A study on countermeasures against wind-induced cable vibrations in cable-stayed bridge by changing vibration modes: 3rd report, design method of a control device

Ryuji Nakano, Shigehiko Kaneko, Ryuta Katamura

研究成果: Article査読

抄録

In order to suppress vibrations of stay cables in cable-stayed bridges, the authors developed a new vibration reduction method called "Changing vibration modes method" using a permanent magnet. The authors have confirmed its effectiveness in former reports by both theoretical analyses and wind tunnel tests. In second report, the authors analyzed cable vibrations by taking account of only an unstable mode and clarified how the design parameters such as a gap and magnetic force affect the control efficiency. In this report, accuracy of the analysis is further improved by introducing the higher modes effects as an "equivalent aerodynamic damping". Then, a design procedure of the parameters is proposed on the basis of the improved analysis, and its validity is shown by wind tunnel test results.

本文言語English
ページ(範囲)2225-2232
ページ数8
ジャーナルNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
68
8
DOI
出版ステータスPublished - 2002 8
外部発表はい

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

フィンガープリント 「A study on countermeasures against wind-induced cable vibrations in cable-stayed bridge by changing vibration modes: 3rd report, design method of a control device」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル