A study on the optimization method for panel layout problem in drywall

Kosei Ishida*, Naruo Kano

*この研究の対応する著者

研究成果: Paper査読

1 被引用数 (Scopus)

抄録

This study is aimed at developing methods to optimize the material yield of drywall panels. In this paper, the authors describe the drywall panel layout optimization method which consists of the following three steps: first, to generate possible alternative patterns of drywall panel layout in a wall; second, for each alternative pattern, to find out the best combination of panel parts to be cut from a panel of standard size; third, to solve the cutting length of panels, the waste volume of panels and the length of panel joints in each layout pattern. The authors applied this method to minimize the cost of drywall using plaster board (1820×910mm). The method generates possible patterns of drywall panel layout in the wall and acquires the best combination of panels to be cut from a standardsize panel, then estimates the cost of drywall works in each pattern.

本文言語English
ページ373-374
ページ数2
DOI
出版ステータスPublished - 2011
イベント28th International Symposium on Automation and Robotics in Construction, ISARC 2011 - Seoul, Korea, Republic of
継続期間: 2011 6 292011 7 2

Conference

Conference28th International Symposium on Automation and Robotics in Construction, ISARC 2011
国/地域Korea, Republic of
CitySeoul
Period11/6/2911/7/2

ASJC Scopus subject areas

  • 人工知能
  • コンピュータ ビジョンおよびパターン認識
  • 建築および建設

フィンガープリント

「A study on the optimization method for panel layout problem in drywall」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル