A Method to Design A Power Flow and Energy Management Controller for Battery and EDLC Hybrid Electric Vehicle

Ryo Kimura, Keiichiro Kondo, Kohei Aiso, Hiroyasu Kobayashi, Shunya Sakamoto, Atsushi Okada, Kensuke Sasaki, Takashi Kato

研究成果: Conference contribution

抄録

In this paper, a method to design the power flow and energy management controller is proposed, for a hybrid energy storage system with battery and EDLC on an assumed electric vehicle. Numerical simulation under an assumed speed profile is carried out to reveal the power and the energy profile of the ESDs under the wide frequency range of the load power. The overall loss in the ESDs and the DC/DC converter are evaluated, according to the power and the energy profile of the ESDs. The time constant of the filter T{EDLC} for the controller is proposed to be set shorter as far to smooth the battery power not to absorb the regenerative power. EDLC is mounted less as far not to increase to the energy loss in the EDLC, under the condition of the designed controller.

本文言語English
ホスト出版物のタイトルProceedings of 2021 IEEE 30th International Symposium on Industrial Electronics, ISIE 2021
出版社Institute of Electrical and Electronics Engineers Inc.
ISBN(電子版)9781728190235
DOI
出版ステータスPublished - 2021 6 20
イベント30th IEEE International Symposium on Industrial Electronics, ISIE 2021 - Kyoto, Japan
継続期間: 2021 6 202021 6 23

出版物シリーズ

名前IEEE International Symposium on Industrial Electronics
2021-June

Conference

Conference30th IEEE International Symposium on Industrial Electronics, ISIE 2021
国/地域Japan
CityKyoto
Period21/6/2021/6/23

ASJC Scopus subject areas

  • 電子工学および電気工学
  • 制御およびシステム工学

フィンガープリント

「A Method to Design A Power Flow and Energy Management Controller for Battery and EDLC Hybrid Electric Vehicle」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル