A Simple Active Power Control for High Power Wireless Power Transmission System Considering Coil Misalignment and Its Design Method

Febry Pandu Wijaya, Takuya Shimotsu, Tatsuhito Saito, Keiichiro Kondo

研究成果: Article

3 引用 (Scopus)

抄録

A Series-Series compensated capacitors topology of the wireless power transmission (WPT) system has characteristics of increasing active power at coil misalignment when controlled using the conventional secondary DC-link voltage control. This results in larger total capacity of the primary and secondary sides' converters. To cope with these problems, this paper proposes a simple constant secondary active power control method, where the secondary DC-link voltage is regulated according to the onboard active power rating and secondary current. The effectiveness of the control method is verified by 100 W experimental systems. The numerical simulation that considers the harmonic components is developed to be compared and justified by the experimental results, which is then used to design the capacity of 300 kW WPT system assuming actual railway vehicle application. By the proposed method, the design criteria of the rating voltage and current of the primary and secondary side components can be determined.

元の言語English
ジャーナルIEEE Transactions on Power Electronics
DOI
出版物ステータスAccepted/In press - 2018 2 24
外部発表Yes

Fingerprint

Power transmission
Power control
Electric potential
Voltage control
Capacitors
Topology
Computer simulation

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

これを引用

@article{49ab7b9e94a1497990a041f8e98854f6,
title = "A Simple Active Power Control for High Power Wireless Power Transmission System Considering Coil Misalignment and Its Design Method",
abstract = "A Series-Series compensated capacitors topology of the wireless power transmission (WPT) system has characteristics of increasing active power at coil misalignment when controlled using the conventional secondary DC-link voltage control. This results in larger total capacity of the primary and secondary sides' converters. To cope with these problems, this paper proposes a simple constant secondary active power control method, where the secondary DC-link voltage is regulated according to the onboard active power rating and secondary current. The effectiveness of the control method is verified by 100 W experimental systems. The numerical simulation that considers the harmonic components is developed to be compared and justified by the experimental results, which is then used to design the capacity of 300 kW WPT system assuming actual railway vehicle application. By the proposed method, the design criteria of the rating voltage and current of the primary and secondary side components can be determined.",
author = "Wijaya, {Febry Pandu} and Takuya Shimotsu and Tatsuhito Saito and Keiichiro Kondo",
year = "2018",
month = "2",
day = "24",
doi = "10.1109/TPEL.2018.2799679",
language = "English",
journal = "IEEE Transactions on Power Electronics",
issn = "0885-8993",
publisher = "Institute of Electrical and Electronics Engineers Inc.",

}

TY - JOUR

T1 - A Simple Active Power Control for High Power Wireless Power Transmission System Considering Coil Misalignment and Its Design Method

AU - Wijaya, Febry Pandu

AU - Shimotsu, Takuya

AU - Saito, Tatsuhito

AU - Kondo, Keiichiro

PY - 2018/2/24

Y1 - 2018/2/24

N2 - A Series-Series compensated capacitors topology of the wireless power transmission (WPT) system has characteristics of increasing active power at coil misalignment when controlled using the conventional secondary DC-link voltage control. This results in larger total capacity of the primary and secondary sides' converters. To cope with these problems, this paper proposes a simple constant secondary active power control method, where the secondary DC-link voltage is regulated according to the onboard active power rating and secondary current. The effectiveness of the control method is verified by 100 W experimental systems. The numerical simulation that considers the harmonic components is developed to be compared and justified by the experimental results, which is then used to design the capacity of 300 kW WPT system assuming actual railway vehicle application. By the proposed method, the design criteria of the rating voltage and current of the primary and secondary side components can be determined.

AB - A Series-Series compensated capacitors topology of the wireless power transmission (WPT) system has characteristics of increasing active power at coil misalignment when controlled using the conventional secondary DC-link voltage control. This results in larger total capacity of the primary and secondary sides' converters. To cope with these problems, this paper proposes a simple constant secondary active power control method, where the secondary DC-link voltage is regulated according to the onboard active power rating and secondary current. The effectiveness of the control method is verified by 100 W experimental systems. The numerical simulation that considers the harmonic components is developed to be compared and justified by the experimental results, which is then used to design the capacity of 300 kW WPT system assuming actual railway vehicle application. By the proposed method, the design criteria of the rating voltage and current of the primary and secondary side components can be determined.

UR - http://www.scopus.com/inward/record.url?scp=85042709205&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85042709205&partnerID=8YFLogxK

U2 - 10.1109/TPEL.2018.2799679

DO - 10.1109/TPEL.2018.2799679

M3 - Article

AN - SCOPUS:85042709205

JO - IEEE Transactions on Power Electronics

JF - IEEE Transactions on Power Electronics

SN - 0885-8993

ER -