検索コンセプト
|
選択されたフィルタ
|
検索結果
-
Conference contribution
Precise Information Retrieval Exploiting Predicate-Argument Structures
Kawahara, D., Shinzato, K., Shibata, T. & Kurohashi, S., 2013, 6th International Joint Conference on Natural Language Processing, IJCNLP 2013 - Proceedings of the Main Conference. Mitkov, R. & Park, J. C. (eds.). Asian Federation of Natural Language Processing, p. 37-45 9 p. (6th International Joint Conference on Natural Language Processing, IJCNLP 2013 - Proceedings of the Main Conference).研究成果: Conference contribution
4 被引用数 (Scopus) -
Precise lightwave control for high-speed wired and wireless transmission
Kawanishi, T., 2012 12月 1, Proceedings - ICOCN 2012: 2012 11th International Conference on Optical Communications and Networks. 6486242. (Proceedings - ICOCN 2012: 2012 11th International Conference on Optical Communications and Networks).研究成果: Conference contribution
-
Precise lightwave modulation for digital and analogue optical communications
Kawanishi, T., 2013 11月 29, 2013 IEEE 6th International Conference on Advanced Infocomm Technology, ICAIT 2013. p. 207-208 2 p. 6621559. (2013 IEEE 6th International Conference on Advanced Infocomm Technology, ICAIT 2013).研究成果: Conference contribution
-
Precisely synchronized two mode-locked lasers with optical phase-locked loop
Nagaoka, H., Miura, T., Kannari, F., Takasago, K., Torizuka, K. & Washio, M., 2001, Advanced Solid State Lasers, ASSL 2001. Optica Publishing Group (formerly OSA), p. 429-434 6 p. (Optics InfoBase Conference Papers).研究成果: Conference contribution
-
Precise point positioning for mobile robots using software GNSS receiver and QZSS LEX signal
Suzuki, T. & Kubo, N., 2013, IEEE International Conference on Intelligent Robots and Systems. p. 369-375 7 p. 6696378研究成果: Conference contribution
13 被引用数 (Scopus) -
Precise road line localization using single camera and 3D road model
Ishikawa, K., Onishi, T., Amano, Y., Hashizume, T., Takiguchi, J. I. & Yoneyama, S., 2006, 2006 Proceedings of the 23rd International Symposium on Robotics and Automation in Construction, ISARC 2006. p. 675-680 6 p. (2006 Proceedings of the 23rd International Symposium on Robotics and Automation in Construction, ISARC 2006).研究成果: Conference contribution
1 被引用数 (Scopus) -
Precise timing verification of logic circuits under combined delay model
Kimura, S., Kashima, S. & Haneda, H., 1992 1月 1, IEEE/ACM International Conference on Computer-Aided Design. Publ by IEEE, p. 526-529 4 p. (IEEE/ACM International Conference on Computer-Aided Design).研究成果: Conference contribution
-
Precise UAV position and attitude estimation by multiple GNSS receivers for 3D mapping
Suzuki, T., Takahashi, Y. & Amano, Y., 2016, 29th International Technical Meeting of the Satellite Division of the Institute of Navigation, ION GNSS 2016. Institute of Navigation, Vol. 2. p. 1455-1464 10 p.研究成果: Conference contribution
8 被引用数 (Scopus) -
Precise volume controlled multireagents injective microwell array for efficient cell function analysis
Shibata, Y., Kawai, K., Kanai, M. & Shoji, S., 2009 1月 1, Proceedings of Conference, MicroTAS 2009 - The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences. Chemical and Biological Microsystems Society, p. 1488-1490 3 p. (Proceedings of Conference, MicroTAS 2009 - The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences).研究成果: Conference contribution
4 被引用数 (Scopus) -
Precision-at-ten considered redundant
Webber, W., Moffat, A., Zobel, J. & Sakai, T., 2008, ACM SIGIR 2008 - 31st Annual International ACM SIGIR Conference on Research and Development in Information Retrieval, Proceedings. p. 695-696 2 p. (ACM SIGIR 2008 - 31st Annual International ACM SIGIR Conference on Research and Development in Information Retrieval, Proceedings).研究成果: Conference contribution
29 被引用数 (Scopus) -
Precision micro-fabrication by gelatin patterning with electrostatically-injected droplet (ELID) method
Umezu, S., Kawanishi, M., Ohmori, H., Kitajima, T. & Ito, Y., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. Shore, P., Burke, T., Spaan, H. & Van Brussel, H. (eds.). euspen, p. 404-407 4 p. (Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010; vol. 2).研究成果: Conference contribution
-
Pre-cooling operation aiming for demand response adaptation in house
Kim, J., Oki, R., Akimoto, M., Tanabe, S. I., Hayashi, Y. & Morito, N., 2020, 16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020. International Society of Indoor Air Quality and Climate, (16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020).研究成果: Conference contribution
-
Predicting and learning executability of composite Web services
Tanaka, M. & Ishida, T., 2008, Service-Oriented Computing - ICSOC 2008 - 6th International Conference, Proceedings. Springer Verlag, p. 572-578 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5364 LNCS).研究成果: Conference contribution
Open Access3 被引用数 (Scopus) -
Predicting ASR errors by exploiting barge-in rate of individual users for spoken dialogue systems
Komatani, K., Kawahara, T. & Okuno, H. G., 2008, Proceedings of the Annual Conference of the International Speech Communication Association, INTERSPEECH. p. 183-186 4 p.研究成果: Conference contribution
6 被引用数 (Scopus) -
Predicting japanese scrambling in the wild
Orita, N., 2017, CMCL 2017 - Cognitive Modeling and Computational Linguistics at the 15th Conference of the European Chapter of the Association for Computational Linguistics, EACL 2017 - Proceedings. Gibson, T., Linzen, T., Sayeed, A., van Schijndel, M. & Schuler, W. (eds.). Association for Computational Linguistics (ACL), p. 41-45 5 p. (CMCL 2017 - Cognitive Modeling and Computational Linguistics at the 15th Conference of the European Chapter of the Association for Computational Linguistics, EACL 2017 - Proceedings).研究成果: Conference contribution
-
Predicting listener back-channels for human-agent interaction using neuro-dynamical model
Sano, S., Nishide, S., Okuno, H. G. & Ogata, T., 2011, 2011 IEEE/SICE International Symposium on System Integration, SII 2011. p. 18-23 6 p. 6147412. (2011 IEEE/SICE International Symposium on System Integration, SII 2011).研究成果: Conference contribution
1 被引用数 (Scopus) -
Predicting native language from gaze
Berzak, Y., Nakamura, C., Flynn, S. & Katz, B., 2017, ACL 2017 - 55th Annual Meeting of the Association for Computational Linguistics, Proceedings of the Conference (Long Papers). Association for Computational Linguistics (ACL), p. 541-551 11 p. (ACL 2017 - 55th Annual Meeting of the Association for Computational Linguistics, Proceedings of the Conference (Long Papers); vol. 1).研究成果: Conference contribution
Open Access5 被引用数 (Scopus) -
Predicting network outages based on Q-drop in optical network
Hasegawa, Y. & Uchida, M., 2019 7月, Proceedings - 2019 IEEE 43rd Annual Computer Software and Applications Conference, COMPSAC 2019. Getov, V., Gaudiot, J-L., Yamai, N., Cimato, S., Chang, M., Teranishi, Y., Yang, J-J., Leong, H. V., Shahriar, H., Takemoto, M., Towey, D., Takakura, H., Elci, A., Takeuchi, S. & Puri, S. (eds.). IEEE Computer Society, p. 258-263 6 p. 8754055. (Proceedings - International Computer Software and Applications Conference; vol. 1).研究成果: Conference contribution
1 被引用数 (Scopus) -
Predicting object dynamics from visual images through active sensing experiences
Nishide, S., Ogata, T., Tani, J., Komatani, K. & Okuno, H. G., 2007 11月 27, 2007 IEEE International Conference on Robotics and Automation, ICRA'07. p. 2501-2506 6 p. 4209459. (Proceedings - IEEE International Conference on Robotics and Automation).研究成果: Conference contribution
7 被引用数 (Scopus) -
Predicting release time based on Generalized Software Reliability Model (GSRM)
Honda, K., Washizaki, H. & Fukazawa, Y., 2014 9月 15, Proceedings - International Computer Software and Applications Conference. IEEE Computer Society, p. 604-605 2 p. 6899270研究成果: Conference contribution
7 被引用数 (Scopus) -
Predicting Release Time for Open Source Software Based on the Generalized Software Reliability Model
Washizaki, H., Honda, K. & Fukazawa, Y., 2015 9月 29, Proceedings - 2015 Agile Conference, Agile 2015. Institute of Electrical and Electronics Engineers Inc., p. 76-81 6 p. 7284601研究成果: Conference contribution
11 被引用数 (Scopus) -
Predicting the evocation relation between lexicalized concepts
Hayashi, Y., 2016, COLING 2016 - 26th International Conference on Computational Linguistics, Proceedings of COLING 2016: Technical Papers. Association for Computational Linguistics, ACL Anthology, p. 1657-1668 12 p. (COLING 2016 - 26th International Conference on Computational Linguistics, Proceedings of COLING 2016: Technical Papers).研究成果: Conference contribution
5 被引用数 (Scopus) -
Predicting time range of development based on generalized software reliability model
Honda, K., Nakai, H., Washizaki, H., Fukazawa, Y., Asoh, K., Takahashi, K., Ogawa, K., Mori, M., Hino, T., Hayakawa, Y., Tanaka, Y., Yamada, S. & Miyazaki, D., 2014, Proceedings - 21st Asia-Pacific Software Engineering Conference, APSEC 2014. Gueheneuc, Y-G., Kwon, G. & Cha, S. (eds.). IEEE Computer Society, p. 351-358 8 p. 7091330. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; vol. 1).研究成果: Conference contribution
12 被引用数 (Scopus) -
Predicting various types of user attributes in Twitter by using personalized pagerank
Uesato, K., Asai, H. & Yamana, H., 2015 12月 22, Proceedings - 2015 IEEE International Conference on Big Data, IEEE Big Data 2015. Luo, F., Ogan, K., Zaki, M. J., Haas, L., Ooi, B. C., Kumar, V., Rachuri, S., Pyne, S., Ho, H., Hu, X., Yu, S., Hsiao, M. H-I. & Li, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 2825-2827 3 p. 7364090. (Proceedings - 2015 IEEE International Conference on Big Data, IEEE Big Data 2015).研究成果: Conference contribution
1 被引用数 (Scopus) -
Prediction, measurement and stabilization of structural deformation on orbit
Ishimura, K., Senba, A., Iwasa, T., Ogi, Y., Akita, T., Furuya, H. & Minesugi, K., 2010, 61st International Astronautical Congress 2010, IAC 2010. p. 6116-6121 6 p. (61st International Astronautical Congress 2010, IAC 2010; vol. 8).研究成果: Conference contribution
3 被引用数 (Scopus) -
Prediction and imitation of other's motions by reusing own forward-inverse model in robots
Ogata, T., Yokoya, R., Tani, J., Komatani, K. & Okuno, H. G., 2009 11月 2, 2009 IEEE International Conference on Robotics and Automation, ICRA '09. p. 4144-4149 6 p. 5152363. (Proceedings - IEEE International Conference on Robotics and Automation).研究成果: Conference contribution
8 被引用数 (Scopus) -
Prediction interval estimation of 10 second fluctuation of PV output with just-in-time modeling
Kumekawa, N., Honma, H. & Wakao, S., 2017, 2017 IEEE 44th Photovoltaic Specialist Conference, PVSC 2017. Institute of Electrical and Electronics Engineers Inc., p. 3494-3499 6 p. (2017 IEEE 44th Photovoltaic Specialist Conference, PVSC 2017).研究成果: Conference contribution
-
Prediction interval estimation of 10 second fluctuation of PV output with just-in-time modeling
Kumekawa, N., Honma, H. & Wakao, S., 2016 11月 18, 2016 IEEE 43rd Photovoltaic Specialists Conference, PVSC 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-November. p. 1825-1830 6 p. 7749937研究成果: Conference contribution
3 被引用数 (Scopus) -
Prediction method of voids distribution in the punched surface of the spheroidizing annealed medium carbon steel sheet by the scrap
Saito, K., Inoue, C., Yamazaki, K., Goto, S. & Suzuki, S., 2019, MS and T 2019 - Materials Science and Technology 2019. Materials Science and Technology, p. 929-937 9 p. (MS and T 2019 - Materials Science and Technology 2019).研究成果: Conference contribution
1 被引用数 (Scopus) -
Prediction model to design standard production period for steel plate mills
Shioya, M. & Uchida, K., 2017 6月 7, 2017 3rd International Conference on Control, Automation and Robotics, ICCAR 2017. Institute of Electrical and Electronics Engineers Inc., p. 346-351 6 p. 7942716研究成果: Conference contribution
-
Prediction of blast furnace operation using on-line Bayesian learning
Kaneko, N., Sakamoto, S., Uchida, K., Ogai, H., Ito, M. & Matsuzaki, S., 2008 12月 1, 2008 International Conference on Control, Automation and Systems, ICCAS 2008. p. 2240-2245 6 p. 4694181. (2008 International Conference on Control, Automation and Systems, ICCAS 2008).研究成果: Conference contribution
2 被引用数 (Scopus) -
Prediction of creep rupture in unidirectional composites
Koyanagi, J., Ogawa, F. & Kawada, H., 2005 12月 1, Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. p. 1857-1863 7 p. (Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics).研究成果: Conference contribution
-
Prediction of CT Images from PET Images Using Deep Learning Approach for Small Animal Systems
Nakanishi, K., Yamamoto, S. & Watabe, T., 2021, 2021 IEEE Nuclear Science Symposium and Medical Imaging Conference Record, NSS/MIC 2021 and 28th International Symposium on Room-Temperature Semiconductor Detectors, RTSD 2022. Tomita, H. & Nakamura, T. (eds.). Institute of Electrical and Electronics Engineers Inc., (2021 IEEE Nuclear Science Symposium and Medical Imaging Conference Record, NSS/MIC 2021 and 28th International Symposium on Room-Temperature Semiconductor Detectors, RTSD 2022).研究成果: Conference contribution
-
Prediction of first transverse crack formation in cross-ply CFRP laminates under fatigue loading
Hosoi, A., Kurihara, K., Sato, N. & Kawada, H., 2012 12月 1, 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today. p. 173-178 6 p. (8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today; vol. 1).研究成果: Conference contribution
2 被引用数 (Scopus) -
Prediction of flame spread along a wooden surface of wall against localized fire
Harada, K., Hirai, N., Hasemi, Y., Fujita, K. & Inoue, M., 2014, WCTE 2014 - World Conference on Timber Engineering, Proceedings. World Conference on Timber Engineering (WCTE)研究成果: Conference contribution
-
Prediction of hot tearing for a partially solidified bismuth bronze by using finite element method analysis
Matsushita, A., Nakazawa, T., Okane, T. & Yoshida, M., 2016, 72nd World Foundry Congress, WFC 2016. The WFO (The World Foundry Organization Ltd), p. 333-334 2 p.研究成果: Conference contribution
-
Prediction of ionospheric fading for long distance emergency communication
Yoshii, K., Saitou, M., Liu, J. & Shimamoto, S., 2019 5月, 2019 IEEE International Conference on Communications Workshops, ICC Workshops 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 8757151. (2019 IEEE International Conference on Communications Workshops, ICC Workshops 2019 - Proceedings).研究成果: Conference contribution
1 被引用数 (Scopus) -
Prediction of Minimum Toe Clearance with a Radial Basis Function Network at the Start of the Swing Phase
Miyake, T., Masakatsu Fujie, G. & Sugano, S., 2018 10月 26, 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2018. Institute of Electrical and Electronics Engineers Inc., p. 1664-1667 4 p. 8512603. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS; vol. 2018-July).研究成果: Conference contribution
1 被引用数 (Scopus) -
Prediction of neck injury risk based on the analysis of localized cervical vertebral motion of human volunteers during low-speed rear impacts
Ono, K., Ejima, S., Suzuki, Y., Kaneoka, K., Fukushima, M. & Ujihashi, S., 2006 12月 1, International Research Council on the Biomechanics of Impact - 2006 International IRCOBI Conference on the Biomechanics of Impact, Proceedings. p. 103-113 11 p. (International Research Council on the Biomechanics of Impact - 2006 International IRCOBI Conference on the Biomechanics of Impact, Proceedings).研究成果: Conference contribution
48 被引用数 (Scopus) -
Prediction of particle size distribution in milling process using discrete element method
Fukui, S., Tsunazawa, Y. & Tokoro, C., 2016, IMPC 2016 - 28th International Mineral Processing Congress. Canadian Institute of Mining, Metallurgy and Petroleum, (IMPC 2016 - 28th International Mineral Processing Congress; vol. 2016-September).研究成果: Conference contribution
-
Prediction of production test performances in Eastern Nankai trough methane hydrate reservoirs using 3D reservoir model
Kurihara, M., Sato, A., Ouchi, H., Narita, H., Ebinuma, T., Suzuki, K., Masuda, Y., Saeki, T., Yamamoto, K. & Fujii, T., 2010, Offshore Technology Conference 2010, OTC 2010. Offshore Technology Conference, p. 1892-1913 22 p. (Proceedings of the Annual Offshore Technology Conference; vol. 3).研究成果: Conference contribution
17 被引用数 (Scopus) -
Prediction of propagation path loss for stratospheric platforms mobile communications in urban site LOS/NLOS environment
Iskandar & Shimamoto, S., 2006, 2006 IEEE International Conference on Communications, ICC 2006. Institute of Electrical and Electronics Engineers Inc., p. 5643-5648 6 p. 4024962. (IEEE International Conference on Communications; vol. 12).研究成果: Conference contribution
17 被引用数 (Scopus) -
Prediction of Representative Waveform of Surplus PV Power Based on Cluster Analysis of Power Demand and PV Output
Kawanobe, A., Wakao, S., Taima, T., Kanno, N. & Mabuchi, H., 2019 6月, 2019 IEEE 46th Photovoltaic Specialists Conference, PVSC 2019. Institute of Electrical and Electronics Engineers Inc., p. 2121-2125 5 p. 8980571. (Conference Record of the IEEE Photovoltaic Specialists Conference).研究成果: Conference contribution
1 被引用数 (Scopus) -
Prediction of residual stress in grey cast iron: Experiment and analysis
Motoyama, Y., Takahashi, H., Okane, T., Fukuda, Y. & Yoshida, M., 2013 12月 1, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. p. 885-892 8 p. (Materials Science and Technology Conference and Exhibition 2013, MS and T 2013; vol. 2).研究成果: Conference contribution
-
Prediction of resist sensitivity for 13.5 nm EUV and 6.x nm EUV extension from sensitivity for EBL
Oyama, T. G., Oshima, A., Nguyen, D. T., Enomoto, S., Washio, M. & Tagawa, S., 2013, Extreme Ultraviolet (EUV) Lithography IV. 86792A. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8679).研究成果: Conference contribution
9 被引用数 (Scopus) -
Prediction of sand problems of a horizontal well from sand production histories of perforated cased wells
Morita, N. & Fuh, G. F., 1998, Proceedings - SPE Annual Technical Conference and Exhibition. Richardson, TX, United States: Soc Pet Eng (SPE), Vol. Delta. p. 113-119 7 p.研究成果: Conference contribution
16 被引用数 (Scopus) -
Prediction of social bookmarking based on a behavior transition model
Furukawa, T., Okamoto, S., Matsuo, Y. & Ishizuka, M., 2010, Proceedings of the ACM Symposium on Applied Computing. p. 1741-1747 7 p.研究成果: Conference contribution
1 被引用数 (Scopus) -
Prediction of the maximum damaged part due to erosion-corrosion in pipes of chemical plants
Ueno, Y., Inoue, K., Tateno, S. & Matsuyama, H., 2006, 2006 SICE-ICASE International Joint Conference. p. 2846-2851 6 p. 4108131. (2006 SICE-ICASE International Joint Conference).研究成果: Conference contribution
1 被引用数 (Scopus) -
Prediction of the physical motion of the human body based on muscle activity during pre-impact braking
Ejima, S., Zama, Y., Satou, F., Holcombe, S., Ono, K., Kaneoka, K. & Shiina, I., 2008 12月 1, International Research Council on the Biomechanics of Injury - 2008 International IRCOBI Conference on the Biomechanics of Injury, Proceedings. p. 163-175 13 p. (International Research Council on the Biomechanics of Injury - 2008 International IRCOBI Conference on the Biomechanics of Injury, Proceedings).研究成果: Conference contribution
36 被引用数 (Scopus) -
Prediction of time to reduce tsunami sediment salinity by rainfall after the Great East Japan Earthquake
Tada, K., Komine, H. & Murakami, S., 2013 1月 1, Coupled Phenomena in Environmental Geotechnics: From Theoretical and Experimental Research to Practical Applications - Proceedings of the International Symposium, ISSMGE TC 215. Taylor and Francis - Balkema, p. 671-674 4 p. (Coupled Phenomena in Environmental Geotechnics: From Theoretical and Experimental Research to Practical Applications - Proceedings of the International Symposium, ISSMGE TC 215).研究成果: Conference contribution