A capacitance measurement device for running hardware devices and its evaluations

Makoto Nishizawa, Kento Hasegawa, Nozomu Togawa

研究成果: Article査読

抄録

In IoT (Internet-of-Things) era, the number and variety of hardware devices becomes continuously increasing. Several IoT devices are utilized at infrastructure equipments. How to maintain such IoT devices is a serious concern. Capacitance measurement is one of the powerful ways to detect anomalous states in the structure of the hardware devices. Particularly, measuring capacitance while the hardware device is running is a major challenge but no such researches proposed so far. This paper proposes a capacitance measuring device which measures device capacitance in operation. We firstly combine the AC (alternating current) voltage signal with the DC (direct current) supply voltage signal and generates the fluctuating signal. We supply the fluctuating signal to the target device instead of supplying the DC supply voltage. By effectively filtering the observed current in the target device, the filtered current can be proportional to the capacitance value and thus we can measure the target device capacitance even when it is running. We have implemented the proposed capacitance measuring device on the printed wiring board with the size of 95 mm × 70 mm and evaluated power consumption and accuracy of the capacitance measurement. The experimental results demonstrate that power consumption of the proposed capacitance measuring device is reduced by 65% in low-power mode from measuring mode and proposed device successfully measured capacitance in 0.002 µF resolution.

本文言語English
ページ(範囲)1018-1027
ページ数10
ジャーナルIEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences
E103A
9
DOI
出版ステータスPublished - 2020 9 1

ASJC Scopus subject areas

  • 信号処理
  • コンピュータ グラフィックスおよびコンピュータ支援設計
  • 電子工学および電気工学
  • 応用数学

フィンガープリント

「A capacitance measurement device for running hardware devices and its evaluations」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル