Air-oxidation and anodization of pitch-based carbon fibers

A. Fukunaga, S. Ueda, M. Nagumo

研究成果: Article査読

74 被引用数 (Scopus)

抄録

Pitch-based high modulus carbon fibers were oxidized in air and characterized using the coulostatic method in order to compare them with anodized fibers. The interfacial shear strength (IFSS) of these fibers to an epoxy resin was evaluated by a micro debonding test. The results showed a good correlation between the differential double layer capacities, Cd, which were measured by the coulostatic method, and the IFSS values for air-oxidized and anodized fibers. In order to investigate the variation of the air-oxidation and anodization in the tow, the coefficients of variation for the Cd and polarization resistance (Rp) by the mono-filament coulostatic method were compared. As a result, the variation of oxidation in the tow of air-oxidized fiber seemed to be slightly larger than that of anodized fiber.

本文言語English
ページ(範囲)1081-1085
ページ数5
ジャーナルCarbon
37
7
DOI
出版ステータスPublished - 1999
外部発表はい

ASJC Scopus subject areas

  • Chemistry(all)
  • Materials Science(all)

フィンガープリント 「Air-oxidation and anodization of pitch-based carbon fibers」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル