年別の研究成果
年別の研究成果
研究成果
検索結果
-
Article
Prediction method of void distribution near punched surface of medium-carbon steel sheet using scrap
Saito, K., Inoue, C., Ikegawa, J., Yamazaki, K., Goto, S., Takamura, M., Mihara, S. & Suzuki, S., 2021, In: isij international. 61, 1, p. 417-423 7 p.研究成果: Article › 査読
Open Access -
Prediction of Temperature Dependence of Impurity Diffusion Coefficients in Liquid Metal Based on a Hard-Sphere Model from Measurements Using Shear Cell Technique and Stable Density Layering
Shiinoki, M., Yamada, N., Tanaka, A. & Suzuki, S., 2022 2月, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 53, 1, p. 29-40 12 p.研究成果: Article › 査読
-
Production of A1-12 mass%Si alloy rapidly solidified clad strip by melt drag process
Suzuki, S. & Motomura, M., 1995, In: Journal of Japan Institute of Light Metals. 45, 12, p. 685-690 6 p.研究成果: Article › 査読
Open Access7 被引用数 (Scopus) -
Production of Al-12%Si alloy strip in higher roll speed by melt drag process equipped with a forming belt
Suzuki, S., Haga, T. & Motomura, M., 1997, In: Keikinzoku/Journal of Japan Institute of Light Metals. 47, 11, p. 632-637 6 p.研究成果: Article › 査読
Open Access -
Production of Al-12mass%Si alloy strip by melt drag process
Haga, T., Motomura, M., Munaf, A. & Suzuki, S., 1994, In: Journal of Japan Institute of Light Metals. 44, 3, p. 136-141 6 p.研究成果: Article › 査読
Open Access8 被引用数 (Scopus) -
Publication of JIS and ISO standards for evaluation of porous and cellular metals*
Suzuki, S., Kobashi, M., Ono, F. & Kanetake, N., 2017, In: Keikinzoku/Journal of Japan Institute of Light Metals. 67, 11, p. 554-558 5 p.研究成果: Article › 査読
Open Access -
Quantitative analysis of sulfur segregation at the oxide/substrate interface in Ni-base single crystal superalloy
Tabata, C., Kawagishi, K., Uzuhashi, J., Ohkubo, T., Hono, K., Yokokawa, T., Harada, H. & Suzuki, S., 2021 3月 15, In: Scripta Materialia. 194, 113616.研究成果: Article › 査読
4 被引用数 (Scopus) -
Reduction of Cracks During Punching Process by Cementite in High Tensile Strength Steel Sheets
Okano, T., Inoue, C., Suzuki, S., Yamazaki, K. & Toyoda, S., 2018 1月 1, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.研究成果: Article › 査読
3 被引用数 (Scopus) -
Relationship between mesoscale structure and ductility of drawn high carbon steel wire
Gondo, S., Tanemura, R., Mitsui, R., Kajino, S., Asakawa, M., Takemoto, K., Tashima, K. & Suzuki, S., 2021 1月 7, In: Materials Science and Engineering A. 800, 140283.研究成果: Article › 査読
4 被引用数 (Scopus) -
Roll casting of aluminum alloy strip by melt drag twin roll caster
Haga, T. & Suzuki, S., 2001 12月 3, In: Journal of Materials Processing Technology. 118, 1-3, p. 165-168 4 p.研究成果: Article › 査読
17 被引用数 (Scopus) -
Self-diffusion Measurements of Liquid Sn Using the Shear Cell Technique and Stable Density Layering
Shiinoki, M., Hashimoto, N., Fukuda, H., Ando, Y. & Suzuki, S., 2018 12月 1, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49, 6, p. 3357-3366 10 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Self-diffusion of Pd, Cu and Ni in Pd-based equilibrium melts
Griesche, A., Macht, M. P., Suzuki, S., Kraatz, K. H. & Frohberg, G., 2007 9月, In: Scripta Materialia. 57, 6, p. 477-480 4 p.研究成果: Article › 査読
27 被引用数 (Scopus) -
Semi-solid forming characteristics of Al-12%Si alloy strip surface cast by melt drag process with a forming roll
Suzuki, S., Haga, T. & Motomura, M., 1997, In: Keikinzoku/Journal of Japan Institute of Light Metals. 47, 11, p. 638-643 6 p.研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Semi-solid forming of free solidification surface of strip cast Al-Si alloy by melt drag process
Haga, T., Motomura, M., Munaf, A. & Suzuki, S., 1994, In: Journal of Japan Institute of Light Metals. 44, 9, p. 498-503 6 p.研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Shear cell development for diffusion experiments in foton-satellite missions and on the ground with consideration of shear-induced convection
Suzuki, S., Kraatz, K. H., Griesche, A. & Frohberg, G., 2005 1月 1, In: Microgravity Science and Technology. 16, 1, p. 127-132 6 p.研究成果: Article › 査読
17 被引用数 (Scopus) -
Simple energy dissipation model of riveted lap joint in aircraft structure
Tachi, T., Machida, S., Okada, T. & Suzuki, S., 2017, In: Transactions of the Japan Society for Aeronautical and Space Sciences. 60, 6, p. 341-346 6 p.研究成果: Article › 査読
-
Simultaneous measurement of interdiffusion and intrinsic diffusion coefficients in liquid metals on the ground
Fukuda, H., Shiinoki, M., Nishimura, Y. & Suzuki, S., 2019 4月, In: International Journal of Heat and Mass Transfer. 133, p. 531-541 11 p.研究成果: Article › 査読
3 被引用数 (Scopus) -
Single roll method for foil casting of the aluminum alloy
Haga, T. & Suzuki, S., 2003 6月 30, In: Journal of Materials Processing Technology. 137, 1-3 SPEC, p. 86-91 6 p.研究成果: Article › 査読
7 被引用数 (Scopus) -
Stabilization mechanism of semi-solid film simulating the cell wall during fabrication of aluminum foam
Kuwahara, T., Kaya, A., Osaka, T., Takamatsu, S. & Suzuki, S., 2020 3月, In: Metals. 10, 3, 333.研究成果: Article › 査読
Open Access3 被引用数 (Scopus) -
Strength and pore morphology of porous aluminum and porous copper with directional pores deformed by equal channel angular extrusion
Kim, T. B., Tane, M., Suzuki, S., Utsunomiya, H., Ide, T. & Nakajima, H., 2011 3月 15, In: Materials Science and Engineering A. 528, 6, p. 2363-2369 7 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
Strengthening of lotus-type porous copper by ECAE process
Lobos, J., Suzuki, S., Utsunomiya, H., Nakajima, H. & Rodrigez-Perez, M. A., 2012 10月, In: Journal of Materials Processing Technology. 212, 10, p. 2007-2011 5 p.研究成果: Article › 査読
14 被引用数 (Scopus) -
Strip casting of A5182 alloy using a melt drag twin-roll caster
Haga, T., Nishiyama, T. & Suzuki, S., 2003 2月 1, In: Journal of Materials Processing Technology. 133, 1-2, p. 103-107 5 p.研究成果: Article › 査読
47 被引用数 (Scopus) -
Structural change and improvement of the mechanical properties of a lotus-type porous copper by wire-brushing
Lobos, J., Suzuki, S., Nakajima, H., Ji, Y. S., Fujii, H., Terada, D. & Tsuji, N., 2009 1月 1, In: Journal of Physics: Conference Series. 165, 012070.研究成果: Article › 査読
13 被引用数 (Scopus) -
Study on high-speed twin-roll caster for aluminum alloys
Haga, T. & Suzuki, S., 2003 12月 20, In: Journal of Materials Processing Technology. 143-144, 1, p. 895-900 6 p.研究成果: Article › 査読
30 被引用数 (Scopus) -
Suppressing Natural Convection for Self-diffusion Measurement in Liquid Pb Using Shear Cell Technique by Stable Density Layering of Isotopic Concentration
Shiinoki, M., Nishimura, Y., Noboribayashi, K. & Suzuki, S., 2021 12月, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 6, p. 3846-3859 14 p.研究成果: Article › 査読
-
Temperature Dependence of CaO Desulfurization Mechanism in Molten Ni-Base Superalloy
Kishimoto, Y., Kono, T., Horie, T., Yokokawa, T., Osawa, M., Kawagishi, K., Suzuki, S. & Harada, H., 2021 6月, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 3, p. 1450-1462 13 p.研究成果: Article › 査読
5 被引用数 (Scopus) -
The Effect of CaO-MgO Mixture on Desulfurization of Molten Ni-Base Superalloy
Horie, T., Kono, T., Kishimoto, Y., Kawagishi, K., Suzuki, S. & Harada, H., 2021 8月, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 4, p. 2687-2702 16 p.研究成果: Article › 査読
-
The effect of shear convection on diffusion measurements in liquid metals using the Foton shear cell
Suzuki, S., Kraatz, K. H. & Frohberg, G., 2006 1月 1, In: Microgravity Science and Technology. 18, 3-4, p. 155-159 5 p.研究成果: Article › 査読
7 被引用数 (Scopus) -
Void formation by cementite and local misorientation evaluation during tensile deformation in high strength steel sheets
Maeda, M., Shimamura, J. & Suzuki, S., 2017, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 103, 8, p. 483-490 8 p.研究成果: Article › 査読
2 被引用数 (Scopus) -
転位速度-応力指数および転位速度係数を用いた転位速度の塑性ひずみ依存性の解明
Ueno, K., Murasawa, K., Suzuki, Y., Takamura, M., Hama, T., Hakoyama, T. & Suzuki, S., 2020, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 84, 10, p. 326-333 8 p.研究成果: Article › 査読
Open Access