A New Weighting Method for CCD Analog Sampled Filter

Takaaki Baba, Temo Kitani, Reiichi Sasak I, Yoshihiro Hosokawa, Masakazu Akiyama, Tadahiro Nakajima

研究成果: Article

3 引用 (Scopus)

抄録

A new weighting method for CCD transversal filtering is proposed. This type of filtering or “input gate weighting method” is a novel design aspect of weighting and sampling by the input diodes and dual input gates. This method implies signal processing over the high frequency range and simple design of an on-a-chip CCD filter. Lowpass filters are fabricated on both of surface and buried channel structures. Experimental results indicate good agreement with theoretical calculations for both the surface and buried channel samples operated at a sample rate of up to 10 MHz.

元の言語English
ページ(範囲)387-390
ページ数4
ジャーナルJapanese Journal of Applied Physics
16
DOI
出版物ステータスPublished - 1977
外部発表Yes

Fingerprint

Charge coupled devices
charge coupled devices
analogs
filters
Signal processing
Diodes
Sampling
signal processing
frequency ranges
sampling
diodes
chips

ASJC Scopus subject areas

  • Engineering(all)
  • Physics and Astronomy(all)

これを引用

Baba, T., Kitani, T., Sasak I, R., Hosokawa, Y., Akiyama, M., & Nakajima, T. (1977). A New Weighting Method for CCD Analog Sampled Filter. Japanese Journal of Applied Physics, 16, 387-390. https://doi.org/10.7567/JJAPS.16S1.387

A New Weighting Method for CCD Analog Sampled Filter. / Baba, Takaaki; Kitani, Temo; Sasak I, Reiichi; Hosokawa, Yoshihiro; Akiyama, Masakazu; Nakajima, Tadahiro.

:: Japanese Journal of Applied Physics, 巻 16, 1977, p. 387-390.

研究成果: Article

Baba, T, Kitani, T, Sasak I, R, Hosokawa, Y, Akiyama, M & Nakajima, T 1977, 'A New Weighting Method for CCD Analog Sampled Filter', Japanese Journal of Applied Physics, 巻. 16, pp. 387-390. https://doi.org/10.7567/JJAPS.16S1.387
Baba T, Kitani T, Sasak I R, Hosokawa Y, Akiyama M, Nakajima T. A New Weighting Method for CCD Analog Sampled Filter. Japanese Journal of Applied Physics. 1977;16:387-390. https://doi.org/10.7567/JJAPS.16S1.387
Baba, Takaaki ; Kitani, Temo ; Sasak I, Reiichi ; Hosokawa, Yoshihiro ; Akiyama, Masakazu ; Nakajima, Tadahiro. / A New Weighting Method for CCD Analog Sampled Filter. :: Japanese Journal of Applied Physics. 1977 ; 巻 16. pp. 387-390.
@article{127d71da473f4b83a279bccf6c4dd47d,
title = "A New Weighting Method for CCD Analog Sampled Filter",
abstract = "A new weighting method for CCD transversal filtering is proposed. This type of filtering or “input gate weighting method” is a novel design aspect of weighting and sampling by the input diodes and dual input gates. This method implies signal processing over the high frequency range and simple design of an on-a-chip CCD filter. Lowpass filters are fabricated on both of surface and buried channel structures. Experimental results indicate good agreement with theoretical calculations for both the surface and buried channel samples operated at a sample rate of up to 10 MHz.",
author = "Takaaki Baba and Temo Kitani and {Sasak I}, Reiichi and Yoshihiro Hosokawa and Masakazu Akiyama and Tadahiro Nakajima",
year = "1977",
doi = "10.7567/JJAPS.16S1.387",
language = "English",
volume = "16",
pages = "387--390",
journal = "Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes",
issn = "0021-4922",
publisher = "Japan Society of Applied Physics",

}

TY - JOUR

T1 - A New Weighting Method for CCD Analog Sampled Filter

AU - Baba, Takaaki

AU - Kitani, Temo

AU - Sasak I, Reiichi

AU - Hosokawa, Yoshihiro

AU - Akiyama, Masakazu

AU - Nakajima, Tadahiro

PY - 1977

Y1 - 1977

N2 - A new weighting method for CCD transversal filtering is proposed. This type of filtering or “input gate weighting method” is a novel design aspect of weighting and sampling by the input diodes and dual input gates. This method implies signal processing over the high frequency range and simple design of an on-a-chip CCD filter. Lowpass filters are fabricated on both of surface and buried channel structures. Experimental results indicate good agreement with theoretical calculations for both the surface and buried channel samples operated at a sample rate of up to 10 MHz.

AB - A new weighting method for CCD transversal filtering is proposed. This type of filtering or “input gate weighting method” is a novel design aspect of weighting and sampling by the input diodes and dual input gates. This method implies signal processing over the high frequency range and simple design of an on-a-chip CCD filter. Lowpass filters are fabricated on both of surface and buried channel structures. Experimental results indicate good agreement with theoretical calculations for both the surface and buried channel samples operated at a sample rate of up to 10 MHz.

UR - http://www.scopus.com/inward/record.url?scp=84941603109&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84941603109&partnerID=8YFLogxK

U2 - 10.7567/JJAPS.16S1.387

DO - 10.7567/JJAPS.16S1.387

M3 - Article

AN - SCOPUS:84941603109

VL - 16

SP - 387

EP - 390

JO - Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes

JF - Japanese Journal of Applied Physics, Part 1: Regular Papers & Short Notes

SN - 0021-4922

ER -