Achievement of high coercivity in Sm(Fe0.8Co0.2)12 anisotropic magnetic thin film by boron doping

H. Sepehri-Amin*, Y. Tamazawa, M. Kambayashi, G. Saito, Y. K. Takahashi, D. Ogawa, T. Ohkubo, S. Hirosawa, M. Doi, T. Shima, K. Hono

*この研究の対応する著者

研究成果: Article査読

21 被引用数 (Scopus)

抄録

SmFe12-based compounds have been considered as promising candidates for next generation permanent magnet materials because of their excellent intrinsic hard magnetic properties with a minimum usage of rare earth elements. However, realizing high coercivity in anisotropic microstructure is a big challenge, which hinders their practical applications. In this work, a novel anisotropic granular microstructure of Sm(Fe0.8Co0.2)12 with a sufficiently large coercivity (µ0Hc) of 1.2 T and with a high remanent magnetization of 1.50 T is demonstrated in thin films prepared by co-sputtering Sm(Fe,Co)12 with boron. Detailed microstructure characterization using high resolution scanning transmission electron microscopy (STEM) and atom probe tomography (APT) indicate that the addition of B leads to the development of columnar-shaped Sm(Fe0.8Co0.2)12 grains with a size of ∼40 nm, which are surrounded by ∼3 nm-thick B-enriched amorphous intergranular phase. Domain wall pinning at the amorphous grain boundary phase is attributed to the high coercivity. This work provides a guiding principle for realizing high-coercivity anisotropic SmFe12-based permanent magnets, which can outperform Nd-Fe-B magnets and could be used as the next-generation high-performance permanent magnets in various applications.

本文言語English
ページ(範囲)337-342
ページ数6
ジャーナルActa Materialia
194
DOI
出版ステータスPublished - 2020 8 1
外部発表はい

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • セラミックおよび複合材料
  • ポリマーおよびプラスチック
  • 金属および合金

フィンガープリント

「Achievement of high coercivity in Sm(Fe<sub>0.8</sub>Co<sub>0.2</sub>)<sub>12</sub> anisotropic magnetic thin film by boron doping」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル