年別の研究成果
年別の研究成果
検索結果
-
Image-based modeling of viscoelastic properties of solidifying Al alloys and model validation
Matsushita, A., Mizuno, H., Okane, T. & Yoshida, M., 2019 1月 1, In: Journal of Materials Processing Technology. 263, p. 321-329 9 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
HREM and EDS analysis of sintered SiC fibre reinforced MAS glass composites
Nagahisa, K., Yoshida, M., Abe, E., Fukunaga, H. & Sasaki, G., 2002 7月 10, In: Journal of Electron Microscopy. 51, SUPPL., p. S159-S164研究成果: Article › 査読
1 被引用数 (Scopus) -
Hot tearing susceptibility of aluminum and magnesium alloys during casting (Part 2)
Takai, R., Otaki, M. & Yoshida, M., 2018, In: Keikinzoku/Journal of Japan Institute of Light Metals. 68, 2, p. 79-90 12 p.研究成果: Article › 査読
Open Access -
Hot tearing susceptibility of aluminum and magnesium alloys during casting (Part 1)
Takai, R., Otaki, M. & Yoshida, M., 2018, In: Keikinzoku/Journal of Japan Institute of Light Metals. 68, 1, p. 23-32 10 p.研究成果: Article › 査読
Open Access -
Hot tearing prediction of casting via thermal stress analysis
Takai, R. & Yoshida, M., 2019, In: Keikinzoku/Journal of Japan Institute of Light Metals. 69, 8, p. 400-409 10 p.研究成果: Article › 査読
Open Access -
Grain refinement effects on the strain rate sensitivity and grain boundary sliding in partially solidified Al-5 wt%Mg alloy
Takai, R., Kimura, S., Kashiuchi, R., Kotaki, H. & Yoshida, M., 2016 6月 14, In: Materials Science and Engineering A. 667, p. 417-425 9 p.研究成果: Article › 査読
23 被引用数 (Scopus) -
Formation behavior of acoustic cavitation in molten aluminum alloys under ultrasonic vibration
Matsunaga, T., Ogata, K., Hatayama, T., Shinozaki, K. & Yoshida, M., 2006 4月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 56, 4, p. 214-220 7 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Fabrication process of carbon nanotube/light metal matrix composites by squeeze casting
Uozumi, H., Kobayashi, K., Nakanishi, K., Matsunaga, T., Shinozaki, K., Sakamoto, H., Tsukada, T., Masuda, C. & Yoshida, M., 2008 11月 15, In: Materials Science and Engineering A. 495, 1-2, p. 282-287 6 p.研究成果: Article › 査読
126 被引用数 (Scopus) -
Fabrication Process and Evaluation of the Sintered SiC Fiber Reinforced SiO2-Mullite Composites
Nagahisa, K., Iwamoto, K., Shinozaki, K., Fukunaga, H., Sasaki, G. & Yoshida, M., 2004 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 68, 2, p. 162-171 10 p.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Fabrication of continuous carbon fiber-reinforced aluminum-magnesium alloy composite wires using ultrasonic infiltration method
Matsunaga, T., Matsuda, K., Hatayama, T., Shinozaki, K. & Yoshida, M., 2007 8月 1, In: Composites Part A: Applied Science and Manufacturing. 38, 8, p. 1902-1911 10 p.研究成果: Article › 査読
73 被引用数 (Scopus) -
Fabrication of aluminum borate whisker reinforced AZ91D magnesium alloy composites by semi-solid process and their mechanical properties
Yoshida, M., Takeuchi, S., Pan, J., Sasaki, G., Fuyama, N., Fujii, T. & Fukunaga, H., 2001 1月 1, In: Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials. 10, 2-3, p. 255-263 9 p.研究成果: Article › 査読
4 被引用数 (Scopus) -
Fabrication conditions and microstructures of Al18B4O33/AZ91D magnesium alloy composites by compo-casting
Sasaki, G., Hara, S., Yoshida, M., Fuyama, N. & Fujii, T., 2002 5月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 52, 5, p. 216-220 5 p.研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Fabrication and oxidation behavior of sintered SiC fiber reinforced SiO2-mullite composite with BN interphase
Nagahisa, K., Shimojo, Y., Sasaki, G. & Yoshida, M., 2007 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 71, 2, p. 275-283 9 p.研究成果: Article › 査読
-
Experimental and numerical analysis of grain refinement effect on hot tearing susceptibility for Al–Mg alloys
Takai, R., Endo, N., Hirohara, R., Tsunoda, T. & Yoshida, M., 2018 1月 1, (Accepted/In press) In: International Journal of Advanced Manufacturing Technology.研究成果: Article › 査読
7 被引用数 (Scopus) -
Evaluation of solidification cracking susceptibility of heat-resistant magnesium alloy produced by semi-solid injection molding process
Fujii, T., Yamamoto, M., Shinozaki, K., Misawa, R., Nagai, A., Yoshida, M. & Tanaka, T., 2013, In: Keikinzoku/Journal of Japan Institute of Light Metals. 63, 6, p. 223-228 6 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Evaluation of Ejection Force for Die Castings by FEM Thermal Stress Analysis with Elasto-Plastic-Creep Model
Ueda, S., Sannakanishi, S., Shiga, H., Faiz, M. K. & Yoshida, M., 2022, In: Materials Transactions. 63, 2, p. 217-223 7 p.研究成果: Article › 査読
Open Access -
Elasto-Plastic-Creep Constitutive Equation of an Al-Si-Cu High-Pressure Die Casting Alloy for Thermal Stress Analysis
Motoyama, Y., Shiga, H., Sato, T., Kambe, H. & Yoshida, M., 2016 11月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 47, 11, p. 5598-5608 11 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Effects of roughness pitch of surfaces on their wettability
Nakae, H., Yoshida, M. & Yokota, M., 2005 5月, In: Journal of Materials Science. 40, 9-10, p. 2287-2293 7 p.研究成果: Article › 査読
32 被引用数 (Scopus) -
Effects of Recovery Behavior and Strain-Rate Dependence of Stress–Strain Curve on Prediction Accuracy of Thermal Stress Analysis During Casting
Motoyama, Y., Shiga, H., Sato, T., Kambe, H. & Yoshida, M., 2017 3月 13, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. p. 1-11 11 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Effect of whisker surface treatment on the strength of Al18B4O33/Al alloy composites
Pan, J., Lee, S. P., Yoshida, M., Sasaki, G., Fuyama, N., Fujii, T. & Fukunaga, H., 2001 12月 1, In: Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials. 10, 4, p. 299-307 9 p.研究成果: Article › 査読
6 被引用数 (Scopus) -
Effect of water cooling conditions on splash break occurance during aluminum DC casting
Morishita, M., Abe, M. & Yoshida, M., 2010, In: Keikinzoku/Journal of Japan Institute of Light Metals. 60, 8, p. 379-385 7 p.研究成果: Article › 査読
-
Effect of twinning and aging treatment on fatigue process of ZK60 magnesium alloys
Taniguchi, S., Kitazawa, R., Tanaka, Y., Yoshida, M. & Horibe, S., 2013 10月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 10, p. 448-454 7 p.研究成果: Article › 査読
-
Effect of Thermal Residual Stress on Matrix Cracking Strain and Fracture Behavior of the Sintered SiC Fiber Reinforced SiO2-Mullite Composites
Nagahisa, K., Iwamoto, K., Shinozaki, K., Sasaki, G., Enoki, M. & Yoshida, M., 2004 2月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 68, 2, p. 172-180 9 p.研究成果: Article › 査読
Open Access1 被引用数 (Scopus) -
Effect of temperature field and mechanical properties of casting on prediction of hot tearing tendency using FEM thermal stress analysis+1
Takai, R., Tsunoda, T., Kawada, Y., Hirohara, R., Okane, T. & Yoshida, M., 2018, In: Materials Transactions. 59, 8, p. 1333-1340 8 p.研究成果: Article › 査読
6 被引用数 (Scopus) -
Effect of stacking fault energy on pulsating fatigue behavior for fcc metals under the fully repeated loading
Sakaki, S., Yoshida, M. & Horibe, S., 2014 6月 23, In: Materials Science and Engineering A. 607, p. 1-5 5 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Effect of sand mold models on the simulated mold restraint force and the contraction of the casting during cooling in green sand molds
Inoue, Y., Motoyama, Y., Takahashi, H., Shinji, K. & Yoshida, M., 2013, In: Journal of Materials Processing Technology. 213, 7, p. 1157-1165 9 p.研究成果: Article › 査読
15 被引用数 (Scopus) -
Effect of Sand Mold Constraint on Warpage Deformation of Lamellar Graphite Gray Cast Iron and Prediction by Elastoplastic-Creep Finite Element Analysis
Khairi Faiz, M., Uehara, K., Nakajima, T., Kanno, T., Hiramoto, Y., Miyashita, T., Okane, T. & Yoshida, M., 2021 6月, In: Journal of Materials Engineering and Performance. 30, 6, p. 4669-4680 12 p.研究成果: Article › 査読
-
Effect of pre-aging conditions on T5 heat treatment behavior of Al-9%Si-0.3%Mg die-casting alloy
Inoue, T., Goto, M., Yamaguchi, A., Otake, T., Kuroda, A. & Yoshida, M., 2011, In: Keikinzoku/Journal of Japan Institute of Light Metals. 61, 10, p. 507-512 6 p.研究成果: Article › 査読
Open Access4 被引用数 (Scopus) -
Effect of powder lubricants on surface quality of aluminum alloy die-castings
Yae, H., Kimura, R., Yosida, M., Sasaki, G., Pan, J., Yokoyama, K. & Fukunaga, H., 2002 7月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 52, 7, p. 303-307 5 p.研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Effect of Mn addition on the age-hardening behavior of an Al-(9-10)%Si-0.3%Mg die casting alloy in T5 and T6 heat treatment
Fukasawa, K., Mohri, R., Ohtake, T., Inoue, T., Kuroda, A., Kambe, H. & Yoshida, M., 2016, In: Materials Transactions. 57, 6, p. 959-965 7 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Effect of magnesium content on tensile strength of carbon-fiber-reinforced aluminum-magnesium alloy composite wires fabricated by ultrasonic infiltration method
Matsunaga, T., Matsuda, K., Hatayama, T., Shinozaki, K., Amanuma, S. & Yoshida, M., 2006 2月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 56, 2, p. 105-111 7 p.研究成果: Article › 査読
4 被引用数 (Scopus) -
Effect of lamination structures on impact properties of Al18B4O33w/ Al and aluminum laminate composites
Lee, S. P., Yoshida, M., Sasaki, G. & Fukunaga, H., 1998 5月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 48, 5, p. 232-236 5 p.研究成果: Article › 査読
Open Access -
Effect of interfacial reaction on bending strength of Al18B4O33 whisker-reinforced aluminum composites
Yao, L. J., Sasaki, G., Pan, J., Yoshida, M. & Fukunaga, H., 1998, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 29, 5, p. 1517-1524 8 p.研究成果: Article › 査読
10 被引用数 (Scopus) -
Effect of hydrogen in molten aluminum on the growth of micro-porosity and mechanical properties of squeeze cast material
Yoshida, M., Taki, K. & Fukunaga, H., 2000, In: Keikinzoku/Journal of Japan Institute of Light Metals. 50, 7, p. 325-329 5 p.研究成果: Article › 査読
Open Access4 被引用数 (Scopus) -
Effect of grain refiner and grain size on the susceptibility of Al-Mg die casting alloy to cracking during solidification
Kimura, R., Hatayama, H., Shinozaki, K., Murashima, I., Asada, J. & Yoshida, M., 2009 1月 1, In: Journal of Materials Processing Technology. 209, 1, p. 210-219 10 p.研究成果: Article › 査読
39 被引用数 (Scopus) -
Effect of creep and cyclic loading on pulsating fatigue behavior for various ti alloys under stress ratio R = 0
Nagatani, G. I., Kitazawa, R., Yoshida, M. & Horibe, S., 2013 10月, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 10, p. 455-460 6 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Effect of a whisker surface treatment on the strength of Al18B4O33 whisker reinforced AC4CH aluminum alloy composites
Pan, J., Okamoto, A., Lee, S. P., Sasaki, G., Yoshida, M. & Fukunaga, H., 2001, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 65, 3, p. 199-206 8 p.研究成果: Article › 査読
Open Access5 被引用数 (Scopus) -
Effect of acoustic cavitation on ease of infiltration of molten aluminum alloys into carbon fiber bundles using ultrasonic infiltration method
Matsunaga, T., Ogata, K., Hatayama, T., Shinozaki, K. & Yoshida, M., 2007 3月, In: Composites Part A: Applied Science and Manufacturing. 38, 3, p. 771-778 8 p.研究成果: Article › 査読
47 被引用数 (Scopus) -
Dynamic measurements of the load on gray cast iron castings and contraction of castings during cooling in furan sand molds
Marumoto, N., Kashimura, H., Yoshida, K., Toyoda, T., Okane, T. & Yoshida, M., 2016 11月 1, In: Journal of Materials Processing Technology. 237, p. 48-54 7 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Dynamic measurements of the load on castings and the contraction of castings during cooling in sand molds
Motoyama, Y., Takahashi, H., Inoue, Y., Shinji, K. & Yoshida, M., 2013 2月, In: Journal of Materials Processing Technology. 213, 2, p. 238-244 7 p.研究成果: Article › 査読
11 被引用数 (Scopus) -
Dynamic measurement of constraining force from green sand and casting contraction of gray cast iron during cooling
Ueno, S., Kashimura, H., Sano, Y., Toyoda, T., Makino, H. & Yoshida, M., 2018, In: Materials Transactions. 59, 6, p. 957-962 6 p.研究成果: Article › 査読
-
Development of the theories of solidification cracking and measuring methods for mechanical properties of solid-liquid coexistence alloys (The 1980s or later)
Watanabe, T., Kimura, R., Nakazawa, T., Chiba, H., Tanaka, S., Ueki, T., Toriyama, T. & Yoshida, M., 2008 9月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 58, 9, p. 464-472 9 p.研究成果: Article › 査読
12 被引用数 (Scopus) -
Development of the theories of solidification cracking and measuring methods for mechanical properties of solid-liquid coexistence alloys (from the 1950s to the 1970s)
Watanabe, T., Kimura, R., Nakazawa, T., Chiba, H., Tanaka, S., Ueki, T., Toriyama, T. & Yoshida, M., 2008 8月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 58, 8, p. 395-405 11 p.研究成果: Article › 査読
13 被引用数 (Scopus) -
Development of the detecting methods for acoustic emission of aluminum alloys in solidification process
Ueki, T., Endo, I., Matsushita, A. & Yoshida, M., 2011, In: Keikinzoku/Journal of Japan Institute of Light Metals. 61, 7, p. 334-340 7 p.研究成果: Article › 査読
1 被引用数 (Scopus) -
Development of method for measuring mechanical properties of semi-liquid Al-Mg alloy by high frequency induction heating
Zama, A., Nakazawa, T., Toshimitsu, K. & Yoshida, M., 2011, In: Keikinzoku/Journal of Japan Institute of Light Metals. 61, 5, p. 181-186 6 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Development of in-situ measuring methods for mechanical properties on semi-solid aluminum alloy
Chiba, H., Ueki, T., Toriyama, T., Endo, I., Kobayashi, T. & Yoshida, M., 2011, In: Keikinzoku/Journal of Japan Institute of Light Metals. 61, 4, p. 135-141 7 p.研究成果: Article › 査読
4 被引用数 (Scopus) -
Development of elasto-viscoplastic constitutive equation for Al-Mg alloy with tensile test in partial solidification
Takai, R., Matsushita, A., Yanagida, S., Nakamura, K. & Yoshida, M., 2013 11月 18, In: Keikinzoku/Journal of Japan Institute of Light Metals. 63, 9, p. 310-317 8 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
Development of an elasto-viscoplastic constitutive equation for an al-mg alloy undergoing a tensile test during partial solidification
Takai, R., Matsushita, A., Yanagida, S., Nakamura, K. & Yoshida, M., 2015, In: Materials Transactions. 56, 8, p. 1233-1241 9 p.研究成果: Article › 査読
18 被引用数 (Scopus) -
Development of a device for dynamical measurement of the load on casting and the contraction of the casting in a sand mold during cooling
Motoyama, Y., Takahashi, H., Inoue, Y., Shinji, K. & Yoshida, M., 2012 6月, In: Journal of Materials Processing Technology. 212, 6, p. 1399-1405 7 p.研究成果: Article › 査読
18 被引用数 (Scopus) -
Development in manufacturing of carbon fiber reinforced aluminum preform wires using ultrasonic infiltration method
Matsunaga, T., Matsuda, K., Hatayama, T., Shinozaki, K., Amanuma, S., Jin, P. & Yoshida, M., 2006 1月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 56, 1, p. 28-33 6 p.研究成果: Article › 査読
7 被引用数 (Scopus)