2.5-mm articulated endoluminal forceps using a compliant mechanism

Keisuke Osawa*, D. S.V. Bandara, Ryu Nakadate, Yoshihiro Nagao, Tomohiko Akahoshi, Masatoshi Eto, Jumpei Arata

*この研究の対応する著者

研究成果: Article査読

抄録

Purpose: Gastrointestinal cancer can be treated using a flexible endoscope through a natural orifice. However, treatment instruments with limited degrees of freedom (DOFs) require a highly skilled operator. Articulated devices useful for endoluminal procedures, such as endoscopic submucosal dissection and biopsy, have been developed. These devices enable dexterous operation in a narrow lumen; however, they suffer from limitations such as large size and high cost. To overcome these limitations, we developed a 2.5-mm articulated forceps that can be inserted into a standard endoscope channel based on a compliant mechanism. Methods: The compliant mechanism allows the device to be compact and affordable, which is possible due to its monolithic structure. The proposed mechanism consists of two segments, 1-DOF grasping and 2-DOF bending, that are actuated by tendon-sheath mechanisms. A prototype was designed based on finite element analysis results. Results: To confirm the effectiveness of the proposed mechanism, we fabricated the prototype using a 3D printer. A series of mechanical performance tests on the prototype revealed that it achieved the following specifications: (1) DOF: 1-DOF grasping + 2-DOF bending, (2) outer diameter: 2.5 mm, (3) length of the bending segment: 30 mm, and (4) range of motion: 0 to 20 (grasping) and -90∘ to +90∘ (bending). Finally, we performed a tissue manipulation test on an excised porcine colon and found that a piece of mucous membrane tissue was successfully resected using an electric knife while being lifted with the developed forceps. Conclusion: The results of the evaluation experiment demonstrated a positive feasibility of the proposed mechanism, which has a simpler structure compared to those of other conventional mechanisms; furthermore, it is potentially more cost-effective and is disposable. The mechanical design, prototype implementation, and evaluations are reported in this paper.

本文言語English
ジャーナルInternational Journal of Computer Assisted Radiology and Surgery
DOI
出版ステータスAccepted/In press - 2022
外部発表はい

ASJC Scopus subject areas

  • 外科
  • 生体医工学
  • 放射線学、核医学およびイメージング
  • コンピュータ ビジョンおよびパターン認識
  • コンピュータ サイエンスの応用
  • 健康情報学
  • コンピュータ グラフィックスおよびコンピュータ支援設計

フィンガープリント

「2.5-mm articulated endoluminal forceps using a compliant mechanism」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル