研究成果を検索

検索結果

• Design of an anti-slip mechanism for wheels of step climbing robots

  Baishya, N. J., Bhattacharya, B., Ogai, H. & Tatsumi, K., 2021 10月, In: Actuators. 10, 10, 259.

  研究成果: Article › 査読

  Open Access
  1 被引用数 (Scopus)

• Design of a motion-based gestural menu-selection interface for a self-portrait camera

  Chu, S. & Tanaka, J., 2015 2月, In: Personal and Ubiquitous Computing. 19, 2, p. 415-424 10 p.

  研究成果: Article › 査読
  2 被引用数 (Scopus)

• Design of a mode separated RF photo cathode gun

  Deshpande, A., Araki, S., Fukuda, M., Sakaue, K., Terunuma, N., Urakawa, J., Sasao, N. & Washio, M., 2009 3月 1, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 600, 2, p. 361-366 6 p.

  研究成果: Article › 査読
  20 被引用数 (Scopus)

• Design of a mastication robot mechanism using a human skull model

  Takanobu, H., Takanishi, A. & Kato, I., 1993 12月 1, 1993 International Conference on Intelligent Robots and Systems. Anon (ed.). Publ by IEEE, p. 203-208 6 p. (1993 International Conference on Intelligent Robots and Systems).

  研究成果: Conference contribution
  25 被引用数 (Scopus)

• Design of a mass transport surface utilizing peristaltic motion of a self-oscillating gel

  Murase, Y., Maeda, S., Hashimoto, S. & Yoshida, R., 2009 1月 6, In: Langmuir. 25, 1, p. 483-489 7 p.

  研究成果: Article › 査読
  120 被引用数 (Scopus)

• Design of alumina/alumina laminate composites with crystalline-orientated layers produced by electrophoretic deposition under a high magnetic field

  Uchikoshi, T., Suzuki, T. S., Okuyama, H. & Sakka, Y., 2006 1月 1, In: Key Engineering Materials. 314, p. 25-30 6 p.

  研究成果: Article › 査読

• Design of a Luenberger observer based sensorless multi-loop control for boost converters

  Li, X., Chen, M., Hirofumi, S. & Tsutomu, Y., 2016 9月 7, International Conference on Electronics, Information, and Communications, ICEIC 2016. Institute of Electrical and Electronics Engineers Inc., 7563030. (International Conference on Electronics, Information, and Communications, ICEIC 2016).

  研究成果: Conference contribution

• Design of a low vulnerability electronic fiber optic seal system

  Di, Y., Zhang, Q., Zuo, G., Han, F., Chen, R., Huo, Y. & Xu, P., 2013, International Conference on Nuclear Engineering, Proceedings, ICONE. American Society of Mechanical Engineers (ASME), Vol. 3.

  研究成果: Conference contribution

• Design of a low-order sensorless controller by robust H∞ control for boost converters

  Li, X., Chen, M., Shinohara, H. & Yoshihara, T., 2016 5月, In: Journal of Power Electronics. 16, 3, p. 1025-1035 11 p.

  研究成果: Article › 査読
  2 被引用数 (Scopus)

• Design of a kirigami structure with a large uniform deformation region

  Taniyama, H. & Iwase, E., 2021 1月, In: Micromachines. 12, 1, p. 1-14 14 p., 76.

  研究成果: Article › 査読

  Open Access
  1 被引用数 (Scopus)

• Design of a high-current ac downlink using Bi-based superconductors

  Fisher, B. L., Lanagan, M. T., Balachandran, U., Honjo, S. & Hara, T., 1997, In: IEEE Transactions on Applied Superconductivity. 7, 2 PART 1, p. 711-714 4 p.

  研究成果: Article › 査読
  2 被引用数 (Scopus)

• Design of a hardware track finder (Fast Tracker) for the ATLAS trigger

  Cavaliere, V., Adelman, J., Albicocco, P., Alison, J., Ancu, L. S., Anderson, J., Andari, N., Andreani, A., Andreazza, A., Annovi, A., Antonelli, M., Asbah, N., Atkinson, M., Baines, J., Barberio, E., Beccherle, R., Beretta, M., Bertolucci, F., Biesuz, N. V., Blair, R., & 90 othersBogdan, M., Boveia, A., Britzger, D., Bryant, P., Burghgrave, B., Calderini, G., Camplani, A., Cavasinni, V., Chakraborty, D., Chang, P., Cheng, Y., Citraro, S., Citterio, M., Crescioli, F., Dawe, N., Dell'Orso, M., Donati, S., Dondero, P., Drake, G., Gadomski, S., Gatta, M., Gentsos, C., Giannetti, P., Gkaitatzis, S., Gramling, J., Howarth, J. W., Iizawa, T., Ilic, N., Jiang, Z., Kaji, T., Kasten, M., Kawaguchi, Y., Kim, Y. K., Kimura, N., Klimkovich, T., Kolb, M., Kordas, K., Krizka, K., Kubota, T., Lanza, A., Li, H. L., Liberali, V., Lisovyi, M., Liu, L., Love, J., Luciano, P., Luongo, C., Magalotti, D., Maznas, I., Meroni, C., Mitani, T., Nasimi, H., Negri, A., Neroutsos, P., Neubauer, M., Nikolaidis, S., Okumura, Y., Pandini, C., Petridou, C., Piendibene, M., Proudfoot, J., Rados, P., Roda, C., Rossi, E., Sakurai, Y., Sampsonidis, D., Saxon, J., Schmitt, S., Schoening, A., Shochet, M., Shojaii, S., Soltveit, H., Sotiropoulou, C. L., Stabile, A., Swiatlowski, M., Tang, F., Taylor, P. T., Testa, M., Tompkins, L., Vercesi, V., Volpi, G., Wang, R., Watari, R., Webster, J., Wu, X., Yorita, K., Yurkewicz, A., Zeng, J. C., Zhang, J. & Zou, R., 2016 2月 18, In: Journal of Instrumentation. 11, 2, C02056.

  研究成果: Article › 査読

  Open Access
  5 被引用数 (Scopus)

• Design of a GMPLS control plane with PCE-based impairment-aware full restoration capability for translucent WSON: Enabling techniques, service demonstration, and performance evaluation

  Liu, L., Tsuritani, T., Casellas, R., Morita, I., Martínez, R. & Muñoz, R., 2013 1月, In: Optical Switching and Networking. 10, 1, p. 16-31 16 p.

  研究成果: Article › 査読
  3 被引用数 (Scopus)

• Design of a Global Decision Support System for a manufacturing SME: Towards participating in Collaborative Manufacturing

  Lin, H. W., Nagalingam, S. V., Kuik, S. S. & Murata, T., 2012 3月, In: International Journal of Production Economics. 136, 1, p. 1-12 12 p.

  研究成果: Article › 査読
  45 被引用数 (Scopus)

• Design of a global car production-logistics system for a future ASEAN-China region

  Katayama, H., 1999, In: International Journal of Operations and Production Management. 19, 5-6, p. 582-603 22 p.

  研究成果: Article › 査読
  17 被引用数 (Scopus)

• Design of a Discrete Element Method Parameter Identification System for the Efficient Excavation of Mining Shovels Based on Excavation Resistance Analysis

  Iwata, H., Yu, S., Mizushima, S. & Yamamura, S., 2022 5月, In: International Journal of Mechanical Engineering and Robotics Research. 11, 5, p. 304-310 7 p.

  研究成果: Article › 査読

  Open Access

• Design of a conduction-cooled 9.4 T REBCO magnet for whole-body MRI systems

  Miyazaki, H., Iwai, S., Otani, Y., Takahashi, M., Tosaka, T., Tasaki, K., Nomura, S., Kurusu, T., Ueda, H., Noguchi, S., Ishiyama, A., Urayama, S. & Fukuyama, H., 2016 8月 12, In: Superconductor Science and Technology. 29, 10, 104001.

  研究成果: Article › 査読
  38 被引用数 (Scopus)

• Design of a computational model for social learning support and analystics

  Yen, N. Y., Hung, J. C., Chen, C. C. & Jin, Q., 2019 3月, In: Computers in Human Behavior. 92, p. 547-561 15 p.

  研究成果: Article › 査読
  3 被引用数 (Scopus)

• Design of a chirping cell attached rf gun for ultra-short electron bunch generation

  Sakaue, K., Tamai, K., Washio, M. & Urakawa, J., 2011 12月 1, IPAC 2011 - 2nd International Particle Accelerator Conference. p. 1129-1131 3 p. (IPAC 2011 - 2nd International Particle Accelerator Conference).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Design of a battery-powered multi-purpose bipedal locomotor with parallel mechanism

  Sugahara, Y., Endo, T., Lim, H. O. & Takanishi, A., 2002, p. 2658-2663. 6 p.

  研究成果: Paper › 査読
  52 被引用数 (Scopus)

• Design of a 3-D vision system based on geometric knowledge

  Dohi, H. & Ishizuka, M., 1989, Proc Int Workshop Ind Appl Machine Intell Vision. Anon (ed.). Piscataway, NJ, United States: Publ by IEEE, p. 217-222 6 p.

  研究成果: Conference contribution

• Design of a 300-mV 2.4-GHz receiver using transformer-Coupled techniques

  Zhang, F., Miyahara, Y. & Otis, B. P., 2013 12月, In: IEEE Journal of Solid-State Circuits. 48, 12, p. 3190-3205 16 p., 6613557.

  研究成果: Article › 査読
  36 被引用数 (Scopus)

• Design of a 1 kW class gamma type Stirling engine

  Raggi, L., Katsuta, M. & Sekiya, H., 1997 1月 1, In: Proceedings of the Intersociety Energy Conversion Engineering Conference. 2, p. 991-996 6 p.

  研究成果: Conference article › 査読
  2 被引用数 (Scopus)

• Design of a 128-mb SOI DRAM using the floating body cell (FBC)

  Ohsawa, T., Fujita, K., Hatsuda, K., Higashi, T., Shino, T., Minami, Y., Nakajima, H., Morikado, M., Inoh, K., Hamamoto, T., Watanabe, S., Fujii, S. & Furuyama, T., 2006 1月, In: IEEE Journal of Solid-State Circuits. 41, 1, p. 135-145 11 p.

  研究成果: Article › 査読
  14 被引用数 (Scopus)

• Design of 16S rRNA-targeted oligonucleotide probes and microbial community analysis in the denitrification process of a saline industrial wastewater treatment system

  Yoshie, S., Noda, N., Tsuneda, S., Hirata, A. & Inamori, Y., 2004 6月 1, In: FEMS Microbiology Letters. 235, 1, p. 183-189 7 p.

  研究成果: Article › 査読
  12 被引用数 (Scopus)

• Design Modification of Greenhouse Effect Solar-Hybrid Rack Type Dryer

  Wulandani, D., Agustina, S. E., Yulianto, M., Nelwan, L. O. & Rahman, L. M., 2019 6月 28, In: IOP Conference Series: Materials Science and Engineering. 557, 1, 012054.

  研究成果: Conference article › 査読

  Open Access

• Design methodology using topology optimization for anti-vibration reinforcement of generators in a ship's engine room

  Daifuku, M., Nishizu, T., Takezawa, A., Kitamura, M., Terashita, H. & Ohtsuki, Y., 2016 2月 1, In: Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment. 230, 1, p. 216-226 11 p.

  研究成果: Article › 査読
  3 被引用数 (Scopus)

• Design methodology of total timber 2-hour fire-resistive structural beam on sacrifice layer concept

  Aoyama, G., Hasemi, Y., Hokibara, T., Saiyoshi, T., Kamikawa, D., Takase, R. & Suzuki, J. I., 2021.

  研究成果: Paper › 査読

• Design methodology of process variation tolerant D-Flip-Flops for low voltage circuit operation

  Nishizawa, S., Ishihara, T. & Onodera, H., 2014 11月 5, International System on Chip Conference. Sridhar, R., Zhao, D., Shi, K. & Buchner, T. (eds.). IEEE Computer Society, p. 42-47 6 p. 6948897. (International System on Chip Conference).

  研究成果: Conference contribution
  2 被引用数 (Scopus)

• Design methodology of piezoelectric energy-harvesting skin using topology optimization

  Takezawa, A., Kitamura, M., Vatanabe, S. L. & Silva, E. C. N., 2014 2月, In: Structural and Multidisciplinary Optimization. 49, 2, p. 281-297 17 p.

  研究成果: Article › 査読
  35 被引用数 (Scopus)

• Design methodology of magnetic fields and structures for magneto-mechanical resonator based on topology optimization

  Takezawa, A., Lee, J. & Kitamura, M., 2018 3月 1, In: Optimization and Engineering. 19, 1, p. 19-38 20 p.

  研究成果: Article › 査読
  2 被引用数 (Scopus)

• Design methodology of embedded DRAM with virtual-socket architecture

  Yamauchi, T., Kinoshita, M., Amano, T., Dosaka, K., Arimoto, K., Ozaki, H., Yamada, M. & Yoshihara, T., 2001 1月, In: IEEE Journal of Solid-State Circuits. 36, 1, p. 46-54 9 p.

  研究成果: Article › 査読
  4 被引用数 (Scopus)

• Design methodology of a robust ESD protection circuit for STI process 256 Mb NAND flash memory

  Ikehashi, T., Imamiya, K. & Sakui, K., 1999 12月 1, Electrical Overstress/Electrostatic Discharge Symposium Proceedings. ESD Assoc, p. 225-234 10 p. (Electrical Overstress/Electrostatic Discharge Symposium Proceedings).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Design methodology of a robust esd protection circuit for sti process 256 mb nand flash memory

  Ikehashi, T., Imamiya, K. & Sakui, K., 2000, In: IEEE Transactions on Electronics Packaging Manufacturing. 23, 4, p. 235 1 p.

  研究成果: Article › 査読

• Design methodology of a robust bsd protection circuit for sti process 256 mb nand flash memory

  Ikehashi, T., Imamiya, K. & Sakui, K., 2000, In: IEEE Transactions on Electronics Packaging Manufacturing. 23, 4, p. 246-254 9 p.

  研究成果: Article › 査読

• Design methodology for variation tolerant d-flip-flop using regression analysis

  Nishizawa, S. & Onodera, H., 2018 12月, In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences. E101A, 12, p. 2222-2230 9 p.

  研究成果: Article › 査読

• Design methodology for porous composites with tunable thermal expansion produced by multi-material topology optimization and additive manufacturing

  Takezawa, A. & Kobashi, M., 2017 12月 15, In: Composites Part B: Engineering. 131, p. 21-29 9 p.

  研究成果: Article › 査読
  89 被引用数 (Scopus)

• Design methodology for mass reduction of a mechanical product by extracting minimum structure

  Fukushige, S., Taniyama, S. & Umeda, Y., 2007.

  研究成果: Paper › 査読
  1 被引用数 (Scopus)

• Design methodology for analog high frequency ICs

  Miyahara, Y., Oumi, Y. & Moriyama, S., 1996, In: Proceedings - Design Automation Conference. p. 503-508 6 p.

  研究成果: Conference article › 査読
  3 被引用数 (Scopus)

• Design Method of the Wheel Slip Speed Feedback Controller and Phase Lead Compensator in Locomotives

  Aihara, M., Nagataki, M., Kondo, K. & Yamazaki, O., 2022, In: IEEJ Journal of Industry Applications. 11, 5, p. 686-695 10 p.

  研究成果: Article › 査読

  Open Access

• Design method of network operating systems based on the concept of an object

  Takahashi, K., Ohta, Y., Shiratori, N. & Noguchi, S., 1989 12月, In: Systems and Computers in Japan. 20, 12, p. 58-70 13 p.

  研究成果: Article › 査読

• Design method of material handling systems for lean automation-Integrating equipment for reducing wasted waiting time

  Yamazaki, Y., Shigematsu, K., Kato, S., Kojima, F., Onari, H. & Takata, S., 2017, (Accepted/In press) In: CIRP Annals - Manufacturing Technology.

  研究成果: Article › 査読
  16 被引用数 (Scopus)

• Design method of intelligent interface for minimizing the number of questions and answers

  Suzuki, J., Matsushima, T., Hirasawa, S. & Inazumi, H., 1988 9月 1, In: Bulletin of Centre for Informatics (Waseda University). 8, p. 41-48 8 p.

  研究成果: Article › 査読

• DESIGN METHOD OF HIGHLY RELIABLE COMMUNICATION NETWORK BY THE USE OF MATRIX CALCULATION.

  Tanaka, Y., Fan, R. X. & Akiyama, M., 1988 3月 1, In: Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi). 71, 3, p. 120-125 6 p.

  研究成果: Article › 査読

• Design method of fault diagnosis of flowmeters using historical database - Evaluation based on probabilities of false-alarm and miss-alarm

  Tateno, S., Sui, F. & Matsuyama, H., 2007 12月 1, ICCAS 2007 - International Conference on Control, Automation and Systems. p. 2523-2527 5 p. 4406789. (ICCAS 2007 - International Conference on Control, Automation and Systems).

  研究成果: Conference contribution

• Design method of a frequency domain based power controller for overhead line and electric double layer capacitor hybrid railway vehicles

  Saito, T. & Kondo, K., 2015 10月 1, In: ieej transactions on industry applications. 135, 10, p. 1049-1050 2 p.

  研究成果: Article › 査読

• Design method considering the frequency band of the disturbance in the DC link voltage control system of hybrid electric vehicle driving systems

  Heo, J. & Kondo, K., 2019 11月 1, In: Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi). 209, 1-2, p. 40-52 13 p.

  研究成果: Article › 査読
  1 被引用数 (Scopus)

• Design issues of ambient social media for better decision making

  Nakajima, T. & Yamabe, T., 2011 11月 7, Electronic Proceedings of the 2011 IEEE International Conference on Multimedia and Expo, ICME 2011. 6012154. (Proceedings - IEEE International Conference on Multimedia and Expo).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Design issues in composition kernels for highly functional embedded systems

  Shimada, H., Kinebuchi, Y., Lin, T. H., Courbot, A. & Nakajima, T., 2011 6月 23, 26th Annual ACM Symposium on Applied Computing, SAC 2011. p. 338-345 8 p. (Proceedings of the ACM Symposium on Applied Computing).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Design issues and experiences from having lessons in text-based social virtual reality environments

  Jin, Q. & Yano, Y., 1997 12月 1, In: Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. 2, p. 1418-1423 6 p.

  研究成果: Conference article › 査読
  2 被引用数 (Scopus)