Makoto Yoshida

Article

Interfacial microstructure and fracture characterization of Al₁₈B₄O₃₃/Al alloy composites

Sasaki, G., Yoshida, M., Pan, J. & Fukunaga, H., 1999 12月 1, In: Materials Science Research International. 5, 4, p. 276-279 4 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

Interfacial modification and impact properties of Nb/MoSi₂ laminate composites by the addition of ZrO₂, NbSi₂, and SiC particles

Lee, S. P., Yoshida, M. & Fukunaga, H., 2000 1月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 31, 8, p. 2075-2081 7 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

Interfacial reaction and its effect on strength of Al₁₈B₄O₃₃/Al composites

Pan, J., Sasaki, G., Yao, L. J., Yoshida, M. & Fukunaga, H., 1999 9月, In: Materials Science and Technology. 15, 9, p. 1044-1048 5 p.

研究成果: Article › 査読

34 被引用数 (Scopus)

Investigation of the dominating mechanism of fatigue life for various alloys with CSSC on R = O and -1

Komori, A., Watanabe, E., Toda, M., Kitazawa, R., Yoshida, M. & Horibe, S., 2013 8月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 8, p. 295-299 5 p.

研究成果: Article › 査読

Low temperature and low pressure bonding of plateless Cu–Cu substrates by Ag-based transient liquid phase sintering

Muhammad, K. F., Yamamoto, T. & Yoshida, M., 2017 7月 1, In: Journal of Materials Science: Materials in Electronics. 28, 13, p. 9351-9362 12 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Low temperature Cu–Cu bonding by transient liquid phase sintering of mixed Cu nanoparticles and Sn–Bi eutectic powders

Khairi Faiz, M., Bansho, K., Suga, T., Miyashita, T. & Yoshida, M., 2017 11月 1, In: Journal of Materials Science: Materials in Electronics. 28, 21, p. 16433-16443 11 p.

研究成果: Article › 査読

13 被引用数 (Scopus)

Measurement of viscous properties on Al-5mass%Mg alloy in semi-solid state by tensile test with high-frequency induction heating

Nagata, Y., Onizawa, R., Someya, M., Kotaki, H., Takai, R., Ebata, M., Okane, T., Faiz, M. K. & Yoshida, M., 2021 2月 15, In: Keikinzoku/Journal of Japan Institute of Light Metals. 71, 2, p. 112-120 9 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Measuring the interfacial heat transfer coefficient between flowing molten alloy and sand mold using fluidity tests

Motoyama, Y., Tokunaga, H., Yoshida, M., Maruyama, T. & Okane, T., 2020 2月, In: Journal of Materials Processing Technology. 276, 116394.

研究成果: Article › 査読

3 被引用数 (Scopus)

Mechanical Properties of a Partially Solidified Cu-Zn Alloy

Kasuya, N., Nakazawa, T., Matsushita, A., Okane, T. & Yoshida, M., 2016 2月 3, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-7 7 p.

研究成果: Article › 査読

5 被引用数 (Scopus)

Mechanical properties of inconel 718 nickel-Based superalloy around solidus temperature

Ohashi, T., Goto, R., Muto, K. & Yoshida, M., 2012 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 76, 2, p. 148-154 7 p.

研究成果: Article › 査読

3 被引用数 (Scopus)

Metal pipe joining with aluminum alloy by ultrasonic insert casting

Pan, J., Yoshida, M., Sasaki, G. & Fukunaga, H., 2000, In: Materials and Manufacturing Processes. 15, 6, p. 867-881 15 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Modeling of compocasting process and fabrication of AZ91D magnesium alloy matrix composites

Sasaki, G., Yoshida, M., Fuyama, N. & Fujii, T., 2002 12月 20, In: Journal of Materials Processing Technology. 130-131, p. 151-155 5 p.

研究成果: Article › 査読

13 被引用数 (Scopus)

Modeling of microsegregation and precipitation of iron metallic compounds in Al-Fe-Si ternary alloy

Morishita, M., Ishida, H. & Yoshida, M., 2010 4月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 60, 4, p. 157-163 7 p.

研究成果: Article › 査読

5 被引用数 (Scopus)

Numerical and experimental study on residual stress in gray cast iron stress lattice shape casting

Motoyama, Y., Takahashi, H., Okane, T., Fukuda, Y. & Yoshida, M., 2013 3月 13, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 7, p. 3261-3270 10 p.

研究成果: Article › 査読

9 被引用数 (Scopus)

Prediction and experimental validation of cooling rate dependence of viscoplastic properties in a partially solidified state of Al-5mass%Mg alloy

Hirohara, R., Kawada, Y., Takai, R., Otaki, M., Okane, T. & Yoshida, M., 2017, In: Keikinzoku/Journal of Japan Institute of Light Metals. 67, 6, p. 214-221 8 p.

研究成果: Article › 査読

Open Access

Prediction and experimental validation of cooling rate dependence of viscoplastic properties in a partially solidified state of Al-5 mass%Mg Alloy

Hirohara, R., Kawada, Y., Takai, R., Otaki, M., Okane, T. & Yoshida, M., 2017, In: Materials Transactions. 58, 9, p. 1299-1307 9 p.

研究成果: Article › 査読

Open Access

10 被引用数 (Scopus)

Prediction method of crack sensitivity during DC casting of Al-Mn and Al-Mg alloys

Morishita, M., Abe, M., Tokuda, K. & Yoshida, M., 2011 2月, In: Materials Transactions. 52, 2, p. 166-172 7 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Prediction method of crack sensitivity during DC casting of Al-Mn and Al-Mg series aluminum alloys

Morishita, M., Abe, M., Tokuda, K. & Yoshida, M., 2009 8月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 59, 8, p. 417-423 7 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Preparation and characterization of aluminum borate whisker reinforced magnesium alloy composites by semi-solid process

Yoshida, M., Takeuchi, S., Pan, J., Sasaki, G., Fuyama, N., Fuj, T. & Fukunaga, H., 1999 1月 1, In: Advanced Composite Materials. 8, 3, p. 259-268 10 p.

研究成果: Article › 査読

15 被引用数 (Scopus)

Relationship between Masing behavior and dislocation structure of AISI 1025 under different stress ratios in cyclic deformation

Watanabe, E., Asao, T., Toda, M., Yoshida, M. & Horibe, S., 2013 10月, In: Materials Science and Engineering A. 582, p. 55-62 8 p.

研究成果: Article › 査読

2 被引用数 (Scopus)

Rod-lamella transition in directionally solidified Ni-W eutectic alloy

Yoshida, M., Tsujimura, T., Tsukagoshi, T. & Nakae, H., 1996, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 60, 5, p. 482-489 8 p.

研究成果: Article › 査読

Open Access

1 被引用数 (Scopus)

Rod-lamella transition in directionally solidified Ni-W eutectic alloy

Yoshida, M., Tsujimura, T., Kamata, M. & Nakae, H., 1995, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 59, 6, p. 653-659 7 p.

研究成果: Article › 査読

Open Access

2 被引用数 (Scopus)

Separation of AE signals for detecting solidification cracking of Al-7mass%Si alloy by using acoustic emission method

Endo, I., Chiba, H., Ueki, T., Toriyama, T. & Yoshida, M., 2010, In: Keikinzoku/Journal of Japan Institute of Light Metals. 60, 10, p. 492-498 7 p.

研究成果: Article › 査読

Solidification of undercooled Cu, Cu-O and Cu-S alloys

Yoshida, M., Muramatsu, T., Hong, J. F. & Nakae, H., 1996, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 60, 11, p. 1095-1100 6 p.

研究成果: Article › 査読

Open Access

TEM study of the interface of anodic-bonded Si/glass

Xing, Q. F., Yoshida, M. & Sasaki, G., 2002 11月 1, In: Scripta Materialia. 47, 9, p. 577-582 6 p.

研究成果: Article › 査読

28 被引用数 (Scopus)

Tensile properties of Al-Si-Cu die-casting alloy in the partial solidification state

Shinji, K., Takahashi, H., Motoyama, Y. & Yoshida, M., 2013 10月 7, In: Keikinzoku/Journal of Japan Institute of Light Metals. 63, 7, p. 253-259 7 p.

研究成果: Article › 査読

4 被引用数 (Scopus)

Tensile rate dependency of mechanical properties of inconel 718 nickel-based superalloy around solidus temperature

Ogino, S., Ohashi, T., Kasuya, N. & Yoshida, M., 2013 5月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 5, p. 170-173 4 p.

研究成果: Article › 査読

1 被引用数 (Scopus)

The effect of pre-compressive strain on the fatigue life of the AZ31 magnesium alloy

Ozaki, J., Yosida, M. & Horibe, S., 2014 5月 16, In: Materials Science and Engineering A. 604, p. 192-195 4 p.

研究成果: Article › 査読

9 被引用数 (Scopus)

Thermal Stress Analysis of Residual Stress in a Cylindrical Aluminum Casting with Cast-in GCI Liner, Taking Recovery Behavior Effect into Account

Motoyama, Y., Ebihara, N., Shiga, H., Sato, T., Kambe, H. & Yoshida, M., 2018 1月 1, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

研究成果: Article › 査読

6 被引用数 (Scopus)

Thermo-elasto-plastic finite element analysis of warping deformation during casting of gray cast iron

Motoyama, Y., Sekiguchi, S., Okane, T. & Yoshida, M., 2020 3月, In: Journal of Materials Processing Technology. 277, 116454.

研究成果: Article › 査読

1 被引用数 (Scopus)

Ultrasonic insert casting of aluminum alloy

Pan, J., Yoshida, M., Sasaki, G., Fukunaga, H., Fujimura, H. & Matsuura, M., 2000 5月 3, In: Scripta Materialia. 43, 2, p. 155-159 5 p.

研究成果: Article › 査読

26 被引用数 (Scopus)

Verification of the Mechanism of Grain Refinement by Ultrasonic Treatment of Aluminum-4 Wt Pct Silicon Molten Alloy

Matsuda, K., Takehara, T., Yang, M., Uno, H., Kubo, T., Miyano, G. & Yoshida, M., 2016 5月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 5, p. 2509-2516 8 p.

研究成果: Article › 査読

8 被引用数 (Scopus)

Verification of the simulated residual stress in the cross section of gray cast iron stress lattice shape casting via thermal stress analysis

Motoyama, Y., Inukai, D., Okane, T. & Yoshida, M., 2014 4月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45, 4, p. 2315-2325 11 p.

研究成果: Article › 査読

12 被引用数 (Scopus)

Viscosity properties prediction of semi-solid aluminum alloys using finite element analysis based on quenched solidified structure, and experimental validation

Takatori, N., Amano, M., Miyachi, R., Nagata, Y., Faiz, M. K. & Yoshida, M., 2020 5月 15, In: Keikinzoku/Journal of Japan Institute of Light Metals. 70, 5, p. 187-193 7 p.

研究成果: Article › 査読

Open Access

Viscosity properties prediction of semi-solid aluminum alloys using finite element analysis based on quenched solidified structure, and experimental validation

Takatori, N., Amano, M., Miyachi, R., Nagata, Y., Faiz, M. K. & Yoshida, M., 2020 11月 25, In: Materials Transactions. 61, 12, p. 2371-2377 7 p.

研究成果: Article › 査読

半凝固状態のアルミニウム合金の最大引張応力および伸び値の支配因子

Takai, R., Hirohara, R., Endo, N., Nagata, Y., Okane, T. & Yoshida, M., 2019, In: Keikinzoku/Journal of Japan Institute of Light Metals. 69, 4, p. 255-262 8 p.

研究成果: Article › 査読

Open Access

吉田 誠

研究成果

検索結果

吉田誠