研究成果を検索

検索結果

• Conference contribution

  Precise volume controlled multireagents injective microwell array for efficient cell function analysis

  Shibata, Y., Kawai, K., Kanai, M. & Shoji, S., 2009 1 1, Proceedings of Conference, MicroTAS 2009 - The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences. Chemical and Biological Microsystems Society, p. 1488-1490 3 p. (Proceedings of Conference, MicroTAS 2009 - The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences).

  研究成果: Conference contribution
  4 被引用数 (Scopus)

• Precision-at-ten considered redundant

  Webber, W., Moffat, A., Zobel, J. & Sakai, T., 2008 12 15, ACM SIGIR 2008 - 31st Annual International ACM SIGIR Conference on Research and Development in Information Retrieval, Proceedings. p. 695-696 2 p. (ACM SIGIR 2008 - 31st Annual International ACM SIGIR Conference on Research and Development in Information Retrieval, Proceedings).

  研究成果: Conference contribution
  25 被引用数 (Scopus)

• Precision micro-fabrication by gelatin patterning with electrostatically-injected droplet (ELID) method

  Umezu, S., Kawanishi, M., Ohmori, H., Kitajima, T. & Ito, Y., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. Shore, P., Burke, T., Spaan, H. & Van Brussel, H. (eds.). euspen, p. 404-407 4 p. (Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010; vol. 2).

  研究成果: Conference contribution

• Pre-cooling operation aiming for demand response adaptation in house

  Kim, J., Oki, R., Akimoto, M., Tanabe, S. I., Hayashi, Y. & Morito, N., 2020, 16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020. International Society of Indoor Air Quality and Climate, (16th Conference of the International Society of Indoor Air Quality and Climate: Creative and Smart Solutions for Better Built Environments, Indoor Air 2020).

  研究成果: Conference contribution

• Predicting and learning executability of composite Web services

  Tanaka, M. & Ishida, T., 2008, Service-Oriented Computing - ICSOC 2008 - 6th International Conference, Proceedings. Springer Verlag, p. 572-578 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5364 LNCS).

  研究成果: Conference contribution

  Open Access
  3 被引用数 (Scopus)

• Predicting ASR errors by exploiting barge-in rate of individual users for spoken dialogue systems

  Komatani, K., Kawahara, T. & Okuno, H. G., 2008, Proceedings of the Annual Conference of the International Speech Communication Association, INTERSPEECH. p. 183-186 4 p.

  研究成果: Conference contribution
  6 被引用数 (Scopus)

• Predicting listener back-channels for human-agent interaction using neuro-dynamical model

  Sano, S., Nishide, S., Okuno, H. G. & Ogata, T., 2011, 2011 IEEE/SICE International Symposium on System Integration, SII 2011. p. 18-23 6 p. 6147412. (2011 IEEE/SICE International Symposium on System Integration, SII 2011).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Predicting native language from gaze

  Berzak, Y., Nakamura, C., Flynn, S. & Katz, B., 2017, ACL 2017 - 55th Annual Meeting of the Association for Computational Linguistics, Proceedings of the Conference (Long Papers). Association for Computational Linguistics (ACL), p. 541-551 11 p. (ACL 2017 - 55th Annual Meeting of the Association for Computational Linguistics, Proceedings of the Conference (Long Papers); vol. 1).

  研究成果: Conference contribution

  Open Access
  3 被引用数 (Scopus)

• Predicting network outages based on Q-drop in optical network

  Hasegawa, Y. & Uchida, M., 2019 7, Proceedings - 2019 IEEE 43rd Annual Computer Software and Applications Conference, COMPSAC 2019. Getov, V., Gaudiot, J-L., Yamai, N., Cimato, S., Chang, M., Teranishi, Y., Yang, J-J., Leong, H. V., Shahriar, H., Takemoto, M., Towey, D., Takakura, H., Elci, A., Takeuchi, S. & Puri, S. (eds.). IEEE Computer Society, p. 258-263 6 p. 8754055. (Proceedings - International Computer Software and Applications Conference; vol. 1).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Predicting object dynamics from visual images through active sensing experiences

  Nishide, S., Ogata, T., Tani, J., Komatani, K. & Okuno, H. G., 2007 11 27, 2007 IEEE International Conference on Robotics and Automation, ICRA'07. p. 2501-2506 6 p. 4209459. (Proceedings - IEEE International Conference on Robotics and Automation).

  研究成果: Conference contribution
  7 被引用数 (Scopus)

• Predicting release time based on Generalized Software Reliability Model (GSRM)

  Honda, K., Washizaki, H. & Fukazawa, Y., 2014 9 15, Proceedings - International Computer Software and Applications Conference. IEEE Computer Society, p. 604-605 2 p. 6899270

  研究成果: Conference contribution
  7 被引用数 (Scopus)

• Predicting Release Time for Open Source Software Based on the Generalized Software Reliability Model

  Washizaki, H., Honda, K. & Fukazawa, Y., 2015 9 29, Proceedings - 2015 Agile Conference, Agile 2015. Institute of Electrical and Electronics Engineers Inc., p. 76-81 6 p. 7284601

  研究成果: Conference contribution
  10 被引用数 (Scopus)

• Predicting the evocation relation between lexicalized concepts

  Hayashi, Y., 2016, COLING 2016 - 26th International Conference on Computational Linguistics, Proceedings of COLING 2016: Technical Papers. Association for Computational Linguistics, ACL Anthology, p. 1657-1668 12 p. (COLING 2016 - 26th International Conference on Computational Linguistics, Proceedings of COLING 2016: Technical Papers).

  研究成果: Conference contribution
  3 被引用数 (Scopus)

• Predicting time range of development based on generalized software reliability model

  Honda, K., Nakai, H., Washizaki, H., Fukazawa, Y., Asoh, K., Takahashi, K., Ogawa, K., Mori, M., Hino, T., Hayakawa, Y., Tanaka, Y., Yamada, S. & Miyazaki, D., 2014, Proceedings - 21st Asia-Pacific Software Engineering Conference, APSEC 2014. Gueheneuc, Y-G., Kwon, G. & Cha, S. (eds.). IEEE Computer Society, p. 351-358 8 p. 7091330. (Proceedings - Asia-Pacific Software Engineering Conference, APSEC; vol. 1).

  研究成果: Conference contribution
  11 被引用数 (Scopus)

• Predicting various types of user attributes in Twitter by using personalized pagerank

  Uesato, K., Asai, H. & Yamana, H., 2015 12 22, Proceedings - 2015 IEEE International Conference on Big Data, IEEE Big Data 2015. Luo, F., Ogan, K., Zaki, M. J., Haas, L., Ooi, B. C., Kumar, V., Rachuri, S., Pyne, S., Ho, H., Hu, X., Yu, S., Hsiao, M. H-I. & Li, J. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 2825-2827 3 p. 7364090. (Proceedings - 2015 IEEE International Conference on Big Data, IEEE Big Data 2015).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Prediction, measurement and stabilization of structural deformation on orbit

  Ishimura, K., Senba, A., Iwasa, T., Ogi, Y., Akita, T., Furuya, H. & Minesugi, K., 2010, 61st International Astronautical Congress 2010, IAC 2010. p. 6116-6121 6 p. (61st International Astronautical Congress 2010, IAC 2010; vol. 8).

  研究成果: Conference contribution
  3 被引用数 (Scopus)

• Prediction and imitation of other's motions by reusing own forward-inverse model in robots

  Ogata, T., Yokoya, R., Tani, J., Komatani, K. & Okuno, H. G., 2009 11 2, 2009 IEEE International Conference on Robotics and Automation, ICRA '09. p. 4144-4149 6 p. 5152363. (Proceedings - IEEE International Conference on Robotics and Automation).

  研究成果: Conference contribution
  8 被引用数 (Scopus)

• Prediction interval estimation of 10 second fluctuation of PV output with just-in-time modeling

  Kumekawa, N., Honma, H. & Wakao, S., 2017, 2017 IEEE 44th Photovoltaic Specialist Conference, PVSC 2017. Institute of Electrical and Electronics Engineers Inc., p. 3494-3499 6 p. (2017 IEEE 44th Photovoltaic Specialist Conference, PVSC 2017).

  研究成果: Conference contribution

• Prediction interval estimation of 10 second fluctuation of PV output with just-in-time modeling

  Kumekawa, N., Honma, H. & Wakao, S., 2016 11 18, 2016 IEEE 43rd Photovoltaic Specialists Conference, PVSC 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-November. p. 1825-1830 6 p. 7749937

  研究成果: Conference contribution
  3 被引用数 (Scopus)

• Prediction method of voids distribution in the punched surface of the spheroidizing annealed medium carbon steel sheet by the scrap

  Saito, K., Inoue, C., Yamazaki, K., Goto, S. & Suzuki, S., 2019, MS and T 2019 - Materials Science and Technology 2019. Materials Science and Technology, p. 929-937 9 p. (MS and T 2019 - Materials Science and Technology 2019).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Prediction model to design standard production period for steel plate mills

  Shioya, M. & Uchida, K., 2017 6 7, 2017 3rd International Conference on Control, Automation and Robotics, ICCAR 2017. Institute of Electrical and Electronics Engineers Inc., p. 346-351 6 p. 7942716

  研究成果: Conference contribution

• Prediction of blast furnace operation using on-line Bayesian learning

  Kaneko, N., Sakamoto, S., Uchida, K., Ogai, H., Ito, M. & Matsuzaki, S., 2008 12 1, 2008 International Conference on Control, Automation and Systems, ICCAS 2008. p. 2240-2245 6 p. 4694181. (2008 International Conference on Control, Automation and Systems, ICCAS 2008).

  研究成果: Conference contribution
  2 被引用数 (Scopus)

• Prediction of creep rupture in unidirectional composites

  Koyanagi, J., Ogawa, F. & Kawada, H., 2005 12 1, Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. p. 1857-1863 7 p. (Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics).

  研究成果: Conference contribution

• Prediction of first transverse crack formation in cross-ply CFRP laminates under fatigue loading

  Hosoi, A., Kurihara, K., Sato, N. & Kawada, H., 2012 12 1, 8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today. p. 173-178 6 p. (8th Asian-Australasian Conference on Composite Materials 2012, ACCM 2012 - Composites: Enabling Tomorrow's Industry Today; vol. 1).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Prediction of flame spread along a wooden surface of wall against localized fire

  Harada, K., Hirai, N., Hasemi, Y., Fujita, K. & Inoue, M., 2014, WCTE 2014 - World Conference on Timber Engineering, Proceedings. World Conference on Timber Engineering (WCTE)

  研究成果: Conference contribution

• Prediction of hot tearing for a partially solidified bismuth bronze by using finite element method analysis

  Matsushita, A., Nakazawa, T., Okane, T. & Yoshida, M., 2016, 72nd World Foundry Congress, WFC 2016. The WFO (The World Foundry Organization Ltd), p. 333-334 2 p.

  研究成果: Conference contribution

• Prediction of ionospheric fading for long distance emergency communication

  Yoshii, K., Saitou, M., Liu, J. & Shimamoto, S., 2019 5, 2019 IEEE International Conference on Communications Workshops, ICC Workshops 2019 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 8757151. (2019 IEEE International Conference on Communications Workshops, ICC Workshops 2019 - Proceedings).

  研究成果: Conference contribution

• Prediction of Minimum Toe Clearance with a Radial Basis Function Network at the Start of the Swing Phase

  Miyake, T., Masakatsu Fujie, G. & Sugano, S., 2018 10 26, 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2018. Institute of Electrical and Electronics Engineers Inc., p. 1664-1667 4 p. 8512603. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS; vol. 2018-July).

  研究成果: Conference contribution

• Prediction of neck injury risk based on the analysis of localized cervical vertebral motion of human volunteers during low-speed rear impacts

  Ono, K., Ejima, S., Suzuki, Y., Kaneoka, K., Fukushima, M. & Ujihashi, S., 2006 12 1, International Research Council on the Biomechanics of Impact - 2006 International IRCOBI Conference on the Biomechanics of Impact, Proceedings. p. 103-113 11 p. (International Research Council on the Biomechanics of Impact - 2006 International IRCOBI Conference on the Biomechanics of Impact, Proceedings).

  研究成果: Conference contribution
  41 被引用数 (Scopus)

• Prediction of particle size distribution in milling process using discrete element method

  Fukui, S., Tsunazawa, Y. & Tokoro, C., 2016 1 1, IMPC 2016 - 28th International Mineral Processing Congress. Canadian Institute of Mining, Metallurgy and Petroleum, Vol. 2016-September.

  研究成果: Conference contribution

• Prediction of production test performances in Eastern Nankai trough methane hydrate reservoirs using 3D reservoir model

  Kurihara, M., Sato, A., Ouchi, H., Narita, H., Ebinuma, T., Suzuki, K., Masuda, Y., Saeki, T., Yamamoto, K. & Fujii, T., 2010, Offshore Technology Conference 2010, OTC 2010. Offshore Technology Conference, p. 1892-1913 22 p. (Proceedings of the Annual Offshore Technology Conference; vol. 3).

  研究成果: Conference contribution
  14 被引用数 (Scopus)

• Prediction of propagation path loss for stratospheric platforms mobile communications in urban site LOS/NLOS environment

  Iskandar & Shimamoto, S., 2006, 2006 IEEE International Conference on Communications, ICC 2006. p. 5643-5648 6 p. 4024962. (IEEE International Conference on Communications; vol. 12).

  研究成果: Conference contribution
  17 被引用数 (Scopus)

• Prediction of Representative Waveform of Surplus PV Power Based on Cluster Analysis of Power Demand and PV Output

  Kawanobe, A., Wakao, S., Taima, T., Kanno, N. & Mabuchi, H., 2019 6, 2019 IEEE 46th Photovoltaic Specialists Conference, PVSC 2019. Institute of Electrical and Electronics Engineers Inc., p. 2121-2125 5 p. 8980571. (Conference Record of the IEEE Photovoltaic Specialists Conference).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Prediction of residual stress in grey cast iron: Experiment and analysis

  Motoyama, Y., Takahashi, H., Okane, T., Fukuda, Y. & Yoshida, M., 2013 12 1, Materials Science and Technology Conference and Exhibition 2013, MS and T 2013. p. 885-892 8 p. (Materials Science and Technology Conference and Exhibition 2013, MS and T 2013; vol. 2).

  研究成果: Conference contribution

• Prediction of resist sensitivity for 13.5 nm EUV and 6.x nm EUV extension from sensitivity for EBL

  Oyama, T. G., Oshima, A., Nguyen, D. T., Enomoto, S., Washio, M. & Tagawa, S., 2013 6 5, Extreme Ultraviolet (EUV) Lithography IV. 86792A. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8679).

  研究成果: Conference contribution
  9 被引用数 (Scopus)

• Prediction of sand problems of a horizontal well from sand production histories of perforated cased wells

  Morita, N. & Fuh, G. F., 1998, Proceedings - SPE Annual Technical Conference and Exhibition. Richardson, TX, United States: Soc Pet Eng (SPE), Vol. Delta. p. 113-119 7 p.

  研究成果: Conference contribution
  14 被引用数 (Scopus)

• Prediction of social bookmarking based on a behavior transition model

  Furukawa, T., Okamoto, S., Matsuo, Y. & Ishizuka, M., 2010, Proceedings of the ACM Symposium on Applied Computing. p. 1741-1747 7 p.

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Prediction of the maximum damaged part due to erosion-corrosion in pipes of chemical plants

  Ueno, Y., Inoue, K., Tateno, S. & Matsuyama, H., 2006 12 1, 2006 SICE-ICASE International Joint Conference. p. 2846-2851 6 p. 4108131. (2006 SICE-ICASE International Joint Conference).

  研究成果: Conference contribution

• Prediction of the physical motion of the human body based on muscle activity during pre-impact braking

  Ejima, S., Zama, Y., Satou, F., Holcombe, S., Ono, K., Kaneoka, K. & Shiina, I., 2008 12 1, International Research Council on the Biomechanics of Injury - 2008 International IRCOBI Conference on the Biomechanics of Injury, Proceedings. p. 163-175 13 p. (International Research Council on the Biomechanics of Injury - 2008 International IRCOBI Conference on the Biomechanics of Injury, Proceedings).

  研究成果: Conference contribution
  30 被引用数 (Scopus)

• Prediction of time to reduce tsunami sediment salinity by rainfall after the Great East Japan Earthquake

  Tada, K., Komine, H. & Murakami, S., 2013 1 1, Coupled Phenomena in Environmental Geotechnics: From Theoretical and Experimental Research to Practical Applications - Proceedings of the International Symposium, ISSMGE TC 215. Taylor and Francis - Balkema, p. 671-674 4 p. (Coupled Phenomena in Environmental Geotechnics: From Theoretical and Experimental Research to Practical Applications - Proceedings of the International Symposium, ISSMGE TC 215).

  研究成果: Conference contribution

• Prediction of ultra-lean SI engine performance by QD-combustion model with an improved laminar flame speed

  Sok, R., Kusaka, J. & Yamaguchi, K., 2020, ASME 2020 Power Conference, POWER 2020, collocated with the 2020 International Conference on Nuclear Engineering. American Society of Mechanical Engineers (ASME), v001t03a002. (American Society of Mechanical Engineers, Power Division (Publication) POWER; vol. 2020-August).

  研究成果: Conference contribution

• Predictive learning with uncertainty estimation for modeling infants' cognitive development with caregivers: A neurorobotics experiment

  Murata, S., Tomioka, S., Nakajo, R., Yamada, T., Arie, H., Ogata, T. & Sugano, S., 2015 12 2, 5th Joint International Conference on Development and Learning and Epigenetic Robotics, ICDL-EpiRob 2015. Institute of Electrical and Electronics Engineers Inc., p. 302-307 6 p. 7346162. (5th Joint International Conference on Development and Learning and Epigenetic Robotics, ICDL-EpiRob 2015).

  研究成果: Conference contribution
  1 被引用数 (Scopus)

• Predictive model for ionic liquid extraction solvents for rare earth elements

  Grabda, M. G., Oleszek, S., Panigrahi, M., Kozak, D., Eckert, F., Shibata, E. & Nakamura, T., 2015 12 31, International Conference of Computational Methods in Sciences and Engineering 2015, ICCMSE 2015. American Institute of Physics Inc., Vol. 1702. 190004

  研究成果: Conference contribution

• Predictive model for scour depth of coastal structure failures due to tsunamis

  Jayaratne, R., Abimbola, A., Mikami, T., Matsuba, S., Esteban, M. & Shibayama, T., 2014 1 1, Proceedings of the 34th International Conference on Coastal Engineering, ICCE 2014. Lynett, P. (ed.). American Society of Civil Engineers (ASCE), (Proceedings of the Coastal Engineering Conference; vol. 2014-January).

  研究成果: Conference contribution
  8 被引用数 (Scopus)

• Predictive model of thermal sensation for heating systems considering contact with the floor

  Kubo, H., Tanabe, S. I., Yokoyama, T., Omori, T., Ohira, N., Tominaga, R. & Akimoto, T., 2012 12 1, 10th International Conference on Healthy Buildings 2012. p. 1052-1057 6 p. (10th International Conference on Healthy Buildings 2012; vol. 2).

  研究成果: Conference contribution

• Predictive visual feedback control with eye-in/to-hand configuration via stabilizing receding horizo

  Murao, T., Kawai, H. & Fujita, M., 2008, IFAC Proceedings Volumes (IFAC-PapersOnline). 1 PART 1 ed. Vol. 17.

  研究成果: Conference contribution
  2 被引用数 (Scopus)

• Predictive visual feedback control with eye-in-hand system via stabilizing receding horizon approach

  Murao, T., Yamada, T. & Fujita, M., 2006, Proceedings of the IEEE Conference on Decision and Control. p. 1758-1763 6 p. 4177582

  研究成果: Conference contribution
  15 被引用数 (Scopus)

• Pre-distortion technique for compensating QAM signal distortions generated by dual-parallel Mach-Zehnder modulators with low-extinction ratio and small-chirp parameter

  Kodama, Y., Yamaguchi, Y., Kanno, A., Kawanishi, T. & Nakajima, H., 2018 1 2, 22nd Microoptics Conference, MOC 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January. p. 50-51 2 p.

  研究成果: Conference contribution

• Preface

  Ishida, T., Khalid, M. B., Lam, K. Y., Lee, J., Nakashima, H., Sadananda, R., Shi, Z., Yuan, S. T. & Zhang, C., 1999, Multiagent Platforms - 1st Pacific Rim International Workshop on Multi-Agents, PRIMA 1998, Selected Papers. Ishida, T. (ed.). Springer Verlag, p. 5 1 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 1599).

  研究成果: Conference contribution

• Preference based recommendation method by SOM aided AHP and a case study of smartphone

  Zeng, X., Cai, L. & Murata, T., 2012 11 1, 2012 IEEE International Conference on Automation and Logistics, ICAL 2012. p. 478-483 6 p. 6308253. (IEEE International Conference on Automation and Logistics, ICAL).

  研究成果: Conference contribution
  2 被引用数 (Scopus)