鈴木 進補

研究成果

年別の研究成果 1994 2009 2010 2016 2018 2019 2020 2021 2022 2022

• 94 Article
• 29 Conference contribution
• 9 Conference article
• 2 Comment/debate

年別の研究成果

年別の研究成果

検索結果

• 2022

  Creep Durability of Ni-Base Single Crystal Superalloy Containing Pb Impurity

  Horie, T., Kawagishi, K., Takata, Y., Yokokawa, T., Suzuki, S. & Harada, H., 2022 7月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 53, 7, p. 2627-2641 15 p.

  研究成果: Article › 査読

  • Superalloys 100%
  • Creep 94%
  • Single crystals 88%
  • durability 83%
  • creep tests 80%

• Diffusion coefficient analysis method using data statistical processing to reduce interference fringe noise effects

  Tominaga, K., Orikasa, I., Tomaru, M., Osada, T., Hashimoto, Y., Inatomi, Y. & Suzuki, S., 2022 3月, In: AIChE Journal. 68, 3, e17497.

  研究成果: Article › 査読

  • noise effect 100%
  • statistical data 75%
  • Noise 63%
  • Diffusion Coefficient 59%
  • field of view 30%

• Natural convection induced by unintended horizontal temperature distribution in a narrow-closed container heated from above

  Orikasa, I., Osada, T., Inatomi, Y., Ueno, I. & Suzuki, S., 2022 2月, In: International Journal of Heat and Mass Transfer. 183, 122018.

  研究成果: Article › 査読

  • containers 100%
  • Natural convection 99%
  • free convection 98%
  • tracers 92%
  • Containers 89%

• Ni 基単結晶超合金のラフト組織

  Saito, T., Harada, H., Yokokawa, T., Osawa, M., Kawagishi, K. & Suzuki, S., 2022, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 86, 9, p. 157-171 15 p.

  研究成果: Article › 査読

  Open Access

  • rafts 100%
  • Superalloys 91%
  • Creep 86%
  • heat resistant alloys 73%
  • Nickel 65%

• Prediction of Temperature Dependence of Impurity Diffusion Coefficients in Liquid Metal Based on a Hard-Sphere Model from Measurements Using Shear Cell Technique and Stable Density Layering

  Shiinoki, M., Yamada, N., Tanaka, A. & Suzuki, S., 2022 2月, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 53, 1, p. 29-40 12 p.

  研究成果: Article › 査読

  • Hard-Sphere Model 100%
  • Liquid metals 68%
  • liquid metals 63%
  • Impurities 59%
  • Shear 57%

• Prediction of the Stress Decreasing Behavior in the Early Stage of Stress Relaxation in Steel Sheet

  Murasawa, K., Ueno, K., Kusuda, Y., Takamura, M., Hama, T., Hakoyama, T. & Suzuki, S., 2022, In: isij international. 62, 5, p. 1004-1012 9 p.

  研究成果: Article › 査読

  Open Access

  • Stress Relaxation 100%
  • Stress relaxation 89%
  • Steel sheet 80%
  • Strain 26%
  • Strain rate 20%
  1 被引用数 (Scopus)

• Unveiling the Mechanism of Improved Oxidation Resistance for CaO Crucible Melting Using Ni-Al Alloy

  Tabata, C., Kawagishi, K., Uzuhashi, J., Ohkubo, T., Yokokawa, T., Harada, H. & Suzuki, S., 2022 7月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 53, 7, p. 2452-2458 7 p.

  研究成果: Article › 査読

  • Crucibles 100%
  • Oxidation resistance 93%
  • Crucible 89%
  • oxidation resistance 87%
  • Calcium oxide 86%
  2 被引用数 (Scopus)
• 2021

  A statistical approach to evaluate the influence of geometric parameters on fracture of the cell walls in porous aluminum alloy

  Sawada, M., Ichikawa, D., Borovinšek, M., Vesenjak, M. & Suzuki, S., 2021 6月, In: Materials Today Communications. 27, 102319.

  研究成果: Article › 査読

  • Aluminium Alloy 100%
  • Cells 88%
  • Aluminum alloys 79%
  • Shape 59%
  • Porosity 52%

• Effect of crystal orientation on inner surface roughness of micro metal tubes in hollow sinking

  Kishimoto, T., Suematsu, S., Sakaguchi, H., Tashima, K., Kajino, S., Gondo, S. & Suzuki, S., 2021 2月 23, In: Materials Science and Engineering A. 805, 140792.

  研究成果: Article › 査読

  • sinking 100%
  • Crystal orientation 97%
  • Crystal Orientation 90%
  • Surface Roughness 70%
  • Crystals 70%
  5 被引用数 (Scopus)

• Effects of Solidification Conditions on Grain Refinement Capacity of TiC in Directionally Solidified Ti6Al4V Alloy

  Date, N., Yamamoto, S., Watanabe, Y., Sato, H., Nakano, S., Sato, N. & Suzuki, S., 2021 8月, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 52, 8, p. 3609-3627 19 p.

  研究成果: Article › 査読

  Open Access

  • Grain Refinement 100%
  • Grain refinement 84%
  • Undercooling 79%
  • Solidification 78%
  • solidification 65%
  4 被引用数 (Scopus)

• Method for Evaluating Potential Maximum Shear Strain for a Fine Metal Wire in Torsion Testing

  Gondo, S., Akamine, H., Mitsui, R., Kajino, S., Asakawa, M., Takemoto, K., Tashima, K. & Suzuki, S., 2021 2月, In: Experimental Techniques. 45, 1, p. 25-35 11 p.

  研究成果: Article › 査読

  Open Access

  • Torsion testing 100%
  • Shear strain 71%
  • Wire 45%
  • Metals 38%
  • Torsional stress 15%
  1 被引用数 (Scopus)

• Prediction method of void distribution near punched surface of medium-carbon steel sheet using scrap

  Saito, K., Inoue, C., Ikegawa, J., Yamazaki, K., Goto, S., Takamura, M., Mihara, S. & Suzuki, S., 2021, In: isij international. 61, 1, p. 417-423 7 p.

  研究成果: Article › 査読

  Open Access

  • Steel sheet 100%
  • Carbon steel 87%
  • Punching 51%
  • Surface 29%
  • Strain 21%

• Quantitative analysis of sulfur segregation at the oxide/substrate interface in Ni-base single crystal superalloy

  Tabata, C., Kawagishi, K., Uzuhashi, J., Ohkubo, T., Hono, K., Yokokawa, T., Harada, H. & Suzuki, S., 2021 3月 15, In: Scripta Materialia. 194, 113616.

  研究成果: Article › 査読

  Open Access

  • Crucibles 100%
  • Superalloys 97%
  • Crucible 89%
  • Single crystals 86%
  • crucibles 83%
  8 被引用数 (Scopus)

• Relationship between mesoscale structure and ductility of drawn high carbon steel wire

  Gondo, S., Tanemura, R., Mitsui, R., Kajino, S., Asakawa, M., Takemoto, K., Tashima, K. & Suzuki, S., 2021 1月 7, In: Materials Science and Engineering A. 800, 140283.

  研究成果: Article › 査読

  • carbon steels 100%
  • Ductility 98%
  • ductility 82%
  • Crystalline Texture 81%
  • Carbon steel 78%
  5 被引用数 (Scopus)

• Suppressing Natural Convection for Self-diffusion Measurement in Liquid Pb Using Shear Cell Technique by Stable Density Layering of Isotopic Concentration

  Shiinoki, M., Nishimura, Y., Noboribayashi, K. & Suzuki, S., 2021 12月, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 6, p. 3846-3859 14 p.

  研究成果: Article › 査読

  • Self-Diffusion 100%
  • Natural convection 82%
  • free convection 81%
  • Shear 72%
  • shear 54%

• Temperature Dependence of CaO Desulfurization Mechanism in Molten Ni-Base Superalloy

  Kishimoto, Y., Kono, T., Horie, T., Yokokawa, T., Osawa, M., Kawagishi, K., Suzuki, S. & Harada, H., 2021 6月, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 3, p. 1450-1462 13 p.

  研究成果: Article › 査読

  • Superalloys 100%
  • Desulfurization 90%
  • Calcium oxide 88%
  • heat resistant alloys 80%
  • Molten materials 75%
  7 被引用数 (Scopus)

• The Effect of CaO-MgO Mixture on Desulfurization of Molten Ni-Base Superalloy

  Horie, T., Kono, T., Kishimoto, Y., Kawagishi, K., Suzuki, S. & Harada, H., 2021 8月, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 52, 4, p. 2687-2702 16 p.

  研究成果: Article › 査読

  • Superalloys 100%
  • Desulfurization 90%
  • Calcium oxide 88%
  • heat resistant alloys 80%
  • Molten materials 75%
  1 被引用数 (Scopus)
• 2020

  Characterization of the compressive stress drop in the plateau region in porous metals with unidirectional pores

  Sawada, M., Ichikawa, D., Borovinšek, M., Vesenjak, M., Suzuki, S. & Sawada, M., 2020 9月 1, In: Materials Transactions. 61, 9, p. 1782-1789 8 p.

  研究成果: Article › 査読

  • Compressive stress 100%
  • Cells 93%
  • plateaus 90%
  • Drop 82%
  • porosity 69%
  2 被引用数 (Scopus)

• Deformation behavior causing excessive thinning of outer diameter of micro metal tubes in hollow sinking

  Kishimoto, T., Sakaguchi, H., Suematsu, S., Tashima, K., Kajino, S., Gondo, S. & Suzuki, S., 2020 10月, In: Metals. 10, 10, p. 1-26 26 p., 1315.

  研究成果: Article › 査読

  Open Access

  • Copper Alloy 100%
  • Aluminium Alloy 81%
  • Strain 51%
  • Metals 47%
  • Unloading 46%
  4 被引用数 (Scopus)

• Desulfurization Model Using Solid CaO in Molten Ni-Base Superalloys Containing Al

  Kishimoto, Y., Utada, S., Iguchi, T., Mori, Y., Osawa, M., Yokokawa, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2020 2月 1, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 51, 1, p. 293-305 13 p.

  研究成果: Article › 査読

  • Superalloys 100%
  • Desulfurization 90%
  • Calcium oxide 88%
  • heat resistant alloys 80%
  • Molten materials 75%
  12 被引用数 (Scopus)

• Effect of surface area of grain boundaries on stress relaxation behavior in pure copper over wide range of grain sizes

  Suzuki, Y., Ueno, K., Murasawa, K., Kusuda, Y., Takamura, M., Hakoyama, T., Hama, T. & Suzuki, S., 2020 9月 9, In: Materials Science and Engineering A. 794, 139585.

  研究成果: Article › 査読

  • Stress Relaxation 100%
  • Stress relaxation 89%
  • stress relaxation 81%
  • Grain Boundary 77%
  • Grain boundaries 75%
  5 被引用数 (Scopus)

• Effects of Size and Distribution of Spheroidized Cementite on Void Initiation in the Punched Surface of Medium-Carbon Steel

  Saito, K., Inoue, C., Ikegawa, J., Yamazaki, K., Goto, S., Takamura, M., Mihara, S. & Suzuki, S., 2020 9月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 51, 9, p. 4499-4510 12 p.

  研究成果: Article › 査読

  • triaxial stresses 100%
  • cementite 97%
  • Punching 93%
  • carbon steels 89%
  • Carbon steel 70%
  3 被引用数 (Scopus)

• Melting behavior in laser powder bed fusion revealed by in situ X-ray and thermal imaging

  Wakai, Y., Ogura, T., Nakano, S., Sato, N., Kajino, S. & Suzuki, S., 2020 9月 1, In: International Journal of Advanced Manufacturing Technology. 110, 3-4, p. 1047-1059 13 p.

  研究成果: Article › 査読

  • Infrared imaging 100%
  • Melting 79%
  • X rays 76%
  • Powders 68%
  • Fusion reactions 67%
  6 被引用数 (Scopus)

• Percolation of primary crystals in cell walls of aluminum alloy foam via semi-solid route

  Takamatsu, S., Kuwahara, T., Kochi, R. & Suzuki, S., 2020 7月, In: Metals. 10, 7, p. 1-13 13 p., 847.

  研究成果: Article › 査読

  Open Access

  • Aluminium Alloy 100%
  • Crystals 90%
  • Cells 88%
  • Foams 87%
  • Foam 82%

• Stabilization mechanism of semi-solid film simulating the cell wall during fabrication of aluminum foam

  Kuwahara, T., Kaya, A., Osaka, T., Takamatsu, S. & Suzuki, S., 2020 3月, In: Metals. 10, 3, 333.

  研究成果: Article › 査読

  Open Access

  • Cells 100%
  • Foams 98%
  • Foam 93%
  • Stabilization 86%
  • Aluminum 78%
  3 被引用数 (Scopus)

• 転位速度-応力指数および転位速度係数を用いた転位速度の塑性ひずみ依存性の解明

  Ueno, K., Murasawa, K., Suzuki, Y., Takamura, M., Hama, T., Hakoyama, T. & Suzuki, S., 2020, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 84, 10, p. 326-333 8 p.

  研究成果: Article › 査読

  Open Access

  • Plastic deformation 100%
  • Velocity 94%
  • plastics 87%
  • exponents 85%
  • Strain 78%
  1 被引用数 (Scopus)
• 2019

  Analysis Method Using Two-Wavelength Mach-Zehnder Interferometer for the Measurement of Soret Coefficients in Soret-Facet Mission on ISS

  Tomaru, M., Osada, T., Orikasa, I., Suzuki, S. & Inatomi, Y., 2019 2月 1, In: Microgravity Science and Technology. 31, 1, p. 49-59 11 p.

  研究成果: Article › 査読

  • Mach-Zehnder Interferometer 100%
  • Mach-Zehnder interferometers 70%
  • Soret coefficient 69%
  • Refractive index 59%
  • International Space Station 55%
  4 被引用数 (Scopus)

• Compressive Behavior of Porous Metals with Aligned Unidirectional Pores Compressed in the Direction Perpendicular to the Pore Direction

  Tamai, T., Muto, D., Yoshida, T., Sawada, M., Suzuki, S., Vesenjak, M. & Ren, Z., 2019 1月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

  研究成果: Article › 査読

  • plastics 100%
  • Plastics 94%
  • porosity 93%
  • Strain 89%
  • Pore 84%
  2 被引用数 (Scopus)

• Compressive properties of A2024 alloy foam fabricated through a melt route and a semi-solid route

  Kuwahara, T., Osaka, T., Saito, M. & Suzuki, S., 2019, In: Metals. 9, 2, 153.

  研究成果: Article › 査読

  Open Access

  • Foams 100%
  • Foam 94%
  • Alloy 72%
  • Alloying elements 48%
  • Alloying 42%
  7 被引用数 (Scopus)

• Conditions for wall thickness reduction in hollow sinking of SUS304 tubes with drawing speed control in entrance and exit sides of die

  Kishimoto, T., Gondo, S., Takemoto, K., Tashima, K. & Suzuki, S., 2019 11月, In: Journal of Manufacturing Science and Engineering, Transactions of the ASME. 141, 10, 111008.

  研究成果: Article › 査読

  • Speed control 100%
  • Experiments 13%
  4 被引用数 (Scopus)

• Effect of primary crystals on pore morphology during semi-solid foaming of A2024 alloys

  Kuwahara, T., Saito, M., Osaka, T. & Suzuki, S., 2019 1月 1, In: Metals. 9, 1, 88.

  研究成果: Article › 査読

  Open Access

  • Crystals 100%
  • Alloy 70%
  • Pore 66%
  • Foams 12%
  • Foam 11%
  5 被引用数 (Scopus)

• Effects of TiC Addition on Directionally Solidified Microstructure of Ti6Al4V

  Yamamoto, S., Date, N., Mori, Y., Suzuki, S., Watanabe, Y., Nakano, S. & Sato, N., 2019 7月 15, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 7, p. 3174-3185 12 p.

  研究成果: Article › 査読

  • Zone melting 100%
  • Zone Melting 98%
  • Solidification 71%
  • Thermal gradients 66%
  • Molten materials 63%
  1 被引用数 (Scopus)

• Fabrication of porous metals with unidirectionally aligned pores by rod-dipping process

  Muto, D., Yoshida, T., Tamai, T., Sawada, M. & Suzuki, S., 2019, In: Materials Transactions. 60, 4, p. 544-553 10 p.

  研究成果: Article › 査読

  Open Access

  • dipping 100%
  • Plastic deformation 70%
  • rods 65%
  • Fabrication 59%
  • porosity 58%
  2 被引用数 (Scopus)

• Melting and solidification behavior of Ti-6Al-4V powder during selective laser melting

  Yamamoto, S., Azuma, H., Suzuki, S., Kajino, S., Sato, N., Okane, T., Nakano, S. & Shimizu, T., 2019 8月 1, In: International Journal of Advanced Manufacturing Technology. 103, 9-12, p. 4433-4442 10 p.

  研究成果: Article › 査読

  • Selective laser melting 100%
  • Solidification 77%
  • Powders 64%
  • Laser beam effects 39%
  • Pyrometers 38%
  20 被引用数 (Scopus)

• Microstructures and mechanical properties of fiber textures forming mesoscale structure of drawn fine high carbon steel wire

  Gondo, S., Tanemura, R., Suzuki, S., Kajino, S., Asakawa, M., Takemoto, K. & Tashima, K., 2019 2月 18, In: Materials Science and Engineering A. 747, p. 255-264 10 p.

  研究成果: Article › 査読

  • carbon steels 100%
  • Crystalline Texture 81%
  • Carbon steel 78%
  • textures 69%
  • Textures 67%
  7 被引用数 (Scopus)

• Oxidation Resistance Improvement of Ni-Base Single-Crystal Superalloy Melted in a CaO Crucible

  Sugiyama, T., Utada, S., Yokokawa, T., Osawa, M., Kawagishi, K., Suzuki, S. & Harada, H., 2019 8月 15, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 50, 8, p. 3903-3911 9 p.

  研究成果: Article › 査読

  • Crucibles 100%
  • Superalloys 97%
  • Oxidation resistance 93%
  • Crucible 89%
  • oxidation resistance 87%
  10 被引用数 (Scopus)

• Simultaneous measurement of interdiffusion and intrinsic diffusion coefficients in liquid metals on the ground

  Fukuda, H., Shiinoki, M., Nishimura, Y. & Suzuki, S., 2019 4月, In: International Journal of Heat and Mass Transfer. 133, p. 531-541 11 p.

  研究成果: Article › 査読

  • Liquid metals 100%
  • liquid metals 92%
  • Diffusion Coefficient 78%
  • diffusion coefficient 73%
  • Liquid 48%
  3 被引用数 (Scopus)
• 2018

  Creep Property and Phase Stability of Sulfur-Doped Ni-Base Single-Crystal Superalloys and Effectiveness of CaO Desulfurization

  Utada, S., Joh, Y., Osawa, M., Yokokawa, T., Sugiyama, T., Kobayashi, T., Kawagishi, K., Suzuki, S. & Harada, H., 2018 9月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 9, p. 4029-4041 13 p.

  研究成果: Article › 査読

  • Phase stability 100%
  • creep properties 96%
  • Superalloys 90%
  • Creep 85%
  • Phase Stability 84%
  18 被引用数 (Scopus)

• Determination approach of dislocation density and crystallite size using a convolutional multiple whole profile software

  Murasawa, K., Takamura, M., Kumagai, M., Ikeda, Y., Suzuki, H., Otake, Y., Hama, T. & Suzuki, S., 2018, In: Materials Transactions. 59, 7, p. 1135-1141 7 p.

  研究成果: Article › 査読

  Open Access

  • Strain Anisotropy 100%
  • Crystallite size 73%
  • Metallic Material 64%
  • Neutron Diffraction 52%
  • Diffraction patterns 47%
  6 被引用数 (Scopus)

• Directionally-solidified dendrite morphology with eight secondary arms in an FCC ordered phase alloy

  Mori, Y., Harada, H., Yokokawa, T., Kobayashi, T. & Suzuki, S., 2018 10月 15, In: Journal of Crystal Growth. 500, p. 15-22 8 p.

  研究成果: Article › 査読

  • Dendrites (metallography) 100%
  • Face-Centered Cubic Crystal System 90%
  • dendrites 89%
  • Solidification 70%
  • Alloy 59%
  1 被引用数 (Scopus)

• Effect of cementite dispersion on void formation process in spheroidize-annealed steels

  Maeda, M., Shimamura, J. & Suzuki, S., 2018 8月 15, In: isij international. 58, 8, p. 1490-1499 10 p.

  研究成果: Article › 査読

  Open Access

  • Strain 100%
  • Steel 83%
  • Long Spacing 44%
  • Electron Backscatter Diffraction 41%
  • Grain Size 26%
  6 被引用数 (Scopus)

• Establishing a simple and reliable method of measuring ductility of fine metal wire

  Gondo, S., Suzuki, S., Asakawa, M., Takemoto, K., Tashima, K. & Kajino, S., 2018 12月 1, In: International Journal of Mechanical and Materials Engineering. 13, 1, 5.

  研究成果: Article › 査読

  • Ductility 100%
  • Elongation 67%
  • Wire 63%
  • Metals 54%
  • Grippers 43%
  7 被引用数 (Scopus)

• Improvement of Strength and Energy Absorption Properties of Porous Aluminum Alloy with Aligned Unidirectional Pores Using Equal-Channel Angular Extrusion

  Yoshida, T., Muto, D., Tamai, T. & Suzuki, S., 2018 6月 1, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 6, p. 2463-2470 8 p.

  研究成果: Article › 査読

  • energy absorption 100%
  • Aluminium Alloy 97%
  • Energy absorption 96%
  • Extrusion 86%
  • aluminum alloys 82%
  2 被引用数 (Scopus)

• Reduction of Cracks During Punching Process by Cementite in High Tensile Strength Steel Sheets

  Okano, T., Inoue, C., Suzuki, S., Yamazaki, K. & Toyoda, S., 2018 1月 1, (Accepted/In press) In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.

  研究成果: Article › 査読

  • Punching 100%
  • cementite 78%
  • Steel sheet 64%
  • tensile strength 57%
  • voids 52%
  3 被引用数 (Scopus)

• Self-diffusion Measurements of Liquid Sn Using the Shear Cell Technique and Stable Density Layering

  Shiinoki, M., Hashimoto, N., Fukuda, H., Ando, Y. & Suzuki, S., 2018 12月 1, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49, 6, p. 3357-3366 10 p.

  研究成果: Article › 査読

  • Self-Diffusion 100%
  • Self-Diffusion Coefficient 82%
  • Shear 72%
  • diffusion coefficient 64%
  • shear 54%
  3 被引用数 (Scopus)
• 2017

  Publication of JIS and ISO standards for evaluation of porous and cellular metals^*

  Suzuki, S., Kobashi, M., Ono, F. & Kanetake, N., 2017, In: Keikinzoku/Journal of Japan Institute of Light Metals. 67, 11, p. 554-558 5 p.

  研究成果: Article › 査読

  Open Access

• Simple energy dissipation model of riveted lap joint in aircraft structure

  Tachi, T., Machida, S., Okada, T. & Suzuki, S., 2017, In: Transactions of the Japan Society for Aeronautical and Space Sciences. 60, 6, p. 341-346 6 p.

  研究成果: Article › 査読

  • aircraft structures 100%
  • lap joints 99%
  • Hysteresis loops 77%
  • energy dissipation 69%
  • hysteresis 65%

• Void formation by cementite and local misorientation evaluation during tensile deformation in high strength steel sheets

  Maeda, M., Shimamura, J. & Suzuki, S., 2017, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 103, 8, p. 483-490 8 p.

  研究成果: Article › 査読

  • cementite 100%
  • high strength steels 95%
  • tensile deformation 94%
  • Steel sheet 82%
  • High strength steel 79%
  2 被引用数 (Scopus)
• 2016

  Effect of sulfur on creep strength of Ni-base single-crystal superalloy, TMS-1700

  Joh, Y., Utada, S., Osawa, M., Kobayashi, T., Yokokawa, T., Kawagishi, K., Suzuki, S. & Harada, H., 2016, In: Materials Transactions. 57, 8, p. 1305-1308 4 p.

  研究成果: Article › 査読

  • Creep Strength 100%
  • Superalloys 76%
  • creep strength 74%
  • Creep 72%
  • Single crystals 67%
  8 被引用数 (Scopus)

• Phase stability of nickel-base single crystal superalloys containing iridium substituting for ruthenium

  Mori, Y., Yokokawa, T., Kobayashi, T., Harada, H. & Suzuki, S., 2016, In: Materials Transactions. 57, 10, p. 1845-1848 4 p.

  研究成果: Article › 査読

  • Ruthenium 100%
  • Iridium 97%
  • Phase stability 95%
  • Superalloys 85%
  • iridium 81%
  4 被引用数 (Scopus)