年別の研究成果
年別の研究成果
- 1 - 50 / 111 件
検索結果
-
2022
Evaluation of Ejection Force for Die Castings by FEM Thermal Stress Analysis with Elasto-Plastic-Creep Model
Ueda, S., Sannakanishi, S., Shiga, H., Faiz, M. K. & Yoshida, M., 2022, In: Materials Transactions. 63, 2, p. 217-223 7 p.研究成果: Article › 査読
Open Access -
Influence of solid cohesion on viscous properties in Norton law for aluminum alloys during partial solidification
Nagata, Y., Takai, R., Okane, T., Faiz, M. K. & Yoshida, M., 2022 1月 14, In: Materials Science and Engineering A. 832, 142339.研究成果: Article › 査読
-
2021
Effect of Sand Mold Constraint on Warpage Deformation of Lamellar Graphite Gray Cast Iron and Prediction by Elastoplastic-Creep Finite Element Analysis
Khairi Faiz, M., Uehara, K., Nakajima, T., Kanno, T., Hiramoto, Y., Miyashita, T., Okane, T. & Yoshida, M., 2021 6月, In: Journal of Materials Engineering and Performance. 30, 6, p. 4669-4680 12 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Measurement of viscous properties on Al-5mass%Mg alloy in semi-solid state by tensile test with high-frequency induction heating
Nagata, Y., Onizawa, R., Someya, M., Kotaki, H., Takai, R., Ebata, M., Okane, T., Faiz, M. K. & Yoshida, M., 2021 2月 15, In: Keikinzoku/Journal of Japan Institute of Light Metals. 71, 2, p. 112-120 9 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
2020
Measuring the interfacial heat transfer coefficient between flowing molten alloy and sand mold using fluidity tests
Motoyama, Y., Tokunaga, H., Yoshida, M., Maruyama, T. & Okane, T., 2020 2月, In: Journal of Materials Processing Technology. 276, 116394.研究成果: Article › 査読
3 被引用数 (Scopus) -
Thermo-elasto-plastic finite element analysis of warping deformation during casting of gray cast iron
Motoyama, Y., Sekiguchi, S., Okane, T. & Yoshida, M., 2020 3月, In: Journal of Materials Processing Technology. 277, 116454.研究成果: Article › 査読
2 被引用数 (Scopus) -
Viscosity properties prediction of semi-solid aluminum alloys using finite element analysis based on quenched solidified structure, and experimental validation
Takatori, N., Amano, M., Miyachi, R., Nagata, Y., Faiz, M. K. & Yoshida, M., 2020 5月 15, In: Keikinzoku/Journal of Japan Institute of Light Metals. 70, 5, p. 187-193 7 p.研究成果: Article › 査読
Open Access -
Viscosity properties prediction of semi-solid aluminum alloys using finite element analysis based on quenched solidified structure, and experimental validation
Takatori, N., Amano, M., Miyachi, R., Nagata, Y., Faiz, M. K. & Yoshida, M., 2020 11月 25, In: Materials Transactions. 61, 12, p. 2371-2377 7 p.研究成果: Article › 査読
-
2019
Controlling factor for maximum tensile stress and elongation of aluminum alloy during partial solidification
Takai, R., Hirohara, R., Endo, N., Nagata, Y., Okane, T. & Yoshida, M., 2019, In: Materials Transactions. 60, 11, p. 2406-2415 10 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Hot tearing prediction of casting via thermal stress analysis
Takai, R. & Yoshida, M., 2019, In: Keikinzoku/Journal of Japan Institute of Light Metals. 69, 8, p. 400-409 10 p.研究成果: Article › 査読
Open Access -
Image-based modeling of viscoelastic properties of solidifying Al alloys and model validation
Matsushita, A., Mizuno, H., Okane, T. & Yoshida, M., 2019 1月 1, In: Journal of Materials Processing Technology. 263, p. 321-329 9 p.研究成果: Article › 査読
7 被引用数 (Scopus) -
半凝固状態のアルミニウム合金の最大引張応力および伸び値の支配因子
Takai, R., Hirohara, R., Endo, N., Nagata, Y., Okane, T. & Yoshida, M., 2019, In: Keikinzoku/Journal of Japan Institute of Light Metals. 69, 4, p. 255-262 8 p.研究成果: Article › 査読
Open Access -
2018
Dynamic measurement of constraining force from green sand and casting contraction of gray cast iron during cooling
Ueno, S., Kashimura, H., Sano, Y., Toyoda, T., Makino, H. & Yoshida, M., 2018, In: Materials Transactions. 59, 6, p. 957-962 6 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Effect of temperature field and mechanical properties of casting on prediction of hot tearing tendency using FEM thermal stress analysis+1
Takai, R., Tsunoda, T., Kawada, Y., Hirohara, R., Okane, T. & Yoshida, M., 2018, In: Materials Transactions. 59, 8, p. 1333-1340 8 p.研究成果: Article › 査読
Open Access7 被引用数 (Scopus) -
Experimental and numerical analysis of grain refinement effect on hot tearing susceptibility for Al–Mg alloys
Takai, R., Endo, N., Hirohara, R., Tsunoda, T. & Yoshida, M., 2018 1月 1, (Accepted/In press) In: International Journal of Advanced Manufacturing Technology.研究成果: Article › 査読
10 被引用数 (Scopus) -
Hot tearing susceptibility of aluminum and magnesium alloys during casting (Part 1)
Takai, R., Otaki, M. & Yoshida, M., 2018, In: Keikinzoku/Journal of Japan Institute of Light Metals. 68, 1, p. 23-32 10 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Hot tearing susceptibility of aluminum and magnesium alloys during casting (Part 2)
Takai, R., Otaki, M. & Yoshida, M., 2018, In: Keikinzoku/Journal of Japan Institute of Light Metals. 68, 2, p. 79-90 12 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Thermal Stress Analysis of Residual Stress in a Cylindrical Aluminum Casting with Cast-in GCI Liner, Taking Recovery Behavior Effect into Account
Motoyama, Y., Ebihara, N., Shiga, H., Sato, T., Kambe, H. & Yoshida, M., 2018 1月 1, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.研究成果: Article › 査読
7 被引用数 (Scopus) -
2017
A New Theoretical Approach Based on the Maxwell Model to Obtain Rheological Properties of Solidifying Alloys and Its Validation
Matsushita, A., Takai, R., Ezaki, H., Okane, T. & Yoshida, M., 2017 4月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 48, 4, p. 1701-1707 7 p.研究成果: Article › 査読
6 被引用数 (Scopus) -
A parameterization method of recovery behavior based on initial yield stress – pre-strain diagram for an Al-Si-Cu high pressure die-casting alloy
Motoyama, Y., Saito, G., Ono, H. & Yoshida, M., 2017 1月 27, In: Materials Science and Engineering A. 684, p. 660-667 8 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Crack prediction for a partially solidified lead-free bronze casting using thermal stress analysis
Matsushita, A., Nakazawa, T., Okane, T. & Yoshida, M., 2017 11月 1, In: Journal of Materials Processing Technology. 249, p. 46-56 11 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
Effects of Recovery Behavior and Strain-Rate Dependence of Stress–Strain Curve on Prediction Accuracy of Thermal Stress Analysis During Casting
Motoyama, Y., Shiga, H., Sato, T., Kambe, H. & Yoshida, M., 2017 3月 13, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-11 11 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Low temperature and low pressure bonding of plateless Cu–Cu substrates by Ag-based transient liquid phase sintering
Muhammad, K. F., Yamamoto, T. & Yoshida, M., 2017 7月 1, In: Journal of Materials Science: Materials in Electronics. 28, 13, p. 9351-9362 12 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Low temperature Cu–Cu bonding by transient liquid phase sintering of mixed Cu nanoparticles and Sn–Bi eutectic powders
Khairi Faiz, M., Bansho, K., Suga, T., Miyashita, T. & Yoshida, M., 2017 11月 1, In: Journal of Materials Science: Materials in Electronics. 28, 21, p. 16433-16443 11 p.研究成果: Article › 査読
13 被引用数 (Scopus) -
Prediction and experimental validation of cooling rate dependence of viscoplastic properties in a partially solidified state of Al-5mass%Mg alloy
Hirohara, R., Kawada, Y., Takai, R., Otaki, M., Okane, T. & Yoshida, M., 2017, In: Keikinzoku/Journal of Japan Institute of Light Metals. 67, 6, p. 214-221 8 p.研究成果: Article › 査読
Open Access -
Prediction and experimental validation of cooling rate dependence of viscoplastic properties in a partially solidified state of Al-5 mass%Mg Alloy
Hirohara, R., Kawada, Y., Takai, R., Otaki, M., Okane, T. & Yoshida, M., 2017, In: Materials Transactions. 58, 9, p. 1299-1307 9 p.研究成果: Article › 査読
Open Access10 被引用数 (Scopus) -
2016
Analysis of partially pulsating fatigue process on carbon steel with microstructural observation
Shimano, H., Faiz, M. K., Hara, A., Yoshizumi, K., Yoshida, M. & Horibe, S., 2016 1月 10, In: Materials Science and Engineering A. 651, p. 83-88 6 p.研究成果: Article › 査読
-
Dynamic measurements of the load on gray cast iron castings and contraction of castings during cooling in furan sand molds
Marumoto, N., Kashimura, H., Yoshida, K., Toyoda, T., Okane, T. & Yoshida, M., 2016 11月 1, In: Journal of Materials Processing Technology. 237, p. 48-54 7 p.研究成果: Article › 査読
6 被引用数 (Scopus) -
Effect of Mn addition on the age-hardening behavior of an Al-(9-10)%Si-0.3%Mg die casting alloy in T5 and T6 heat treatment
Fukasawa, K., Mohri, R., Ohtake, T., Inoue, T., Kuroda, A., Kambe, H. & Yoshida, M., 2016, In: Materials Transactions. 57, 6, p. 959-965 7 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Elasto-Plastic-Creep Constitutive Equation of an Al-Si-Cu High-Pressure Die Casting Alloy for Thermal Stress Analysis
Motoyama, Y., Shiga, H., Sato, T., Kambe, H. & Yoshida, M., 2016 11月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 11, p. 5598-5608 11 p.研究成果: Article › 査読
6 被引用数 (Scopus) -
Grain refinement effects on the strain rate sensitivity and grain boundary sliding in partially solidified Al-5 wt%Mg alloy
Takai, R., Kimura, S., Kashiuchi, R., Kotaki, H. & Yoshida, M., 2016 6月 14, In: Materials Science and Engineering A. 667, p. 417-425 9 p.研究成果: Article › 査読
27 被引用数 (Scopus) -
Mechanical Properties of a Partially Solidified Cu-Zn Alloy
Kasuya, N., Nakazawa, T., Matsushita, A., Okane, T. & Yoshida, M., 2016 2月 3, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-7 7 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Verification of the Mechanism of Grain Refinement by Ultrasonic Treatment of Aluminum-4 Wt Pct Silicon Molten Alloy
Matsuda, K., Takehara, T., Yang, M., Uno, H., Kubo, T., Miyano, G. & Yoshida, M., 2016 5月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 5, p. 2509-2516 8 p.研究成果: Article › 査読
8 被引用数 (Scopus) -
2015
Development of an elasto-viscoplastic constitutive equation for an al-mg alloy undergoing a tensile test during partial solidification
Takai, R., Matsushita, A., Yanagida, S., Nakamura, K. & Yoshida, M., 2015, In: Materials Transactions. 56, 8, p. 1233-1241 9 p.研究成果: Article › 査読
18 被引用数 (Scopus) -
2014
Analysis of a pulsating fatigue process on carbon steel with different carbide shapes
Hara, A., Kitazawa, R., Yoshida, M. & Horibe, S., 2014 1月 10, In: Materials Science and Engineering A. 590, p. 218-223 6 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Effect of stacking fault energy on pulsating fatigue behavior for fcc metals under the fully repeated loading
Sakaki, S., Yoshida, M. & Horibe, S., 2014 6月 23, In: Materials Science and Engineering A. 607, p. 1-5 5 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
The effect of pre-compressive strain on the fatigue life of the AZ31 magnesium alloy
Ozaki, J., Yosida, M. & Horibe, S., 2014 5月 16, In: Materials Science and Engineering A. 604, p. 192-195 4 p.研究成果: Article › 査読
10 被引用数 (Scopus) -
Verification of the simulated residual stress in the cross section of gray cast iron stress lattice shape casting via thermal stress analysis
Motoyama, Y., Inukai, D., Okane, T. & Yoshida, M., 2014 4月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 45, 4, p. 2315-2325 11 p.研究成果: Article › 査読
12 被引用数 (Scopus) -
2013
A verification of the thermal stress analysis, including the furan sand mold, used to predict the thermal stress in castings
Motoyama, Y., Inoue, Y., Saito, G. & Yoshida, M., 2013 1月 1, In: Journal of Materials Processing Technology. 213, 12, p. 2270-2277 8 p.研究成果: Article › 査読
18 被引用数 (Scopus) -
Development of elasto-viscoplastic constitutive equation for Al-Mg alloy with tensile test in partial solidification
Takai, R., Matsushita, A., Yanagida, S., Nakamura, K. & Yoshida, M., 2013 11月 18, In: Keikinzoku/Journal of Japan Institute of Light Metals. 63, 9, p. 310-317 8 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Dynamic measurements of the load on castings and the contraction of castings during cooling in sand molds
Motoyama, Y., Takahashi, H., Inoue, Y., Shinji, K. & Yoshida, M., 2013 2月, In: Journal of Materials Processing Technology. 213, 2, p. 238-244 7 p.研究成果: Article › 査読
11 被引用数 (Scopus) -
Effect of creep and cyclic loading on pulsating fatigue behavior for various ti alloys under stress ratio R = 0
Nagatani, G. I., Kitazawa, R., Yoshida, M. & Horibe, S., 2013 10月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 10, p. 455-460 6 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Effect of sand mold models on the simulated mold restraint force and the contraction of the casting during cooling in green sand molds
Inoue, Y., Motoyama, Y., Takahashi, H., Shinji, K. & Yoshida, M., 2013, In: Journal of Materials Processing Technology. 213, 7, p. 1157-1165 9 p.研究成果: Article › 査読
16 被引用数 (Scopus) -
Effect of twinning and aging treatment on fatigue process of ZK60 magnesium alloys
Taniguchi, S., Kitazawa, R., Tanaka, Y., Yoshida, M. & Horibe, S., 2013 10月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 10, p. 448-454 7 p.研究成果: Article › 査読
-
Evaluation of solidification cracking susceptibility of heat-resistant magnesium alloy produced by semi-solid injection molding process
Fujii, T., Yamamoto, M., Shinozaki, K., Misawa, R., Nagai, A., Yoshida, M. & Tanaka, T., 2013, In: Keikinzoku/Journal of Japan Institute of Light Metals. 63, 6, p. 223-228 6 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Influence of compressive pre-strain on tensile fatigue life in carbon steel S45C
Tamaki, H., Kitazawa, R., Yoshida, M. & Horibe, S., 2013 11月 1, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 11, p. 503-508 6 p.研究成果: Article › 査読
-
Investigation of the dominating mechanism of fatigue life for various alloys with CSSC on R = O and -1
Komori, A., Watanabe, E., Toda, M., Kitazawa, R., Yoshida, M. & Horibe, S., 2013 8月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 8, p. 295-299 5 p.研究成果: Article › 査読
-
Numerical and experimental study on residual stress in gray cast iron stress lattice shape casting
Motoyama, Y., Takahashi, H., Okane, T., Fukuda, Y. & Yoshida, M., 2013 3月 13, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 7, p. 3261-3270 10 p.研究成果: Article › 査読
9 被引用数 (Scopus) -
Relationship between Masing behavior and dislocation structure of AISI 1025 under different stress ratios in cyclic deformation
Watanabe, E., Asao, T., Toda, M., Yoshida, M. & Horibe, S., 2013 10月, In: Materials Science and Engineering A. 582, p. 55-62 8 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Tensile properties of Al-Si-Cu die-casting alloy in the partial solidification state
Shinji, K., Takahashi, H., Motoyama, Y. & Yoshida, M., 2013 10月 7, In: Keikinzoku/Journal of Japan Institute of Light Metals. 63, 7, p. 253-259 7 p.研究成果: Article › 査読
4 被引用数 (Scopus)