Air flow senser for an insect-like flapping wing

Hidetoshi Takahashi, Eiji Iwase, Kiyoshi Matsumoto, Isao Shimoyama

研究成果: Conference contribution

3 引用 (Scopus)

抄録

This paper reports on a thin piezoresistive cantilever for measuring air flow velocity around flapping wings. To measure the air flow velocity at a point of the wing directly, our sensor was attached to the leading edge of the wing. The sensor was designed to be 1 ?m thick. Because of the scale effect, the influence of the inertial force was small during flow measurement. The sensor had the sensitivity of 0.56 - 0.96 × 10-3 (m/s)-2 as well as the directivity. By using the micro flow sensor, we measured the perpendicular air flow velocity at the point of the leading edge of the wing.

元の言語English
ホスト出版物のタイトルProceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
ページ916-919
ページ数4
DOI
出版物ステータスPublished - 2008
外部発表Yes
イベント21st IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2008 Tucson - Tucson, AZ
継続期間: 2008 1 132008 1 17

Other

Other21st IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2008 Tucson
Tucson, AZ
期間08/1/1308/1/17

Fingerprint

Flow velocity
Sensors
Air
Flow measurement

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering
  • Control and Systems Engineering

これを引用

Takahashi, H., Iwase, E., Matsumoto, K., & Shimoyama, I. (2008). Air flow senser for an insect-like flapping wing. : Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS) (pp. 916-919). [4443806] https://doi.org/10.1109/MEMSYS.2008.4443806

Air flow senser for an insect-like flapping wing. / Takahashi, Hidetoshi; Iwase, Eiji; Matsumoto, Kiyoshi; Shimoyama, Isao.

Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). 2008. p. 916-919 4443806.

研究成果: Conference contribution

Takahashi, H, Iwase, E, Matsumoto, K & Shimoyama, I 2008, Air flow senser for an insect-like flapping wing. : Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)., 4443806, pp. 916-919, 21st IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2008 Tucson, Tucson, AZ, 08/1/13. https://doi.org/10.1109/MEMSYS.2008.4443806
Takahashi H, Iwase E, Matsumoto K, Shimoyama I. Air flow senser for an insect-like flapping wing. : Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). 2008. p. 916-919. 4443806 https://doi.org/10.1109/MEMSYS.2008.4443806
Takahashi, Hidetoshi ; Iwase, Eiji ; Matsumoto, Kiyoshi ; Shimoyama, Isao. / Air flow senser for an insect-like flapping wing. Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). 2008. pp. 916-919
@inproceedings{42ae59f599784a25bfb4e7f517b1c56e,
title = "Air flow senser for an insect-like flapping wing",
abstract = "This paper reports on a thin piezoresistive cantilever for measuring air flow velocity around flapping wings. To measure the air flow velocity at a point of the wing directly, our sensor was attached to the leading edge of the wing. The sensor was designed to be 1 ?m thick. Because of the scale effect, the influence of the inertial force was small during flow measurement. The sensor had the sensitivity of 0.56 - 0.96 × 10-3 (m/s)-2 as well as the directivity. By using the micro flow sensor, we measured the perpendicular air flow velocity at the point of the leading edge of the wing.",
author = "Hidetoshi Takahashi and Eiji Iwase and Kiyoshi Matsumoto and Isao Shimoyama",
year = "2008",
doi = "10.1109/MEMSYS.2008.4443806",
language = "English",
isbn = "9781424417933",
pages = "916--919",
booktitle = "Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)",

}

TY - GEN

T1 - Air flow senser for an insect-like flapping wing

AU - Takahashi, Hidetoshi

AU - Iwase, Eiji

AU - Matsumoto, Kiyoshi

AU - Shimoyama, Isao

PY - 2008

Y1 - 2008

N2 - This paper reports on a thin piezoresistive cantilever for measuring air flow velocity around flapping wings. To measure the air flow velocity at a point of the wing directly, our sensor was attached to the leading edge of the wing. The sensor was designed to be 1 ?m thick. Because of the scale effect, the influence of the inertial force was small during flow measurement. The sensor had the sensitivity of 0.56 - 0.96 × 10-3 (m/s)-2 as well as the directivity. By using the micro flow sensor, we measured the perpendicular air flow velocity at the point of the leading edge of the wing.

AB - This paper reports on a thin piezoresistive cantilever for measuring air flow velocity around flapping wings. To measure the air flow velocity at a point of the wing directly, our sensor was attached to the leading edge of the wing. The sensor was designed to be 1 ?m thick. Because of the scale effect, the influence of the inertial force was small during flow measurement. The sensor had the sensitivity of 0.56 - 0.96 × 10-3 (m/s)-2 as well as the directivity. By using the micro flow sensor, we measured the perpendicular air flow velocity at the point of the leading edge of the wing.

UR - http://www.scopus.com/inward/record.url?scp=50149118838&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=50149118838&partnerID=8YFLogxK

U2 - 10.1109/MEMSYS.2008.4443806

DO - 10.1109/MEMSYS.2008.4443806

M3 - Conference contribution

AN - SCOPUS:50149118838

SN - 9781424417933

SP - 916

EP - 919

BT - Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)

ER -