研究成果を検索

検索結果

• Prediction algorithm of parameters of toe clearance in the swing phase

  Miyake, T., Fujie, M. G. & Sugano, S., 2019, In: Applied Bionics and Biomechanics. 2019, 4502719.

  研究成果: Article › 査読

  Open Access
  1 被引用数 (Scopus)

• Prediction and experimental validation of cooling rate dependence of viscoplastic properties in a partially solidified state of Al-5mass%Mg alloy

  Hirohara, R., Kawada, Y., Takai, R., Otaki, M., Okane, T. & Yoshida, M., 2017, In: Keikinzoku/Journal of Japan Institute of Light Metals. 67, 6, p. 214-221 8 p.

  研究成果: Article › 査読

  Open Access

• Prediction and experimental validation of cooling rate dependence of viscoplastic properties in a partially solidified state of Al-5 mass%Mg Alloy

  Hirohara, R., Kawada, Y., Takai, R., Otaki, M., Okane, T. & Yoshida, M., 2017, In: Materials Transactions. 58, 9, p. 1299-1307 9 p.

  研究成果: Article › 査読

  Open Access
  10 被引用数 (Scopus)

• Prediction and imitation of other's motions by reusing own forward-inverse model in robots

  Ogata, T., Yokoya, R., Tani, J., Komatani, K. & Okuno, H. G., 2009 11月 2, 2009 IEEE International Conference on Robotics and Automation, ICRA '09. p. 4144-4149 6 p. 5152363. (Proceedings - IEEE International Conference on Robotics and Automation).

  研究成果: Conference contribution
  8 被引用数 (Scopus)

• Prediction and Trading in Crude Oil Markets Using Multi-Class Classification and Multi-Objective Optimization

  Deng, S., Huang, X., Shen, J., Yu, H., Wang, C., Tian, H., Ma, F. & Yang, T., 2019, In: IEEE Access. 7, p. 182860-182872 13 p., 8935159.

  研究成果: Article › 査読

  Open Access
  2 被引用数 (Scopus)

• Prediction and validation of total and regional fat mass by B-mode ultrasound in Japanese pre-pubertal children

  Midorikawa, T., Ohta, M., Hikihara, Y., Torii, S., Bemben, M. G. & Sakamoto, S., 2011 9月 28, In: British Journal of Nutrition. 106, 6, p. 944-950 7 p.

  研究成果: Article › 査読
  8 被引用数 (Scopus)

• Prediction and validation of total and regional skeletal muscle volume using B-mode ultrasonography in Japanese prepubertal children

  Midorikawa, T., Ohta, M., Hikihara, Y., Torii, S. & Sakamoto, S., 2015 8月 19, In: British Journal of Nutrition. 114, 8, p. 1209-1217 9 p.

  研究成果: Article › 査読
  8 被引用数 (Scopus)

• Prédiction de la distribution de l’écoulement diphasique dans des échangeurs de chaleur à micro-canaux à l'aide d'un réseau neuronal artificiel

  Giannetti, N., Redo, M. A., Sholahudin, Jeong, J., Yamaguchi, S., Saito, K. & Kim, H., 2020 3月, In: International Journal of Refrigeration. 111, p. 53-62 10 p.

  研究成果: Article › 査読
  23 被引用数 (Scopus)

• Prediction equations for body composition of Japanese adults by B‐mode ultrasound

  Abe, T., Kondo, M., Kawakami, Y. & Fukunaga, T., 1994, In: American Journal of Human Biology. 6, 2, p. 161-170 10 p.

  研究成果: Article › 査読
  204 被引用数 (Scopus)

• Prediction error of stochastic learning machine

  Ikeda, K., Murata, N. & Amari, S. I., 1994 12月 1, p. 1159-1162. 4 p.

  研究成果: Paper › 査読

• Prediction for swelling characteristics of compacted bentonite

  Komine, H. & Ogata, N., 1996 2月, In: Canadian geotechnical journal. 33, 1, p. 11-22 12 p.

  研究成果: Article › 査読
  174 被引用数 (Scopus)

• Prediction for thermodynamic function of dioxins for gas phase using semi-empirical molecular orbital method with PM3 Hamiltonian

  Saito, N. & Fuwa, A., 2000 1月, In: Chemosphere. 40, 2, p. 131-145 15 p.

  研究成果: Article › 査読
  44 被引用数 (Scopus)

• Prediction interval estimation of 10 second fluctuation of PV output with just-in-time modeling

  Kumekawa, N., Honma, H. & Wakao, S., 2016 11月 18, 2016 IEEE 43rd Photovoltaic Specialists Conference, PVSC 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-November. p. 1825-1830 6 p. 7749937

  研究成果: Conference contribution
  3 被引用数 (Scopus)

• Prediction interval estimation of 10 second fluctuation of PV output with just-in-time modeling

  Kumekawa, N., Honma, H. & Wakao, S., 2017, 2017 IEEE 44th Photovoltaic Specialist Conference, PVSC 2017. Institute of Electrical and Electronics Engineers Inc., p. 3494-3499 6 p. (2017 IEEE 44th Photovoltaic Specialist Conference, PVSC 2017).

  研究成果: Conference contribution

• Prediction interval estimation of 10 second PV output fluctuation in the next day

  Kumekawa, N., Homma, H. & Wakao, S., 2018 1月 1, In: IEEJ Transactions on Power and Energy. 138, 1, p. 5-13 9 p.

  研究成果: Article › 査読
  1 被引用数 (Scopus)

• Prediction interval estimation of demand curve in electric power distribution system

  Yamazaki, T., Wakao, S., Ito, H. & Sano, T., 2016, In: IEEJ Transactions on Power and Energy. 136, 12, p. 848-857 10 p.

  研究成果: Article › 査読

• Prediction Interval Estimation of Demand Curve in Electric Power Distribution System

  Yamazaki, T., Wakao, S., Ito, H. & Sano, T., 2018 1月 1, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 202, 2, p. 12-23 12 p.

  研究成果: Article › 査読
  1 被引用数 (Scopus)

• Prediction method of crack sensitivity during DC casting of Al-Mn and Al-Mg alloys

  Morishita, M., Abe, M., Tokuda, K. & Yoshida, M., 2011 2月, In: Materials Transactions. 52, 2, p. 166-172 7 p.

  研究成果: Article › 査読
  4 被引用数 (Scopus)

• Prediction method of crack sensitivity during DC casting of Al-Mn and Al-Mg series aluminum alloys

  Morishita, M., Abe, M., Tokuda, K. & Yoshida, M., 2009 8月, In: Keikinzoku/Journal of Japan Institute of Light Metals. 59, 8, p. 417-423 7 p.

  研究成果: Article › 査読
  4 被引用数 (Scopus)

• Prediction method of critical power by film flow rate measurement and subchannel analysis

  Akiba, M., Takamasa, T. & Morooka, S., 2004 7月, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 70, 695, p. 1769-1776 8 p.

  研究成果: Article › 査読
  1 被引用数 (Scopus)

• Prediction method of critical power by film flow rate measurement and subchannel analysis

  Akiba, M., Takamasa, T. & Morooka, S., 2005 7月, In: Heat Transfer - Asian Research. 34, 5, p. 309-323 15 p.

  研究成果: Article › 査読
  3 被引用数 (Scopus)

• Prediction method of void distribution near punched surface of medium-carbon steel sheet using scrap

  Saito, K., Inoue, C., Ikegawa, J., Yamazaki, K., Goto, S., Takamura, M., Mihara, S. & Suzuki, S., 2021, In: isij international. 61, 1, p. 417-423 7 p.

  研究成果: Article › 査読

  Open Access

• Prediction method of voids distribution in the punched surface of the spheroidizing annealed medium carbon steel sheet by the scrap

  Saito, K., Inoue, C., Yamazaki, K., Goto, S. & Suzuki, S., 2019, MS and T 2019 - Materials Science and Technology 2019. Materials Science and Technology, p. 929-937 9 p. (MS and T 2019 - Materials Science and Technology 2019).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Prediction model of mechanical loss in turbocharger

  Sakagami, S., Uemichi, A., Yamasaki, Y. & Kaneko, S., 2017.

  研究成果: Paper › 査読

• Prediction models of sarcopenia in japanese adult men and women

  Sanada, K., Miyachi, M., Yamamoto, K., Murakami, H., Tanimoto, M., Omori, Y., Kawano, H., Gando, Y., Hanawa, S., Iemitsu, M., Tabata, I., Higuchi, M. & Okumura, S., 2010 6月, In: Japanese Journal of Physical Fitness and Sports Medicine. 59, 3, p. 291-302 12 p.

  研究成果: Article › 査読
  8 被引用数 (Scopus)

• Prediction model to design standard production period for steel plate mills

  Shioya, M. & Uchida, K., 2017 6月 7, 2017 3rd International Conference on Control, Automation and Robotics, ICCAR 2017. Institute of Electrical and Electronics Engineers Inc., p. 346-351 6 p. 7942716

  研究成果: Conference contribution

• Prediction of a geographical shift in the prevalence of rice stripe virus disease transmitted by the small brown planthopper, Laodelphax striatellus (Fallén) (Hemiptera: Delphacidae), under global warming

  Yamamura, K. & Yokozawa, M., 2002 2月, In: Applied Entomology and Zoology. 37, 1, p. 181-190 10 p.

  研究成果: Article › 査読

  Open Access
  41 被引用数 (Scopus)

• Prediction of a turbocharger performance under pulsating flow by construction of an unsteady one-dimensional flow analysis model

  Nakamura, Y., Chinen, M., Sakakibara, M., Abe, Y. & Miyagawa, K., 2020 10月 1, In: International Journal of Fluid Machinery and Systems. 13, 4, p. 743-749 7 p.

  研究成果: Article › 査読

• Prediction of binary azeotropic temperatures by use of topological and thermodynamic conditions for combinations of azeotropes in ternary systems

  Matsuyama, H., Nakamura, Y., Tateno, S., Takeda, K. & Tsuge, Y., 2001 12月 1, In: Kagaku Kogaku Ronbunshu. 27, 4, 1 p.

  研究成果: Article › 査読

• Prediction of blade-passing frequency noise in a low specific speed centrifugal blower

  Ohta, Y., Outa, E. & Tajima, K., 1993 5月 1, In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B. 59, 561, p. 190-197 8 p.

  研究成果: Article › 査読

• Prediction of Blade-Passing Frequency Noise in a Low Specific Speed Centrifugal Blower

  Ohta, Y., Outa, E. & Tajima, K., 1993, In: Transactions of the Japan Society of Mechanical Engineers Series B. 59, 561, p. 1618-1625 8 p.

  研究成果: Article › 査読
  1 被引用数 (Scopus)

• Prediction of blast furnace operation using on-line Bayesian learning

  Kaneko, N., Sakamoto, S., Uchida, K., Ogai, H., Ito, M. & Matsuzaki, S., 2008 12月 1, 2008 International Conference on Control, Automation and Systems, ICCAS 2008. p. 2240-2245 6 p. 4694181. (2008 International Conference on Control, Automation and Systems, ICCAS 2008).

  研究成果: Conference contribution
  2 被引用数 (Scopus)

• Prediction of chaotic time series with wavelet coefficients

  Masuda, N. & Aihara, K., 2001, In: Electronics and Communications in Japan, Part III: Fundamental Electronic Science (English translation of Denshi Tsushin Gakkai Ronbunshi). 84, 6, p. 50-59 10 p.

  研究成果: Article › 査読
  4 被引用数 (Scopus)

• Prediction of Chatter Vibration by Means of a Model-Based Cutting Simulation System

  Tsai, M. D., Takata, S., Inui, M., Kimura, F. & Sata, T., 1990, In: CIRP Annals - Manufacturing Technology. 39, 1, p. 447-450 4 p.

  研究成果: Article › 査読
  41 被引用数 (Scopus)

• Prediction of CHF in concentric-tube open thermosiphon using artificial neural network and genetic algorithm

  Chen, R. H., Su, G. H., Qiu, S. Z. & Fukuda, K., 2010 3月, In: Heat and Mass Transfer/Waerme- und Stoffuebertragung. 46, 3, p. 345-353 9 p.

  研究成果: Article › 査読
  14 被引用数 (Scopus)

• Prediction of compressive strength for unidirectional fiber reinforced plastics in considering effect of strain-rate dependency on mechanical properties of constituent materials

  Inoue, N., Taniguchi, N., Nishiwaki, T., Hirayama, N., Nakamura, K., Arao, Y. & Kawada, H., 2012, In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 78, 793, p. 1284-1299 16 p.

  研究成果: Article › 査読

• Prediction of creep rupture in unidirectional composite: Creep rupture model with interfacial debonding and its propagation

  Koyanagi, J., Kiyota, G., Kamiya, T. & Kawada, H., 2004 12月 1, In: Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials. 13, 3-4, p. 199-213 15 p.

  研究成果: Article › 査読
  20 被引用数 (Scopus)

• Prediction of creep rupture in unidirectional composites

  Koyanagi, J., Ogawa, F. & Kawada, H., 2005 12月 1, Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. p. 1857-1863 7 p. (Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics).

  研究成果: Conference contribution

• Prediction of de-NOx performance using monolithic SCR catalyst under load following operation of natural gas-fired combined cycle power plants

  Nakamura, K., Muramatsu, T., Ogawa, T. & Nakagaki, T., 2020, p. 2307-2317. 11 p.

  研究成果: Paper › 査読

• Prediction of de-NOx performance using monolithic SCR catalyst under load following operation of natural gas-fired combined cycle power plants

  Nakamura, K., Muramatsu, T., Ogawa, T. & Nakagaki, T., 2021 7月 15, In: Energy. 227, 120383.

  研究成果: Article › 査読

  Open Access
  7 被引用数 (Scopus)

• Prediction of dew condensation of windows with airflow

  Kawahara, D. & Kato, S., 2015 11月 1, In: Energy Procedia. 78, p. 519-524 6 p.

  研究成果: Conference article › 査読

  Open Access
  2 被引用数 (Scopus)

• Prediction of dose distribution from luminescence image of water using a deep convolutional neural network for particle therapy

  Yabe, T., Yamamoto, S., Oda, M., Mori, K., Toshito, T. & Akagi, T., 2020 9月 1, In: Medical Physics. 47, 9, p. 3882-3891 10 p.

  研究成果: Article › 査読
  4 被引用数 (Scopus)

• Prediction of Elementary Reaction Mechanism for the CVD Process in Si₂Cl₆-H₂ System using Semi-Empirical Molecular Orbital Method

  Saito, N. & Fuwa, A., 1999, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 63, 3, p. 319-325 7 p.

  研究成果: Article › 査読

• Prediction of energy efficiency and thermal environment of residential buildings utilizing PEFC-CGS combined floor heating system

  Ayagaki, N., Ozaki, A., Takaguchi, H., Kuroki, H. & Watanabe, T., 2007 12月 1, p. 546-553. 8 p.

  研究成果: Paper › 査読
  1 被引用数 (Scopus)

• Prediction of fire exposure and characterization of the burning behavior of wood for the design of a heavy timber "fireproof building" under localized fire scenario

  Inaba, S., Hasemi, Y., Tsuchiya, S., Yasui, N., Yoshida, M. & Kawamura, N., 2007.

  研究成果: Paper › 査読

• Prediction of fire resistance of Japanese bare timber soil walls

  Shimizu, M., Hasemi, Y., Yasui, N., Murakami, M. & Kimura, T., 2005 12月 1.

  研究成果: Paper › 査読
  1 被引用数 (Scopus)

• Prediction of first transverse crack formation in cross-ply CFRP laminates under fatigue loading

  Hosoi, A., Kurihara, K., Sato, N. & Kawada, H., 2012 12月 1, 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today. p. 173-178 6 p. (8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today; vol. 1).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Prediction of flame spread along a wooden surface of wall against localized fire

  Harada, K., Hirai, N., Hasemi, Y., Fujita, K. & Inoue, M., 2014.

  研究成果: Paper › 査読

• Prediction of flame spread along a wooden surface of wall against localized fire

  Harada, K., Hirai, N., Hasemi, Y., Fujita, K. & Inoue, M., 2014, WCTE 2014 - World Conference on Timber Engineering, Proceedings. World Conference on Timber Engineering (WCTE)

  研究成果: Conference contribution

• Prediction of fluid forces acting on a hand model in unsteady flow conditions

  Kudo, S., Yanai, T., Wilson, B., Takagi, H. & Vennell, R., 2008, In: Journal of Biomechanics. 41, 5, p. 1131-1136 6 p.

  研究成果: Article › 査読
  19 被引用数 (Scopus)