A new methodology for suppressing pressure pulsation in a draft tube by grooved runner cone

Takeshi Sano, Masayuki Ookawa, Hiromi Watanabe, Nobuaki Okamoto, Hiroshi Yano, Nobuhide Fukuda, Masatake Maekawa, Kazuyoshi Miyagawa

研究成果: Conference contribution

4 被引用数 (Scopus)

抄録

High amplitude of pressure fluctuation is observed in a draft tube, for the case of partial load operation. Several methods had been reported to decrease the amplitude so far, such as, air or water injection to the draft tube, fins on the draft tube surface, or runner replacement with optimized velocity profile at runner exit. However, several problems for each method can be considered, such as, negative influence on efficiency, high cost, technical difficulties for installation, and so on. To solve these problems and satisfy the demand for decreasing the amplitude of pressure fluctuation simultaneously, a new runner cone with grooves on the surface was developed. As for the case with reversible pump turbine, grooved runner cone was developed with unsteady draft tube calculation based on Design of Experiment (DOE) method, and confirmed by model tests. Finally, developed runner cone was installed to the prototype pump turbine, and predicted performance was confirmed by on-site tests. Using this result, development of a new runner cone for hydraulic turbine had been started. For this case, meridian shape of the runner cone was also selected as a design parameter. Finally, we obtained the optimized shape, "diverged runner cone with spiral groove", and the performance is confirmed by the model test. In this paper, details of development, especially for the case of hydraulic turbine and considerations of the mechanism are treated.

本文言語English
ホスト出版物のタイトルASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011
ページ1943-1950
ページ数8
PARTS A, B, C, D
DOI
出版ステータスPublished - 2011 12月 1
外部発表はい
イベントASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011 - Hamamatsu, Japan
継続期間: 2011 7月 242011 7月 29

出版物シリーズ

名前ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011
番号PARTS A, B, C, D
1

Conference

ConferenceASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011
国/地域Japan
CityHamamatsu
Period11/7/2411/7/29

ASJC Scopus subject areas

  • 流体および伝熱

フィンガープリント

「A new methodology for suppressing pressure pulsation in a draft tube by grooved runner cone」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル