoshida, M., 2009 1月 1, In: Journal of Materials Processing Technology. 209, 1, p. 210-219 10 p.

  研究成果: Article › 査読

  • Die casting 100%
  • Solidification 89%
  • Grain Size 76%
  • Casting 72%
  • Alloy 56%
  39 被引用数 (Scopus)

• Effect of hydrogen in molten aluminum on the growth of micro-porosity and mechanical properties of squeeze cast material

  Yoshida, M., Taki, K. & Fukunaga, H., 2000, In: Keikinzoku/Journal of Japan Institute of Light Metals. 50, 7, p. 325-329 5 p.

  研究成果: Article › 査読

  Open Access

  • Microporosity 100%
  • Molten materials 65%
  • Micro Porosity 60%
  • Hydrogen 53%
  • Aluminum 51%
  4 被引用数 (Scopus)

• Effect of interfacial reaction on bending strength of Al₁₈B₄O₃₃ whisker-reinforced aluminum composites

  Yao, L. J., Sasaki, G., Pan, J., Yoshida, M. & Fukunaga, H., 1998, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 29, 5, p. 1517-1524 8 p.

  研究成果: Article › 査読

  • Surface chemistry 100%
  • Bending Strength 93%
  • flexural strength 85%
  • Bending strength 73%
  • Surface Chemistry 69%
  10 被引用数 (Scopus)

• Effect of lamination structures on impact properties of Al₁₈B₄O_33w/ Al and aluminum laminate composites

  Lee, S. P., Yoshida, M., Sasaki, G. & Fukunaga, H., 1998 5月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 48, 5, p. 232-236 5 p.

  研究成果: Article › 査読

  Open Access

  • Lamination 100%
  • Aluminum sheet 97%
  • Laminates 67%
  • Aluminum 57%
  • Composite materials 43%

• Effect of magnesium content on tensile strength of carbon-fiber-reinforced aluminum-magnesium alloy composite wires fabricated by ultrasonic infiltration method

  Matsunaga, T., Matsuda, K., Hatayama, T., Shinozaki, K., Amanuma, S. & Yoshida, M., 2006 2月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 56, 2, p. 105-111 7 p.

  研究成果: Article › 査読

  • Infiltration 100%
  • Magnesium 90%
  • Magnesium alloys 90%
  • Carbon fibers 80%
  • Aluminum alloys 74%
  4 被引用数 (Scopus)

• Effect of Mn addition on the age-hardening behavior of an Al-(9-10)%Si-0.3%Mg die casting alloy in T5 and T6 heat treatment

  Fukasawa, K., Mohri, R., Ohtake, T., Inoue, T., Kuroda, A., Kambe, H. & Yoshida, M., 2016, In: Materials Transactions. 57, 6, p. 959-965 7 p.

  研究成果: Article › 査読

  • Age hardening 100%
  • Die casting 95%
  • precipitation hardening 93%
  • Casting 69%
  • Heat treatment 67%
  5 被引用数 (Scopus)

• Effect of powder lubricants on surface quality of aluminum alloy die-castings

  Yae, H., Kimura, R., Yosida, M., Sasaki, G., Pan, J., Yokoyama, K. & Fukunaga, H., 2002 7月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 52, 7, p. 303-307 5 p.

  研究成果: Article › 査読

  Open Access

  • Die castings 100%
  • Aluminium Alloy 72%
  • Surface properties 66%
  • Lubricants 63%
  • Aluminum alloys 57%
  3 被引用数 (Scopus)

• Effect of pre-aging conditions on T5 heat treatment behavior of Al-9%Si-0.3%Mg die-casting alloy

  Inoue, T., Goto, M., Yamaguchi, A., Otake, T., Kuroda, A. & Yoshida, M., 2011, In: Keikinzoku/Journal of Japan Institute of Light Metals. 61, 10, p. 507-512 6 p.

  研究成果: Article › 査読

  Open Access

  • Die casting 100%
  • Heat treatment 70%
  • Heat Treatment 68%
  • Aging of materials 65%
  • Alloy 56%
  4 被引用数 (Scopus)

• Effect of Sand Mold Constraint on Warpage Deformation of Lamellar Graphite Gray Cast Iron and Prediction by Elastoplastic-Creep Finite Element Analysis

  Khairi Faiz, M., Uehara, K., Nakajima, T., Kanno, T., Hiramoto, Y., Miyashita, T., Okane, T. & Yoshida, M., 2021 6月, In: Journal of Materials Engineering and Performance. 30, 6, p. 4669-4680 12 p.

  研究成果: Article › 査読

  • Cast iron 100%
  • Graphite 93%
  • Casting 84%
  • Sand 83%
  • Creep 80%

• Effect of sand mold models on the simulated mold restraint force and the contraction of the casting during cooling in green sand molds

  Inoue, Y., Motoyama, Y., Takahashi, H., Shinji, K. & Yoshida, M., 2013, In: Journal of Materials Processing Technology. 213, 7, p. 1157-1165 9 p.

  研究成果: Article › 査読

  • Molds 100%
  • Yield Point 82%
  • Casting 76%
  • Sand 76%
  • Cooling 75%
  15 被引用数 (Scopus)

• Effect of stacking fault energy on pulsating fatigue behavior for fcc metals under the fully repeated loading

  Sakaki, S., Yoshida, M. & Horibe, S., 2014 6月 23, In: Materials Science and Engineering A. 607, p. 1-5 5 p.

  研究成果: Article › 査読

  • Stacking Fault Energy 100%
  • Stacking faults 83%
  • stacking fault energy 71%
  • Face-Centered Cubic Crystal System 62%
  • Fatigue damage 61%
  1 被引用数 (Scopus)

• Effect of temperature field and mechanical properties of casting on prediction of hot tearing tendency using FEM thermal stress analysis⁺1

  Takai, R., Tsunoda, T., Kawada, Y., Hirohara, R., Okane, T. & Yoshida, M., 2018, In: Materials Transactions. 59, 8, p. 1333-1340 8 p.

  研究成果: Article › 査読

  • tearing 100%
  • stress analysis 93%
  • thermal stresses 82%
  • Stress analysis 79%
  • Thermal stress 77%
  6 被引用数 (Scopus)

• Effect of Thermal Residual Stress on Matrix Cracking Strain and Fracture Behavior of the Sintered SiC Fiber Reinforced SiO₂-Mullite Composites

  Nagahisa, K., Iwamoto, K., Shinozaki, K., Sasaki, G., Enoki, M. & Yoshida, M., 2004 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 68, 2, p. 172-180 9 p.

  研究成果: Article › 査読

  Open Access

  • Mullite 100%
  • Residual Stress 97%
  • mullites 92%
  • thermal stresses 77%
  • Thermal stress 72%
  1 被引用数 (Scopus)

• Effect of twinning and aging treatment on fatigue process of ZK60 magnesium alloys

  Taniguchi, S., Kitazawa, R., Tanaka, Y., Yoshida, M. & Horibe, S., 2013 10月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 10, p. 448-454 7 p.

  研究成果: Article › 査読

  • Twinning 100%
  • Magnesium Alloy 90%
  • magnesium alloys 85%
  • twinning 81%
  • Magnesium alloys 80%

• Effect of water cooling conditions on splash break occurance during aluminum DC casting

  Morishita, M., Abe, M. & Yoshida, M., 2010, In: Keikinzoku/Journal of Japan Institute of Light Metals. 60, 8, p. 379-385 7 p.

  研究成果: Article › 査読

  • Cooling Water 100%
  • Cooling water 79%
  • Casting 64%
  • Aluminum 55%
  • Heat flux 36%

• Effect of whisker surface treatment on the strength of Al₁₈B₄O₃₃/Al alloy composites

  Pan, J., Lee, S. P., Yoshida, M., Sasaki, G., Fuyama, N., Fujii, T. & Fukunaga, H., 2001 12月 1, In: Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials. 10, 4, p. 299-307 9 p.

  研究成果: Article › 査読

  • Magnesium 100%
  • Surface treatment 99%
  • Surface chemistry 74%
  • Coatings 70%
  • Alloy 65%
  6 被引用数 (Scopus)

• Effects of Recovery Behavior and Strain-Rate Dependence of Stress–Strain Curve on Prediction Accuracy of Thermal Stress Analysis During Casting

  Motoyama, Y., Shiga, H., Sato, T., Kambe, H. & Yoshida, M., 2017 3月 13, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-11 11 p.

  研究成果: Article › 査読

  • stress analysis 100%
  • thermal stresses 88%
  • Stress analysis 84%
  • Thermal stress 82%
  • Strain rate 76%
  2 被引用数 (Scopus)

• Effects of roughness pitch of surfaces on their wettability

  Nakae, H., Yoshida, M. & Yokota, M., 2005 5月, In: Journal of Materials Science. 40, 9-10, p. 2287-2293 7 p.

  研究成果: Article › 査読

  • Wetting 100%
  • Surface roughness 81%
  • Surface Roughness 78%
  • Rod Like Crystal 36%
  • Surface 31%
  32 被引用数 (Scopus)

• Elasto-Plastic-Creep Constitutive Equation of an Al-Si-Cu High-Pressure Die Casting Alloy for Thermal Stress Analysis

  Motoyama, Y., Shiga, H., Sato, T., Kambe, H. & Yoshida, M., 2016 11月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 11, p. 5598-5608 11 p.

  研究成果: Article › 査読

  • Die casting 100%
  • stress analysis 97%
  • Constitutive equations 88%
  • thermal stresses 86%
  • constitutive equations 85%
  5 被引用数 (Scopus)

• Evaluation of Ejection Force for Die Castings by FEM Thermal Stress Analysis with Elasto-Plastic-Creep Model

  Ueda, S., Sannakanishi, S., Shiga, H., Faiz, M. K. & Yoshida, M., 2022, In: Materials Transactions. 63, 2, p. 217-223 7 p.

  研究成果: Article › 査読

  Open Access

  • Die castings 100%
  • stress analysis 80%
  • thermal stresses 70%
  • ejection 69%
  • Stress analysis 67%

• Evaluation of solidification cracking susceptibility of heat-resistant magnesium alloy produced by semi-solid injection molding process

  Fujii, T., Yamamoto, M., Shinozaki, K., Misawa, R., Nagai, A., Yoshida, M. & Tanaka, T., 2013, In: Keikinzoku/Journal of Japan Institute of Light Metals. 63, 6, p. 223-228 6 p.

  研究成果: Article › 査読

  • Magnesium Alloy 100%
  • Solidification 92%
  • Superalloys 89%
  • Magnesium alloys 88%
  • Injection molding 85%
  1 被引用数 (Scopus)

• Experimental and numerical analysis of grain refinement effect on hot tearing susceptibility for Al–Mg alloys

  Takai, R., Endo, N., Hirohara, R., Tsunoda, T. & Yoshida, M., 2018 1月 1, (Accepted/In press) In: International Journal of Advanced Manufacturing Technology.

  研究成果: Article › 査読

  • Grain refinement 100%
  • Numerical analysis 72%
  • Creep 72%
  • Solidification 61%
  • Thermal stress 20%
  7 被引用数 (Scopus)

• Fabrication and oxidation behavior of sintered SiC fiber reinforced SiO₂-mullite composite with BN interphase

  Nagahisa, K., Shimojo, Y., Sasaki, G. & Yoshida, M., 2007 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 71, 2, p. 275-283 9 p.

  研究成果: Article › 査読

  • Mullite 100%
  • mullites 92%
  • Oxidation 64%
  • Fabrication 54%
  • oxidation 53%

• Fabrication conditions and microstructures of Al₁₈B₄O₃₃/AZ91D magnesium alloy composites by compo-casting

  Sasaki, G., Hara, S., Yoshida, M., Fuyama, N. & Fujii, T., 2002 5月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 52, 5, p. 216-220 5 p.

  研究成果: Article › 査読

  Open Access

  • Magnesium Alloy 100%
  • Magnesium alloys 88%
  • Casting 72%
  • Reinforcement 67%
  • Fabrication 62%
  3 被引用数 (Scopus)

• Fabrication of aluminum borate whisker reinforced AZ91D magnesium alloy composites by semi-solid process and their mechanical properties

  Yoshida, M., Takeuchi, S., Pan, J., Sasaki, G., Fuyama, N., Fujii, T. & Fukunaga, H., 2001 1月 1, In: Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials. 10, 2-3, p. 255-263 9 p.

  研究成果: Article › 査読

  • Borates 100%
  • Magnesium Alloy 81%
  • Magnesium alloys 72%
  • Borate 65%
  • Aluminum 53%
  4 被引用数 (Scopus)

• Fabrication of continuous carbon fiber-reinforced aluminum-magnesium alloy composite wires using ultrasonic infiltration method

  Matsunaga, T., Matsuda, K., Hatayama, T., Shinozaki, K. & Yoshida, M., 2007 8月 1, In: Composites Part A: Applied Science and Manufacturing. 38, 8, p. 1902-1911 10 p.

  研究成果: Article › 査読

  • Infiltration 100%
  • Magnesium alloys 90%
  • Carbon fibers 80%
  • Aluminum alloys 74%
  • Ultrasonics 73%
  73 被引用数 (Scopus)

• Fabrication Process and Evaluation of the Sintered SiC Fiber Reinforced SiO₂-Mullite Composites

  Nagahisa, K., Iwamoto, K., Shinozaki, K., Fukunaga, H., Sasaki, G. & Yoshida, M., 2004 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 68, 2, p. 162-171 10 p.

  研究成果: Article › 査読

  Open Access

  • Mullite 100%
  • mullites 92%
  • Fabrication 54%
  • Fibers 50%
  • evaluation 46%
  2 被引用数 (Scopus)

• Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting

  Uozumi, H., Kobayashi, K., Nakanishi, K., Matsunaga, T., Shinozaki, K., Sakamoto, H., Tsukada, T., Masuda, C. & Yoshida, M., 2008 11月 15, In: Materials Science and Engineering A. 495, 1-2, p. 282-287 6 p.

  研究成果: Article › 査読

  • squeeze casting 100%
  • Light metals 95%
  • Squeeze casting 91%
  • Metal Matrix Composites 80%
  • metal matrix composites 78%
  126 被引用数 (Scopus)

• Formation behavior of acoustic cavitation in molten aluminum alloys under ultrasonic vibration

  Matsunaga, T., Ogata, K., Hatayama, T., Shinozaki, K. & Yoshida, M., 2006 4月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 56, 4, p. 214-220 7 p.

  研究成果: Article › 査読

  • Cavitation 100%
  • Aluminium Alloy 87%
  • Molten materials 77%
  • Aluminum alloys 69%
  • Ultrasonics 67%
  2 被引用数 (Scopus)

• Grain refinement effects on the strain rate sensitivity and grain boundary sliding in partially solidified Al-5 wt%Mg alloy

  Takai, R., Kimura, S., Kashiuchi, R., Kotaki, H. & Yoshida, M., 2016 6月 14, In: Materials Science and Engineering A. 667, p. 417-425 9 p.

  研究成果: Article › 査読

  • Grain boundary sliding 100%
  • Grain Refinement 95%
  • Grain refinement 80%
  • Grain Boundary 70%
  • sliding 63%
  23 被引用数 (Scopus)

• Hot tearing prediction of casting via thermal stress analysis

  Takai, R. & Yoshida, M., 2019, In: Keikinzoku/Journal of Japan Institute of Light Metals. 69, 8, p. 400-409 10 p.

  研究成果: Article › 査読

  Open Access

• Hot tearing susceptibility of aluminum and magnesium alloys during casting (Part 1)

  Takai, R., Otaki, M. & Yoshida, M., 2018, In: Keikinzoku/Journal of Japan Institute of Light Metals. 68, 1, p. 23-32 10 p.

  研究成果: Article › 査読

  Open Access

• Hot tearing susceptibility of aluminum and magnesium alloys during casting (Part 2)

  Takai, R., Otaki, M. & Yoshida, M., 2018, In: Keikinzoku/Journal of Japan Institute of Light Metals. 68, 2, p. 79-90 12 p.

  研究成果: Article › 査読

  Open Access

• HREM and EDS analysis of sintered SiC fibre reinforced MAS glass composites

  Nagahisa, K., Yoshida, M., Abe, E., Fukunaga, H. & Sasaki, G., 2002 7月 10, In: Journal of Electron Microscopy. 51, SUPPL., p. S159-S164

  研究成果: Article › 査読

  • aluminum magnesium silicate 100%
  • High resolution electron microscopy 92%
  • Aluminosilicates 77%
  • Magnesium 57%
  • Energy dispersive spectroscopy 56%
  1 被引用数 (Scopus)

• Image-based modeling of viscoelastic properties of solidifying Al alloys and model validation

  Matsushita, A., Mizuno, H., Okane, T. & Yoshida, M., 2019 1月 1, In: Journal of Materials Processing Technology. 263, p. 321-329 9 p.

  研究成果: Article › 査読

  • Brittle Temperature 100%
  • Alloy 66%
  • Tensile testing 54%
  • Solidification 52%
  • Rheology 42%
  5 被引用数 (Scopus)

• Infiltration mechanism of molten aluminum alloys into bundle of carbon fibers using ultrasonic infiltration method

  Matsunaga, T., Ogata, K., Hatayama, T., Shinozaki, K. & Yoshida, M., 2006 4月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 56, 4, p. 226-232 7 p.

  研究成果: Article › 査読

  • Cavitation 100%
  • Infiltration 92%
  • Aluminium Alloy 87%
  • Molten materials 77%
  • Carbon fibers 74%
  7 被引用数 (Scopus)

• Influence of abnormal structure on the reliability of squeeze castings

  Kimura, R., Yoshida, M., Sasaki, G., Pan, J. & Fukunaga, H., 2002 12月 20, In: Journal of Materials Processing Technology. 130-131, p. 299-303 5 p.

  研究成果: Article › 査読

  • Squeeze casting 100%
  • Lubricants 67%
  • Casting 63%
  • Elongation 52%
  • Heat Transfer 50%
  26 被引用数 (Scopus)

• Influence of compressive pre-strain on tensile fatigue life in carbon steel S45C

  Tamaki, H., Kitazawa, R., Yoshida, M. & Horibe, S., 2013 11月 1, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 11, p. 503-508 6 p.

  研究成果: Article › 査読

  • fatigue life 100%
  • carbon steels 89%
  • Carbon steel 69%
  • Strain 52%
  • Fatigue of materials 51%

• Influence of gravity on the microstructure of directionally solidified Ag-Si eutectic alloy

  Aoi, I., Yoshida, M., Fukunaga, H. & Nakae, H., 1999 1月, In: Materials Transactions, JIM. 40, 1, p. 27-33 7 p.

  研究成果: Article › 査読

  Open Access

  • eutectic alloys 100%
  • Gravity 89%
  • Eutectics 82%
  • eutectics 75%
  • Gravitation 69%
  4 被引用数 (Scopus)

• Influence of gravity on the microstructure of directionally solidified Al-In monotectic alloy

  Yoshida, M., Murao, S., Aoi, I. & Nakae, H., 1998, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 62, 1, p. 85-91 7 p.

  研究成果: Article › 査読

  Open Access

  • monotectic alloys 100%
  • Gravity 68%
  • Gravitation 52%
  • Liquid-Solid Interface 46%
  • gravitation 44%
  6 被引用数 (Scopus)

• Influence of growth direction on the microstructure of unidirectionally solidified Cu-Pb monotectic alloy using zone-melt technique

  Aoi, I., Ishino, M., Yoshida, M., Fukunaga, H. & Nakae, H., 2001 2月, In: Journal of Crystal Growth. 222, 4, p. 806-815 10 p.

  研究成果: Article › 査読

  • monotectic alloys 100%
  • Solidification 65%
  • solidification 54%
  • Gravity 51%
  • Alloy 41%
  20 被引用数 (Scopus)

• Influence of high temperature holding on tensile strength of pan-based carbon fiber reinforced aluminum-magnesium alloy composites fabricated by ultrasonic infiltration method

  Yamaguchi, S., Mikuni, J., Mizoguchi, I., Matsunaga, T., Shinozaki, K. & Yoshida, M., 2009 5月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 59, 5, p. 241-247 7 p.

  研究成果: Article › 査読

  • Infiltration 100%
  • Magnesium alloys 90%
  • Aluminium Alloy 80%
  • Carbon fibers 80%
  • Carbon Fiber 78%
  1 被引用数 (Scopus)

• Influence of high temperature holding on tensile strength of pitch-based carbon fiber reinforced Al-Mg alloy composites fabricated by ultrasonic infiltration method

  Mizoguchi, I., Yamaguchi, S., Yachi, S. & Yoshida, M., 2010, In: Keikinzoku/Journal of Japan Institute of Light Metals. 60, 8, p. 396-402 7 p.

  研究成果: Article › 査読

  • Infiltration 100%
  • Carbon fibers 80%
  • Carbon Fiber 78%
  • Ultrasonics 73%
  • Tensile Strength 72%
  2 被引用数 (Scopus)

• Influence of interfacial chemical reaction for tensile strength of carbon fiber reinforced aluminum-magnesium alloy composites fabricated by ultrasonic infiltration method

  Mikuni, J., Nonokawa, K., Matsunaga, T., Shinozaki, K. & Yoshida, M., 2008 1月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 58, 1, p. 27-32 6 p.

  研究成果: Article › 査読

  • Infiltration 100%
  • Magnesium alloys 90%
  • Chemical reactions 85%
  • Carbon fibers 80%
  • Carbon Fiber 78%
  3 被引用数 (Scopus)

• Influence of laser surface melting condition on intergranular corrosion resistance in type 316 stainless steel

  Muto, K., Furukawa, M., Sakai, J. N. I. & Yoshida, M., 2009 5月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 73, 5, p. 340-345 6 p.

  研究成果: Article › 査読

  Open Access

  • Surface Melting 100%
  • intergranular corrosion 86%
  • Intergranular corrosion 79%
  • corrosion resistance 60%
  • Melting 56%

• Influence of melting temperature on morphology of primary mullite in SiO₂-Al₂O₃ system

  Nakae, H., Nakano, S. & Yoshida, M., 1995, In: Materials Transactions, JIM. 36, 9, p. 1163-1169 7 p.

  研究成果: Article › 査読

  Open Access

  • Mullite 100%
  • mullites 92%
  • Melting point 77%
  • Aluminum oxide 70%
  • Melting Point 60%
  9 被引用数 (Scopus)

• Influence of solid cohesion on viscous properties in Norton law for aluminum alloys during partial solidification

  Nagata, Y., Takai, R., Okane, T., Faiz, M. K. & Yoshida, M., 2022 1月 14, In: Materials Science and Engineering A. 832, 142339.

  研究成果: Article › 査読

  • Cohesion 100%
  • cohesion 99%
  • Solidification 89%
  • Aluminium Alloy 89%
  • aluminum alloys 75%

• Influence of the factors on thermal conductivity of carbonaceous fiber reinforced aluminum composites

  Uozumi, H., Nakanishi, K., Inoue, K., Tsukada, T., Fuyama, N., Fujii, T. & Yoshida, M., 2009 10月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 59, 10, p. 562-568 7 p.

  研究成果: Article › 査読

  • Thermal Conductivity 100%
  • Thermal conductivity 95%
  • Aluminum 81%
  • Fibers 72%
  • Binders 68%
  1 被引用数 (Scopus)

• Interfaces in Al₁₈B₄O₃₃/Al, Mg alloy composites

  Sasaki, G., Yao, L. J., Yoshida, M., Pan, J. & Fukunaga, H., 1999, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 63, 5, p. 577-580 4 p.

  研究成果: Article › 査読

  Open Access

  • Reaction products 100%
  • Alloy 92%
  • reaction products 84%
  • composite materials 80%
  • Composite materials 76%
  5 被引用数 (Scopus)